OpManager: Change login page
I want it to display corporate logo. I know you can change it in Service Desk.
OpManager SNMP
Hi, I am new user of Op Manager as recently i have configured the 4 Cisco routers and 2 switches on OM without any error and i have enable SNMP on router. but in windows Desktop i am facing some problem its not showing Graph Report CPU Memory and disk Utilization on Dashboard and how can enabled SNMP on windows as i have started the SNMP services on desktop but no result.In Op Manager Credential Setting i am choosing Public and other but problem not resolved. can any one help on this regards, Thanks
WMI Monitoring is very probelamatic
Hi Opmanager Support. We are monitoring a few Windows devices using WMI. DOmain controllers and some exchange server .The value are very inconsistent. some monitors are working. some are not working. please find the screenshots and some logs attaached. we also ran the wmiadap.exe \f command a few times on the servers. but the problem still exists. http://bonitas.zohocorp.com/customer_uploads/2010_12_22_9_1_45_logs.zip thanks Gopi ME Tech
Import devices and DB
Hi All, We have 1 Prod Opmamner setup and one more for QA. We have trial license on QA. I have just setup this environment. In order to replicate the same scenario, What all should i import from Prod to QA? Also i dont want all the notification profiles to be imported (otherwise there will 2 email triggers for the same alert) instead a common test profile has to be set up for all the devices. Any other things i have missed out please let me know. Regards, RK
Using Net Send for alerts
I am trying to send alerts via net send using a notification profile. I have set it up as I think it should be, but it will not test the profile correctly. The test never finishes. The attached picture shows the settings I am trying. Does anyone have this working or any ideas? Thanks Tim
Router Functionality?
Does anyone know what the "Routers" are used for in OpUtils? I know what a router is and how it works ..... just how does OpUtils utilize this device? Maybe the better question is: What information exactly does OpUtils get from a configured "Router"? Please be very detailed ..... The underlying reason is that I am trying to find out where OpUtils gets its infromation for IP<>MAC assignments because I am missing many of them. I would assume it gets this information from the ARP table in the Switches
Unable to add the Criteria when adding notification profile
No matter what device I try to add a notification profile to, and no matter which criteria I use, I get a "Unable to add the Criteria" This happens across the board. Any ideas on the cause of this? Thanks, Marc
Wrong time in Alerts
Hi, We are getting the incorrect times in alerts sent to us. The time on the server running op manager, plus the time on the server being alerted on is correct. We did notice that the time on the 'real-time interface view' is incorrect. Can somebody please let me know how this can be fixed. Many thanks.
Remove or Unmanage For Interface
Dear All, I've question to difference of remove and unmanage interfaces , anyone can tell how to difference of function or have other idea to using . I want to using the opmanager feature and function which've suitable with structure of program. Thanks
Adding twitter account not working
Hi, We're having problems adding a twitter account to OpManager (Build 8721). We created a twitter account soly for this purpose and tried adding via Admin -> Twitter Account Settings. I enter the twitter userid and password and hit save and OpManager just keeps loading forever (I had it loading for 2 hours yesterday without anything happening - no errors or confirmation that it's saved). I've also made sure OpManager has internet access etc. Any ideas what could be wrong? Regards, Jan
Adding vendor monitors for a Dell server
I have a number of Dell poweredge 1950 servers that I have setup in opmanager using the "windows 2003" device profile. This is working fine however I would like to get some more detailed monitoring such as tempurature, fan /ps failure. Is there an outline or step by step instructions on how to accomplish this? I downloaded a MIB from Dell but i'm not really sure where to go from here. any help would be greatly appreciated. I should add that I have snmp up and running and it passes the credential
Problem with Business view
Hi everyone, I'm having a problem with a business view. When I click it on from within Maps > Business view, I get the error message "No Infra Structure View found with this name." I try to create a new business view with the same name and it lets me save it, but I still get the error message. The business view name in question is "Charlotte". I've attached the log files for any information. Eric
Cannot load Adtran Mibs
I get the following error after I import the MIB and try to select it: Error parsing MIB:adAosCPU.mib Exception while loading MIB:IMPORTS failed: Could not find the file : D:/PROGRA~1/MANAGE~1/OPMANA~1/./mibs/ADTRAN-AOS MIB is attached
Environment monitor
You can use the OP to monitor temperature and humidity with a monitor via SNMP the Comet System Model: T3510? The same is a mini webserver of Lantronix, but when you start the automatic search it detects only PING does not open window for temperature and humidity. I need to monitor this data to generate a report of weather conditions data center. I imported all the MIB's successful, I can read the desired value via snmp get, but not have automatic windows. http://www.cometsystem.cz/english/humidity-transmitter-Ethernet.htm
Configure a notification profile and apply to a specific Alarm
Hello, I added a new performance monitor in a windows 2008 template. This monitor is a Free Space of Logical Disk (Unit C:). Can opmanager apply a notification profile that only affect to this performance monitor over all windows 2008 devices?.
Assign existing custom links to new devices
Hi all, I have created a customlink to open the webbrowser of my managed device. it is simple: http://$ipAddress When I created this custom links, I had it assigned to the devices I had then. Now I added some more devices, where I want to use the same custom link again. When I add the same link again I get the message that a link with this name already exists. How can I assign an existing link to a new device? Regards Juergen
Change to Snapshot page
Hi, I would like to know if it's possible in some way to alter the aspect of the snapshot information page for a new Infrastructure view. I'll try to explain what I would like, I've 2 idea in mind for example to enhance the snapshot info view of my netapp storage but I don't know if it can be done in any way. I've already create a new Infrastructure view for mystorage, what I would like to do is something like this: 1) Being able to have a space on the page just like the AD Monitoring, SQL Server
Auto-Discovery
Hi All, I have almost 20 devices added daily and 20-30 removed every alternate day. Is there any way to auto discover devices, every stipulated period of time? Thanks, RK
Feature Request: Server Make and Model informaton
Would like to be able to see server make and model information (preferably in the Device Details widget on the main page of the device) and have that info available to produce reports. Like: IP Address: 12.34.56.78 Make/Model: HP ProLiant DL360 G6 Category: Server Type: Windows 2003
Notification Profile based on Alert type
Hi All, We have 3 email ids to be configured for three different alert profiles i.e. Critical: email goes to Level-3 Engineers Trouble: Email goes to Level-2 Engineers Attention: Email goes to HelpDesk. Let me know how to get this configured. Regards, RK
SNMPv3 Polling Stops Working
I am in the process of setting up OpManager. At first it was going fine and everything was working. After a day or two of monitoring, OpManager will no longer correctly use SNMPv3 credentials. -The same credentials and devices were working properly initially -Run snmpget from same computer using same snmp credentials and works fine -Add SNMPv2c and SNMPv1 credentials to network devices and OpManager works fine -Delete credentials and devices, then add all back and still not working -Tried RepairDB
HP Proliant - Need help finding MiB/OID for Internal Hardware LED status
In addition to the specific hardware monitors we have setup in OpManager, I would like to setup a general failure alert when the servers Internal Harware LED changes from green to amber or red. However, I have not been able to find the correct MiB/OID for this. Is anyone else using this monitor or know in which MiB/OID it can be found? Any help appreciated. Seth
IfName or IfDescription in Subject of Alert
Dear All, If I would like to using the Interface Name or Interface Description in Subject Mail. How should I do or Opmanager can't. And Severity of the Alarm can't define the problem which alert. such as we want to know status up/down of device or interface. Threshold Alarm of cpu / memory / traffice / packet drop / error counting on interface. Surely I'm using this feature with orther software . What's reason - Just see at subject , we can know what's happends at here . Shortest time for
Status Message Unable to find the object
Status Message Unable to find the object what does it mean
OID Translation trap processor message
Hi all, I have a Trap Processor that receives SNMP v1 traps from a Cisco router when the OSPF Neighbors change its state. The Message field is: "OSPF Neighbor on router $SourceMO(sysName) changed. The neighbor $3 is $4 (down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8))." The $4 is the OSPF-MIB (attached) 1.3.6.1.2.1.14.10.1.6, named ospfNbrState. The values are translated in MIB to: down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6),
Can a widget open a widget?
Hello, I'm hoping somebody can provide some assistance I've previously had a discussion about creating widgets to view opmanager status outside of Opmanager, see link http://forums.manageengine.com/#topic/49000003900013 This is working fine, but there are 2 areas of concern before we release it to staff 1) The "widget" display only appears on the top level - is there any way so that as you drill down through the business view it stays within the widget - at the moment, the first click open
Alerts issue
The issue is specifically for disk/cpu/memory usage on the server. eg. Whenever the disk space exceeds the threshold value of suppose 75%, I get an alert. I have set the successive alerts every 5 minutes thereafter. But these successive alerts shows the same value of disk usage as it is in the first alert, though it is increasing due to some scheduled backup or any other process on that server. Is it possible to get the current value in the successive alert? Attaching the alerts, the original one
Add new device from code
Hi, I'm evaluating OpManager and everything seems to be exactly what i need, however, I need to be able to automatically add a new device, and get the monitordata from this device (like the rest API in manageengine). Where can I find this?
Move OpManager install to new server
We would like to move our install to a new server. It is currently on Win 2003 R2 32bit, we would like to move to Win 2008 R2 64bit. The server would also have a new name. (The current name does not meet our naming convention). Is there a procedure to follow to install clean on new server / migrate database, etc?
Lets you specify the OID for windows.
There are several SNMP devices, but the OP does not have automatic windows, it would be interesting if you could set that defines the OID value of the window so manual.
Convert SNMP response as string to integer
Hi I want to configure a custom monitor for one of my devices and then configure a threshold for it. The problem is that the response from the device for the OID is a straing value and not a numeric. Is there a way to configure a custom monitor and convert the string value to an integer value so that I can configure the threshold? I have tried to setup the monitor with Add Bulk Monitor and configure it as a numeric, but it does not work. If I do a test monitor, I can see the value, but the monitor
Problem with creating Business View
Hi, I have downloaded a 30 days trial version for Ops Manager. When I tried to click on the create new business view, it shows a cross gif on the browser. The browser which I am using is IE8. Please kindly advice.
Cisco WISM (wireless) not showing up in OpManager
We have 3 Cisco WISM blades, each having 2 IP addresses. When we discover them, the first one we discover shows up correctly in the OpManager system, and the other 5 add without errors, but they do not show up. What should we be looking for when they are added? They do not show up as unknown or as anything else. They all have the same credentials. Thanks, Jeremy
VMware vSphere 4 in distribuited edition
Hi how will be availlable the montoring for VMware vSphere 4 in Opmanager Distribuited Edition ? Davide
List view for CPU's with multiple processors.
We are running build 8724. I have noticed the list view for our servers indicates showing 1-97 of 07 servers. They are not all displayed. I have to click the name column to get a reverse sort to see the last ones. I have tried to change the number shown but the last ones never are displayed. It appears that this may be associated with the multiple listings for CPU's that have multiple CPU's. Will this be fixed with the fix for the multiple listing problem?
Login as admin from user machine
Today I have started seeing a problem with loging in from my desktop machine. I enter the user name (admin) and the proper password. OpManager responds with "Please enter the user name". I can log in from the server. After a restart of the server I was able to log in, then the same thing happened latter. Please advise. Note we are waiting on a 5 user license. The order should have gone in yesterday. Thank you, Regards, Jim Millard Canyon County Idaho
Convert values integer OID.
Hello I'm using the OP to monitor temperature and humidity of my data center through a monitor of Comet System: http://www.cometsystem.cz/english/humidity-transmitter-Ethernet.htm. I imported the MIB, I created the device, read the OID value through specific, but the value is an integer and must be converted to decimal value. Example: The read value is 213, which means 21.3. How to make this conversion? You can generate a graph of variation with the decimal values? Does anyone have any experience
snmp not working on some servers
I have 8 Proliant servers and only 3 are able to get cpu and memory and disk stats. I have snmp enabed on the server. I have tried the mib browser which I don't understand hopw to configure to test. Why do 3 servers work fine with opmanager? Second question is I got the web client to work with one host running opmanager, then I moved the opmanager to another server and I can't get it to run. What is the procedure to get this to run.
WMI Problem in opmanager
Hi Team We are working on a customer site and we face this strange problem. We are using WMI on most of the systems and we use the WMITEST.exe file for testing the WMI working or not. It gives output in the wmitest, but when we use in opmanager, it fails WMI - Test Credentials.From the forums, we tried the vb script option to give the username and password and domain and it fails with Error # The RPC server is unavailable. Error # Object required E:ManageEngineOpManagerconfapplicationscriptscpu.vbs(56,
Where to look when device says imported successfully but is nowhere to be found?
Imports of a device succeed but do not show up anywhere as a device on the infrastructure snapshot. Ideas? Which log file should I look at for the error?
Next Page