Installing SNMP Agent on Linux
Hi I am running the following linux distribution on my machine: Red Hat Enterprise Linux WS release 3 (Taroon) I have installed OpManager on the same machine and wish to configure SNMP Agent on this machine. Should I download new version of SNMP or not. As per the user guide, the installation of new version of SNMP is required only for versions prior to 8. Is my linux version lower that Linux 8 or higher than Linux 8? Regards
Clear Mail
Can someone tell me how to get all of my servers to send a clear message after an issue. I see that I can modify the notification profile directly under the device but I do not see how to do it globally. Thanks, Paul
Which is for me
Hi, I am currently using a trial edition of Op Manager 6. I use a VPN to access clients machines and would like to monitor their servers (perhaps 15 in total) as i access them all via the vpm on 192.168.xxx.xxx ip addresses would it be best to install the Op Manager premium edition and monitor them all via the VPN? It may be that in order to minimize VPN bandwidth usage that Op Manager is installed at each location and I just VPN to the Op Manager web server at each location. Any suggestions? Nick
Memory utilization in Linux
Hi, I am interested in seeing the amount memory used on a linux server. Not the amount that is cached. I want the actual used momory. Is there anyway to do this? Thanks, andrew
Windows disk IO
Is there any way to monitor disk IO in windows? i.e. Using WMI it would be Win32_PerfRawData_PerfDisk_PhysicalDisk, DiskTransfersPersec for example. Thanks
Dependency
Is not working. We got 10 alarms when our t1 went down. I have checked and its still isnt working. Also, url monitoring on a server that is also being monitered, how come it doesnt have dependency? if i reboot the server, and get a server down, why am i getting url down also!?? thanx..
SNMP Trap Processors - problem
Hi, I usually generate traps from MIBs. But after generating traps I am not able to change SNMP Trap Version for that trap. I think that is should be possible because there are systems which support v1,v2 and v3 version. I have attached MIB and printscreen from OpManager. Could you please take a look into this? I would appreciate any information. Thank you in advance. Best Regards, Ivo
Cisco Catalyst 2924XLV- Interface traffic not shown
After adding my the IP address of my switch to Opmanager, the device and some details showed up. I can get reporting on CPU util, memory util, but nothing else. I would like to have the ability to report on Rx and Tx util as well as Rx and Tx Traffic. I tried to test by clicking the 'Test Monitor' button and got the following message: "The Monitor did not respond to the test request" Here's my config from the switch: snmp-server community <password> RO snmp-server enable traps snmp authentication
WAN monitoring and Netflow
Hi All, I am in the process of looking for a WAN monitoring software and I was wondering if I also need to purchase the Netflow Anyalzer to monitor our WAN Our WAN provider owns the equipment and will not let us use the Cisco Netflow. What do I get if I just use the OP Manager as my WAN monitoring solution without adding Netflow Anyalzer Thanks in advance Tony
windows service monitors - not able to alert on all of them?
Hi all, I'm am monitoring some services on a server through windows service monitors. For instance I'm monitoring ASP.NET State Service. I also would like to be notified by mail when the service goes down. When looking in my notification profile under windows service monitors, I cannot select this particular service. Is there a way to get it to work? regards
Linux Memory utilization
Hi, I was wondering if anyone has any success in monitoring the active memory as described by /proc/meminfo? I would really like to use this as the basis of Memory Utilization instead of a process sum. Any help would be appreciated, Thanks
Comparison of OpManger to eHealth and/or SevOne
I am looking to possibly replace my current Concord eHealth (CA) product for a much less expensive one. I have looked at SevOne product and am looking at your opmanager product. Size of monitoring and systems I have are as follows: Network Switches 4 - Cisco 6506 switches 4 - Cisco 4507 switches 4 - Cisco WS-C3750G-12S-E switches 42 - Cisco WS-C3750G-24TS-S switches 77 - Cisco WS-C3750-24TS-S switches Total of appox 3000 ports. Wireless Access Points 72 - Cisco 1200 Access points UPS 27 - APC 1400
Help needed with adjusting/modifying graphs
Hi all, I run into a problem which is quite annoying to me.. :( We've some AKCP Environmental SensorProbes hanging around. We've the 2-ports and a 8-port version of these devices, but not all of these devices are fully equiped with sensors in both or all ports. In 3 of the 2-ports devices we've all ports occupied with a sensor that measures both temperature and humidity. In the 8-ports device we've in port 1-4 watersensors and in port 5/6 Temp/hum. OK.. I've managed to tell OpManager where to get
OpManager is locking out my account!
My user account is being locked out about 6 times a day. At first I thought I had a terminal server session somewhere. But eventually after I did an eventcomb on the Domain Controllers, I traced the account lockout to a new server I built to contain only OpManager. Whenever I shut down the OpManager service, my account stops being locked out. I haven't changed my password at all because its set never to expire. Whatever it is its related to Opmanger. I'm at the point of uninstalling OpManager completely
Custom Monitoring
I am just starting to use Opmanager for monitoring our servers and was trying to find out if its possible to have it monitor/provide graphical information from data that is in a text file on the server. We use virtuozzo for virtual private servers (VPS) and there is a command the we can run on the server that can tell you how much of the CPU is being utilized by a virtual private server in relation to the amount that is actually allocated to that VPS. What I would like to do is put the command in
Recommended backup strategy
Hello, What method/software/etc do you guys recommend for backing up OpManager and its data? Thanks.
OpManager Scaling
How does a single OpManager server install scale? What is the maximum recommended number of devices for an installation where we are monitoring approx 10 services, 4 resources, and approx. 10 misc monitors per machine. Also, does OpManager support Syslog?
discovery blocked by antivirus
hello, one of my customer got a bizzare issue, he is using the following antivirus: Trend Micro version 7.3 while this antivirus is on, he cannot discover this PC, but once it is removed , the discovery goes on correctly, i am going to simulate that in my lab, but wanted to know if anyone has alrady come across similar issues...
ERROR# Access is denied.
Where can I find out and also set the account that Opmanager uses to authenticate itself so that we can discover the network as well as if I wanted to search services on a specific server. When I go into a specific server-->Windows Service Monitors-->Add Monitor --> Discover services on this device, that is where I cannot view services. I get an error which says: ERROR# Access is denied. Why does this happen????
Default threshold settings
Hi, Is it possible to globally change the default setting for a monitor threshold? For example the OS Processor Queue Length threshold is set to "Critical" severity and a single consecutive violation. I would like to globally change this to have "Attention" as the severity and only to be triggered with 2 consecutive violations Cheers Doug
Business View
I am currently running the free trial for 20 devices, do you have more tools to edit the business views in the full version?
Access client via Internet
Hello everybody, i installed OpManager on a network workstation... and it works great, i can monitor the network, but only from that workstation. Can i monitor the network when i'm at home using the internet? Thank you
Custom Monitor Alarm:Threshold doesn't clear itself
I have created a custom threshold for an HP diskdrive failure. The values are 2 when drive is operational and 3-10 when it's not. I set threshold at 3, and re-arm at 2. The drive has been fixed aka value=2, but the alarm is still there. Any help?? Thanks, Mark
Feature request - Notes in event log rules
Hi, Would it be possible to create a "notes" field in the event log rules so that a description of the reason for the event log rule being created can be stored. Cheers, Doug
Error when clicking CPU Utilization View Process Stat Icon
Hi, I always get an empty window with Error (in bold) everytime I click on View Process Statistics Icon in CPU Utilization. Here's a snippet of the log. Nov 27, 2006 1:04:43 PM com.adventnet.persistence.Row validate WARNING: WARNING::The column RULEID in ServiceRuleList is given a value that is instance of java.lang.Integer that contradicts with BIGINT specified in data-dictionary. Nov 27, 2006 1:04:43 PM com.adventnet.persistence.Row validate WARNING: The column RULEID in ServiceRuleList is given
Logfile Messages
Hello, whats the purpose of the followfing messages: 1. "ALERT: Time taken for getting the data for Custom View ActiveAlarms : 31" in "nmsout45.txt" (every two minutes a new line in the logfile) 2. "APPLNERR: Login Failure:" in applnerr49.txt where can i see which device is affected? thank you, martin
SNMP - CPU, Memory and Disk Utilization sometimes missing
Hello, I've installed OpManager build 6005 (running on RedHat FC 3) and I'm monitoring about 150 Solaris 8 servers via SNMP (NET-SNMP version: 5.1.1 on the Sun Boxes). During my testing I've notice sometimes when I go to a system the snapshot either CPU, Memory, Disk will say "Data not available" or just one or two will say it. If I go to test it and then go back to the snapshot view the graph will be there and the "Data not available" will be gone and it will continue working... and then sometimes
Opmanager device snapshot
Hi all, When you go to device snapshot page, every interface (both managed & unmanaged) is displayed in it. Is there any way to remove these unmanaged interfaces from the device snapshot page. (eg. If I'm monitoring a router with serialport, LAN port and some async ports, & I need only to manage the serial port. SO i want only that port to be displayed on the snapshot page) is this possible? thanks & regadrs Sampaths :?:
Blank page with Error! in bold!
Hi, When i click on Resource monitors (for adding them to a device, or for configuring them in the Admin page) i get a blank page with just the text Error! on it .... in the stderr file i find th following: 16:46:33:955 PM java.lang.ArrayIndexOutOfBoundsException: -1 16:46:33:955 PM at com.adventnet.me.opmanager.webclient.util.WebClientGraphUtil.getVector(WebClientGraphUtil.java:433) 16:46:33:955 PM at com.adventnet.me.opmanager.webclient.util.WebClientGraphUtil.getGraphProps(WebClientGraphUtil.java:289)
Problem with boton ,don`t show well the label
I have this problem ,I can`t see the botton well, Helpme please
Sybase Services
Hi all, Anybody can help me, how to monitor Sybase services, instead of Oracle services. Thanks
Busiess views suggestions
Business views are great! Here are some suggestions to make them even better: 1) Text blocks - add a text object to a view 2) Image objects - ability to add images to view that are not associated with a device (an image of an empty rack for example or an internet cloud) 3) frames - ability to add a frame so you could put a line around a group of related devics and label it (with #1 above of course) 4) URL objects - Have seen the work-around of putting in device, not quite the same. 5) Line tool -
Locked out of OpManager
A fellow staff member was recently playing around with the admin account of our OpManager and has locked us out. We receive the follow error message when trying to login with the admin account: "Error in downloading client files from BE" I haven't had a chance to look into it yet or even ask what he was doing when it happened. Does the error message give you guys any clues to solve this problem quickly? Thanks.
Not receaving e-mail notification for devices fails
Hi all, I have created a e-mail notification profile and tested it. Then in the The Quick Configuration wizard i have Assign a notification profile to all devices with all criteria and i'm not receiving the e-mails... any ideas? Am i missing anything? Funny thing i'm receiving the e-mail notification from URL monitors.... Tanks, Manuel Pereira.
device down - notification issue
Hi, I've installed the s/w. Configured and tested email alerting, and when I turn off a server which is monitored, I see the alert is registered but I do not receive any email. Any suggestions?
java error
Loaded latest on gentoo and recieve this error when starting the server script. ./StartOpManagerServer.sh Cannot resolve hostname. Using localhost by default inside addon check SQLException while getting database connection. Check if database daemon is running java.sql.SQLException: Unable to connect to any hosts due to exception: java.net.ConnectException: Connection refused at com.mysql.jdbc.Connection.createNewIO(Connection.java:1794) at com.mysql.jdbc.Connection.<init>(Connection.java:559) at
Multiple Installs of opManager
We have purchased a single user copy of the opManager Premium. Currently we have all of our devices monitored by one server. Is it possible to install the software on another server to be used as a backup server at a different site? Would we need to purchase an additional user license to do this? Is it worth doing? Thanks for your input.
OpManager 6 SSL Support
Hello, Does OpManager 6 support SSL ? What are the steps to be taken ? Marck www.ccv.nl
Custom MIBS for EndRun Technologies GPS Time Server
We are using EndRun Technologies Unison GPS Network Time Servers in our networks. I placed the MIBS file furnished by the vendor in the MIBS folder. How do I get this device to show up in the Vendor Specific Monitors? I have include the MIBS file furnished by the vendor for your review if necessary. Thanks.
Cisco ASA giving back odd snmp data
We are testing opmanager to replace our current monitoring tool but I have hit a snag. Our ASA 5520 reports back this data and I dont know why, cacit works just fine. .1.3.6.1.4.1.9.9.41.1.2.3.1.2.0: 20, .1.3.6.1.4.1.9.9.41.1.2.3.1.3.0: 7, .1.3.6.1.4.1.9.9.41.1.2.3.1.4.0: Syslog Trap, .1.3.6.1.4.1.9.9.41.1.2.3.1.5.0: <166>%ASA-6-302021: Teardown ICMP connection for Am I missing something? oh it also shows as a Cisco 2500 Router... Thx for any help! Mike
Next Page