OpManage Device Snapshot not showing any data
I am adding Cisco routers to Opmanager and the device snapshot is not showing any data for any of the graphs. I have confirmed that the credentials are correct and when I test some of the monitors via the snmp OID, they are successfull. Can anyone help? Thanks.
Visio data connection to OpManager SQL DB
I want to import device details into Visio using the Data Connector function to talk to the SQL database. But unfortunately I do not know which tables to connect to! I have my network diagram in Visio and want to link the device details such as Device Name, IP address, category, sys description, etc. On a different view in Visio I wish to pull in some performance data for the devices. Can you tell me which (of the hundred-ish tables) I should use?
Multiplenode and Multiple graphs definition
Hi all, checking on forums and KB I've saw a description of graphtype that describe those kind of graph in this way: If you choose <multiplenode> when associating the monitor, you will get an option to choose the instances. For <multiple> it will show the all the instance value in the graph when you click on the monitor. Now I have a question, I see that for example Disk space is a multiplenode graph but when I add any kind of disk space monitor on a device I don't get any kind of choose of what
OpManager No data showing in device Snapshot
I have devices that are reachable, but for some reason under device snapshot none of the graphs are displaying any data. Response time, Packetloss, CPU utilization, Memory Utilization, and Temperature are not showing up. I have already verified that the SNMP comm strings are correct. Can anyone help ? Thanks.
suppress alarm with report
I've a bit question for suppress alarm feature. when using the suppress alarm , that mean downtime will calculate in the report or not . (for case device down or interface down) I think the suppress alarm, just alarm so the downtime which occured will to calculate in the report. which diffrence from the schedule downtime which the downtime will not to calculate in the report . * I'm try to find the answer all the forum and user guide , but not have . please clarity to me. Thanks.
info
je ne vois pas le lien ADD MONITORS dans la page de l'onglet admin de opmanager
Is there any procedure to modify predefined monitors to replace OID if any device doesn't match old one?
I have few Devices of juniper which includes (Juniper M7i Router, SSG140 firewall, J6350 Router) which OIDs either not included in OpManager or not correctly responding in order to display required information. Also i wanted to create new Infrastructure view device category but i don't want inheritance monitor from predefined category however currently i didn't find any option to create new category without inheritance. Please help me out and i am ready to share SNMP OID's of devices if you need
Feature request. A new "Modify Device Template"
Been doing allot of work with OpManager and found that the "Modify Device Template" section is rather lacking. There are may thing that should be part of the template, but have to be changed on a system per system basis. Such as notification profile, or service monitors. So here is my idea. Make the "Modify Device Template" look just like a "Snapshot" of that system type. From there make all things editable. Like the dial graphs. Support things like binding dial graphs to different monitors. Any
Error: "Device already present in the System" but I can't find the device in the OpManager console
I am trying to add a device from Admin->Add Device, but I am getting an error message stating: Device already present in the System. I have looked through the console but cannot find a devices with the IP address of the device I am trying to add. Any idea how I can get this device to add in OpManager? License Type : Deluxe Build Number : 8722 Latest Version :N/A Expires on : Never
OP Manager Customer
Who is OP manager customer in malaysia ?
Can you get me MIB file of Network devices?
Dear All, I want to get MIB file of specific devices. so I manage the performance (CPU/Memory Utilization, Temperature) of these devices. For example, Nortel Alteon 2207, => CPU: .1.3.6.1.4.1.1872.2.1.8.16.1 => MEM: (.1.3.6.1.4.1.1872.2.1.8.12.1 * 100) / (.1.3.6.1.4.1.1872.2.1.8.12.1 + .1.3.6.1.4.1.1872.2.1.8.12.2) => Temp: .1.3.6.1.4.1.1872.2.1.1.6 - Notel ERS 8300 - Nokia IP 390 / IP 330 - Nortel Alteon 2208 / 2424 - Intel 550T - 3Com 4900 / 17700 / Baseline - Alcatel OS6850 - Cisco C1720
Inconsistent data in Domain Controller
Hi Team, We get inconsistent data from a few domain controllers and Exchange. Some data like LSASS,NTFRS,Cpu,Memory works, but other data is all N/A, We run the wmiadap few times on the system, but the problem continues on the systems. Logs and screenshots attached herewith http://bonitas.zohocorp.com/customer_uploads/2011_1_7_3_54_1_OpMan_logs_Jan_7_2011_11_46_4.zip thanks Gopi ME Tech
Monitoring Exchange 2003
I'm using OpManager 8.7 and wished to monitor our Exchange 2003. I've setup the WMI credentials which have tested correctly and i'm able to see my CPU/Memory/Disk utilization with no issues. However, the Exchange dashboard is showing up as N/A. This has happened to 2 different Exchange servers. Is there any special step to configure our Exchange for monitoring?
Alarm dissapears once the problem has been cleared
Hi, We are new to Opmanager and I cant seem to find anything that may resolve our problem. Over the weekend we had an outage that caused a number of alarms to trigger , however when we look back at the alarm history we see all the clear status however dont see any other status once the problem has been cleared. We need to be able to review back over the alarm history to see when problems happened in a single view. Thanks Brett
dx
how we can display AIX /TSM server in Opmanager?
how to specify the consicutive time (ex 3) for notification
i have created a mail notification, and associated it to a URL in opmanager 7.0 but i want to set the consecutive time, example if i set the time to 3, and the URL monitors fails for 3 times continuously, then only opmanager 7.0 should notify me. not for the every failure. How to do this?
OpManager NCM Plug-in 5450 Released
Hi, We are glad to announce the release of OpManager NCM Plug-in build 5450. We take this opportunity to thank all our customers and users for their feedback and the continued support. Highlights of NCM Plug-in 5450 New Features & Enhancements Provision for viewing the configuration versions of all/any device(s) by specifying a custom date range Provision to mark configuration changes as authorized/unauthorized in bulk New Device Models: Cisco Nexus 7000 10-Slot Switch (N7K-C7010) Cisco Nexus 5010
How to monitor an attached iSCSI volume for availability
We have a RHEL Linux server which is a VM (the VMFS is hosted on a SAN storage device) but the system also uses an iSCSI attached volume from a NAS device for its database. How can we monitor/check the availability/capacity of the iSCSI attached volume from within OpManager.
Feature request: List view for UPS's
Since the list view tab only shows CPU and memory utilization, it's not very useful for UPS devices. Could a list view for UPS's be created that shows %UPS Load and Battery Charge %?
Resend the Alarm notification If it’s not acknowledged.
Hi, I notice the OpManager will not send email notification if it is already sent earlier. Yes, it is okay to avoid sending the same notification many times while we are working on resolving the issue. But what if no one acknowledge the alarm? Then it will stay forever until someone login to OpManager Web Client to check the status So, i would like to have OpManager to send email notification on every status pull until someone acknowledge the alarm. -- Regards, Anandharaj System Engineer (Unix /
Suppress Alarm
Hi, I would like to check, is there a way where we can suppress all alarm related to the network interface? I can do this in "notification profile" (to avoid send email on network interface related alarm), but then in OpManager it will still trigger an alarm. Basically, i would like to monitor all the interface in my Cisco switch as i will have an overview on how many interfaces are active and the Rx and Tx status. Since the end user that connected to the switch will shutdown the PC daily, it will
I want to see discards/errors without seeing up-down events on interfaces. Any ideas?
I have student ports I would like to monitor for errors or discard excessiveness, but don't want events to come through when they connect and disconnect their computers. Will I have to unmanage the ports or remove them and lose everything monitored on them just to stop the updown events? Thanks.
How to regenerate Network Views
Hi, In my network views page, there are few subnets display but only 1 subnet view can click. How do i regenerate this view as i guess this view is auto generated when add the servers. -- Regards, Anandharaj System Engineer (Unix / Linux)
Include last polled value in monitor widget
Is it possible to include th elast polled value in the Monitor/Threshold widget in the devide snapsnot? The only way to get the value is to go to edit the threshold.
Schedule Reports for multiple recipients
Is there a way to schedule a report to be sent to multiple recipients? When I put in more than one recipients I get this
PROBLEM ADDING A DEVICE
When I'm going to add a device its says that it is on the system, but in the search it doesnt appear as in the dashboard, i need help with this.
Device Template For multiple 2003 servers with different thresholds?
Say I have several classes of 2003 application server. Monitors are using WMI. A) Type 1 that needs to say monitor free disk space by GB, threshold of less then 10 gigs. B) Type 2 that needs to monitor disk space by GB, threshold of say less then 50gigs. It would appear you cannot create two device templates using the same OID or name like "Windows 2003". So you make one with a OID "Windows 2003 A" and "Windows 2003 B" but now you cannot apply the profiles to any devices because the list of devices
How can I run OpManager as service in Linux
How can I run OpManager Build 8052 as service on CentOS 5.4 Linux server.
CPU and Memory Utilization for F5 Big-IP 3600
Hello, Running OPmgr 8721. Trying to get CPU and Memory Utilization for a device running 9.4.6. I have downloaded and loaded the mibs from here: http://www.oidview.com/mibs/3375/md-3375-1.html It is a multiprocessor device. Most of the monitors that were created for the 3600 template work, except for CPU and Memory. This OID for CPU in the template returns nothing: 100-(.1.3.6.1.4.1.3375.2.1.1.2.1.42.0*100/.1.3.6.1.4.1.3375.2.1.1.2.1.41.0) Likewise for the Memory OID: (.1.3.6.1.4.1.3375.2.1.1.2.1.45.0*100)/.1.3.6.1.4.1.3375.2.1.1.2.1.44.0
Reports
Is it possible to publish a report in html format, say every 5 minutes to an FTP site to be uploaded on a different web server? We have a web facing application utilising around 6 servers, the monitoring is done on a server that is not accessible to the web. We want to be able to provide high level visibility of the servers availability to the board and customers. The best way that I can think of is if the MAP can be published every 5 minutes to an ftp server or such... Is this possible? Thanks in
When I click on the Virtual Devices MAP it shows Error!
Virtual Devices Maps results in Error! So far all the other maps seem to work. Anyone else having this issue? I can find the VM's if I search for them.
Plugins
1. Opmanager plugins have two kinds? a. Integration with Opmanager b. Installed separately
can i integrate event log analyzer in opmanager?
now i'm running opmanager free edition in a Linux box, i need windows event logs. is it possible to integrate event log analyzer in opmanager.
not discovering devices
I had two problems: 1) I couldn't get the software to run after it was installed as an NT service. The startup would hang and fill up the log files with this repeated over nd over: 15:02:38:421 PM ##### PROBLEM IN INITIALIZING MODULE class com.adventnet.nms.eventdb.EventMgr ##### I uninstalled and reinstalled a number of times. And by the way, the uninstaller doesn't remove or stop the mysql process nor could I find it listed in the Windows Services. I had to manually kill it. 2) I finally got
Rediscover now Window Prob
Hello Member, my Problem is the Window from "Rediscover now" is to small, Ican´t Scroll to the send Button. Plese help :).
importing images for maps
how do you import a map or image to be used as a map
Unexpected OpManager Shutdown
Recently our OpManager service shutdown without warning and we went a number of days without even realizing it. OpManager logged the event in the Windows Event Log as: "There were 2 failed launches in a row, each lasting less than 300 seconds. Giving up." A second or two later, another event was logged as: "There may be a configuration problem: please check the logs." I've seen this issue in a few other threads but there didn't appear to be any specific root cause. Is there anyway we can
WMI Performance Issues and hotfixes
Hi Gabriel, Here is a good article from MS on WMI issues. http://blogs.technet.com/b/kevinholman/archive/2009/06/29/getting-lots-of-script-failed-to-run-alerts-wmi-probe-failed-execution-backward-compatibility-script-error.aspx Of particular interest are these three items: 1. Apply http://support.microsoft.com/kb/933061 This resolves a LOT of issues on the Windows 2003 OS with WMI. This should be one of your first steps. This applies to x86 or x64 Windows Server 2003 SP1 or SP2. 2. Registry
Where can download apache.zip to enable SSL?
i want to enable SSL,but i can't download apache.zip use URL http://bonitas.adventnet.com/opmanager/12Sep2007/apache.zip please tell me right URL
WMI is not showing in Credential Library when creating new
i installed opmanager free edition in a Linux system. For configuring Event logs need WMI credential, But it is not showing in Credential Library, it showing only SNMP v1/v2, SNMP v3, TELNET/SSH. What i've to do?
Next Page