Use IIS, different Mysql Server
I have another Server with IIS and a mysql - Server already, which has enough resources for OpManager! Is there a way to use a different mysql and webserver? If it is, what do I have to do? (the webserver is not the big issue, but the mysql - server is!)
Add, Delete and change names of the categories
The existing categories doesn't fit in my environment, I need more and different one. How is this possible?
How can I check a systems SNMP status with Opmanager
We are evaluating the trail version of Opmanager. We had SNMP on a couple of our test box hang. Opmanager did not alert us that it was no longer getting snmp info from the test box. Can opmanager check the SNMP status and send an alert if it goes down? We tried creating a service alarm for port 161 and it lists the port as down. Thanks Tom
Unload MIB File
Hi everybody. Can i unload a previously uploaded MIB file, in the OpManager web Mib-Browser ? Thanks a lot.
Questions
1. Is there a way to customize alarm escalations? Meaning, can I just assign a different email address for a particular server and not general servers? 2. How does licensing works? If we purchase a 5 admin license, can I add a 6th user with only read access to servers? 3. For the disk partitions in the resource monitor, can i monitor all disk except the virtual memory and physical memory? Thanks Regards,
FreeDiskSpace Monitor
hi, I am doing a test drive of your OpManager product in our production environment. I have configured a freediskspace monitor in MB (WMI) for my windows 2003 server. I have given the username and password for this in the format machinename\username and then the password. The monitor is able to collect the data in the intervals specified. But when I do a 'test monitor', it always says: " The Monitor did not respond to the test request" Possible reasons 1. The device might be down. 2. The username
Network (../26) discovery issue (OpManager MSP)
Hello, There are issues, when discovering /26 (255.255.255.192) network. We have need to discover network range x.y.z.0 to x.y.z.63 on a one probe and x.y.z.64 to x.y.z.125 on another one. I can not set up OpManager to discover network x.y.z.64 / 255.255.255.192 while it always reports "invalid network address". I am only able to set up x.y.z.0 / 255.255.255.192 and OpManager will create 4 subnets separately, but they are monitored from one probe, I need every single subnet to be monitored on separate
Problems with cisco 2950 & 3750 switches
Hello, I'm currently evaluating opmanager. I've just installed the latest SP and hotfix. My switches are configured to be queried for snmp by the opmanager server. I can read the interfaces, but the counters (errors/packets/discards/etc) stay on "NA" When I test the monitor, I get an error. How can I solve this? Regards, Leon
HP Procurve 4104GL Monitoring
Hi All, I'm new at this so please give lots of detail... I have an HP 4104GL Switch with snmp enabled and I would like to monitor CPU, memory and backplane. I get that there are MIB's and OID's but what do I need? How do I figure out how to monitor these items? THANKS!!! Tom
Adtran Netvanta Firewall
Hi, I have 2 questions please. I recently added an Adtran Netvanta 1224str to our network. It is a 24 port switch, firewall/router in one. 1. If I classify it as a "switch", all 24 ports show up in the interfaces section but when it tries to get traffic statistics, it errors out. If I classify it as a firewall, I only see 2 interfaces, the wan and vlan, but it does give me traffic statistics. 2. I added custom monitors to get the cpu and memory info from the Adtran mibs, but I would like to make
Unable to Launch map-maker
The output from the log is as follows: Wed Feb 22 11:22:29 EST 2006 : Useage : java ProductStarter <Process name> <relative path of conf file from 'product.home' system property> Wed Feb 22 11:22:29 EST 2006 : Wrong parameters. Running with default values Wed Feb 22 11:22:29 EST 2006 : Executing command .\jre1.4.1\bin\java -cp .\classes;.\classes\OpManagerClientClasses.jar;.\classes\OpManagerImages.jar;.\classes\AdventNetLogging.jar;.\classes\OpManagerBeans.jar;.\classes\OpManagerCharts.jar;.\classes\jcalendar.jar;.\classes\GenVarPanel.jar;.\classes\NmsClientClasses.jar;.\classes\AdventNetSnmp.jar;.\classes\JimiProClasses.zip;.\classes\crimson.jar;.\classes\AdventNetUI.jar;.\classes\AdventNetUtils.jar;.\classes\ApiUtils.jar;.\classes\ManagementClient.jar;.\classes\AdventNetCLIClient.jar;.\classes\AdventNetJta.jar;.\classes\AdventNetSnmpV3USM.jar;.\classes\AdventNetAboutDialog.jar;.\classes\jnlp.jar;.\classes\AdventNetCCLLibrary.jar;.\classes\AdventNetProBeans.jar;.\classes\AdventNetNPrevalent.jar;.\classes\AdventNetUpdateManagerInstaller.jar;.\classes\jfreechart.jar;.\classes\jcommon.jar;.\classes\jgraph.jar;.\classes\jasperreports\jasperreports-0.5.2.jar;.\classes\jasperreports\itext-1.01.jar;.\classes\jasperreports\poi-2.0-final-20040126.jar;.
Domain Controller alarm
I keep getting this alarm on the domain controller AuthenticationFailure : .1.3.6.1.4.1.311.1.1.3.1.3 ADNY Hardware: x86 Family 15 Model 2 Stepping 9 AT/AT COMPATIBLE - Software: Windows 2000 Version 5.0 (Build 2195 Multiprocessor F The SNMP star is working and it is pulling data in. Any idea what could be causing this?
WISH LIST ITEM - New Category - Thermometers for Data Center
We've purchased TCP/IP connected temperature probes to monitor our data center, and a couple of our MDF rooms. Late Friday night in fact, our airconditioning unit(s) which have no TCP/IP monitoring capability, shut down. (common breaker was tripped). Opmanager began sending pager notiications after servers had already begun shutting themselves down due to thermal thresholds being exceeded. As of today, we have TCP/IP connected devices from Tempager, each with 3 temperature probes on them, located
Editing Collected Data
Hi there. We had a problem over the christmas period. We have the MSP edition of the product and before christmas, the probes we have on our customers networks were all working ok, all SNMP and WMI monitors and status's were fine. However over the christmas period the OpManager probes services repeatedly died and upon restarting today they would work for SNMP but not for some WMI monitors, weirdly enough they worked for all exchange monitoring, and even default windows services such as DHCP server,
UPS Socomec mib file
Hello, I am currently testing OP Manager and find it fine. Because we have a UPS Socomec I try to add his mib file to OP Manager and get the following error message : -- Error parsing MIB:NetVision-1.2.mib Exception while loading MIB:Could not parse the file C:/Program Files/AdventNet/ME/OpManager/./mibs/NetVision-1.2.mib The error occured at the line no: 1835 ,column: 9. The 'ASSIGNMENT' or 'DEFVAL' keyword may be missing. or In case of table entry, the ACCESS value may be other than 'not-accessible'.
UPS Socomec mib file
Hello, I am currently testing OP Manager and find it fine. Because we have a UPS Socomec I try to add his mib file to OP Manager and get the following error message : -- Error parsing MIB:NetVision-1.2.mib Exception while loading MIB:Could not parse the file C:/Program Files/AdventNet/ME/OpManager/./mibs/NetVision-1.2.mib The error occured at the line no: 1835 ,column: 9. The 'ASSIGNMENT' or 'DEFVAL' keyword may be missing. or In case of table entry, the ACCESS value may be other than 'not-accessible'.
Change Scale Of Network Utilization And System Uptime
Is there a way to change the scaling on two monitors. The first is a SNMP custom monitor I add which is system uptime in seconds. It is sort of annoying to look at the graph of the uptime in seconds when the number is 1.5884E ETC. Can I modify this to be minutes or even hours? Secondly the graph of network utilization is annoying since I have a gigabit ethernet adapter that thing is always super low, is there a way to scale it down to the max of 100MBS? Thanks?
Starting OpManager In CentOS --ID=0 --ID: Undefined Variable
Hello, I just installed OpManager into CentOS Linux 4.4, all went OK. Currently I have apache, mysql, and php all tested on the operating system, they all work. When I attempt to start OpManager: ./bin/StartOpManagerServer.sh I get the following output and opManager does not start. ID=0: Command not found. ID: Undefined Variable Thanks for any help resolving this issue.
Can't change custom device type icon
I have a custom device type that I created a while ago and have associated to a few devices. I'm just trying to change the device icon image, but can't...if I select a new image file and hit OK, I get a message saying "Device Type modified successfully", but the icon is unchanged! This happens no matter which image I choose to change it to. I am able to change my other custom device type icons without a problem, so it's just related to this one. I took a look at the log files on the server but nothing
Availability servers
Today we suffered from a power outage. While the probe was working again I couldn't see if a server was working again or not. Is it possible to make a change in the maps layout so that you can actually get an overview with ping results? A kind of "alive board" so I get a picture of my network status. Because we have quite a number of servers it was impossible to get an general idea which server was started and which was not. With kind regards, Dimitri Emmen
Antivirus block port 25, fail to send email notification
I am facing the problem where McAfee8.0 blocks the SMTP port 25 & I am not able to send email notification. When i disable the McAfee, the email notification is working fine. What is the .exe file of OPManager that send out the email notification so that i can exclude that particular .exe file in McAfee?
Monitoring exchange 2003
We have 3 exchange 2003 servers instaled on our network and we want to monitor them but we can't do this. All services on these servers are been monitor well (web, disk use.. etc) but not exchange. We have installed SNMP and WMI on the servers but still doesn't work. �How can we do this?. Thanks.
Anyway to tune default AlarmMessage variables?
Hi all, I'm puzzled with a question. I've configured a custom monitor to monitor Temperatures (in degrees Celsius). After a short while I enabled Thresholds for this monitor. Basically: GenerateAlarm when OID-VALUE/Instance is during 'one consecutive time' greater then Threshold=X, then Severity=Trouble, AlarmMessage='Temperature exceeded ThresholdX C', ClearAlarm when OID-VALUE/Instance is during 'one consecutive time' less then Threshold=X-1. Right now OpManager displays this: Temperature exceeded
Create Tickets in Helpdesk.....
...how does it work and which Helpdesk software.....as you know u have two diffrent versions of helpdesk Software(Servicedesk plus and Support Center, do both work?)! Yours Oliver
MS SQLServer monitoring
Hi We have an installation of MS SQLServer, but we cannot monitor it properly from OpManager, as we also get an error on the service. We have checked the SNMP, port for service, Windows password, etc, and everything else seem to work fine; also the new update (Jan 2nd, 2007) is installed on the server. Can anyone give a tip on what to check?
Problem with AIX monitoring
During our test with AIX monitoring, we are getting a high CPU utilization which is correct but when we look at the details what uses most CPU, it doesn't show the correct utilization per process. We are also getting incorrect values both for the disk and memory and it always show 0% utilization, what may be the problem for this? We are sure that the monitors' (via telnet/ssh) passwords are correct. Thanks
problem in generating report
when i generate all device utilzation report , it does not include some device utilization such as netscreen CPU utilization , netcache proxy , some version of PIX how to fix this problem or how to manually select which array of values is xx utilization thx alot
New Feature Request - Links
In business views, I'd like to see links between devices added to a new device group called "Links" or something similar. We could then have a page of links and their states. Next, the link objects could be specified in another device's dependency section, so you could monitor a device only if the link were up! This would also allow one to configure a business view that listed all links that were circuits, which would give you a single page with the status of all your circuits. Since we can add additional
Ap 1100 Mib
Is it posible to add more WIFI option in MSP, in other words. Add the wifi manger into MSP. Within MSP it is not posible to read Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.3(4)JA, RELEASE properly
Acknowledge versus Clear
Hello, We've noticed in the course of our testing that Acknowledging an issue will not stop the escalation process. Is this intentional, and if so, is it configurable? Some issues take longer to fix than the escalation time, but we dont want to clear the error and just have it pop back up every X minutes. We feel that we should be able to simply Acknowledge the message and that should in-turn stop paging. Is this a configuration option I'm missing? Thanks, Pete
Monitoring MSMQ Queue Length with WMI
Is it possible to create a custom WMI monitor to watch the queue length of the MSMQ or other applications or services that do not have SNMP MIB's? Thank you, -Eric.
OPManager service crash
hy everybody, i use OPManager 6 Pro Edition Build 6012 since few days the opmanager windows service "ManageEngine OpManager" crashed, In the wrapper.log file see follow error Connection to the Database is lost. Server is being Shut Down INFO | jvm 1 | 2007/01/08 10:18:20 | Please Restart the server INFO | jvm 1 | 2007/01/08 10:18:20 | ##################################################### this is unportable! since this error i ponder, is this the right tool for us? We have a lot of trouble with it...
CPU Graph Dial Wrong
Hi there. In the snapshot page of any given server or domain controller, they use different CPU monitoring information to chart the dial graph. On a standard server the CPU dial graph is created using "CPUUSAGE Percentage" which is fine as shown in screenshot "ProcessorTimeRight.JPG". However on a domain controller, it uses "_Total % Processor Time" which is not the same and shows different types of results between servers, some are weird results such as I have attached in the screenshot "ProcessorTimeWrong.JPG"
RepairDB.bat with MSSQL Backend
Hi, I currently have opmanager 6 SP1 installed on a win2003 server with MSSQL 2000 backend data base. After installing the 6012 hotfix, when I logon to the server there is a message saying: "Oops looks like a few tables got corrupted. Don't worry.. Run RepairDB.bat from bin directory and restart the server" This RepairDB.bat looks like it works for MySQL installations. What can I do to fix the problem with MSSQL? I have run the RepairDB.bat file and restared the server and this has fixed nothing.
Adding specific monitors
I want to monitor performance of Processor and Disk via the processor queue length and disk queue length. I notice that if I change my server type to Domain Controller I do have a Processor Queue Length (WMI) monitor. 3 questions: 1. Is there a way to add the Processor Queue Length monitor to other types (eg. servers)? 2. Is there a Disk Queue Length monitor (I can't seem to find one)? 3. How do I add other WMI monitors (I can add SNMP ones)? Regards, Craig
ASPX Pages?
I can't seem to monitor ASPX pages using OpManager. I thought I saw somewhere that the latest hotfix (6012) corrected this problem? David.
If SNMP required for Interfaces now?
If my memory serves me correctly, shouldn't you be able to monitor Tx and R x traffic without the need for SNMP? I know for a fact I have done this before, as my previous environment prohibited SNMP service being installed on the servers. Nevertheless, I was still able to set up interfaces to have monitored in Opmanager.
Procom MIB
Hi all, someones know where I can find some MIB for Procom Netforce 1750 and 1800? I require them to monitor server temperature, but I can't find them, also because the official Procom site is offline long since. Thank you! Daniele
Hi
hello
How i Must configure Mail Settings If i have an Exchange
How i must configure the mail setting option if i don't have a smtp server, just an exchange server, course that server has a SMTP. Regards
Next Page