SNMP Traps - HOW TO?
I have already asked this is a previous post but with the following TRAP that was sent how "EXACTLY" would i create a SNMP TRAP Processor to pick it up so that I can set it to a lower priority level. .1.3.6.1.4.1.9.9.41.1.2.3.1.2.0: 20, .1.3.6.1.4.1.9.9.41.1.2.3.1.3.0: 4, .1.3.6.1.4.1.9.9.41.1.2.3.1.4.0: Syslog Trap, .1.3.6.1.4.1.9.9.41.1.2.3.1.5.0: 305005: No translation group found for icmp src Furthermore only clogMessageGenerated is available when you use the "Load traps from Mib" for the CISCO-SYSLOG-MIB.
Unknown OS
I ran a discovery on my Datacenter subnet and all of my servers (400 windows 2000,2003) came up as unknow OS. We ar e currently only using WMI becuase SNMP was never installed on the servers. Is there a way to change the OS type on all of the servers at on time or do i have to click through 400 servers to change it.
oracle snmp
Hello, Can somebody help me to configure oracle snmp. I have linux machine with oracle and net-snmp. How to configure oracle or net-snmp to show information in opManager?
No detection of OS etc
My SNMP to my 2003 servers works great. But it won't detect the OS version and other thing. While WIFImanager detects this out of the box. How can this be?
slow performance of opmanager post sp1 install
Hi I upgrade to sp1 build 5510 yesterday, and the new functionality is appreciated. However I am finding that the web client has slowed down to an absolute crawl when using it compared to build 5504. Previously, navigating screens would take 1-3 seconds each, now it takes > 10 seconds to go into the snapshot for a device. Opmanager is running on windows 2000 server on a p4-2ghz with 512mb ram. Any info you can give would be great Thanks Dave
Error adding service
If adding a service to an Windows NT 4.0 Server I receive the error: see screen print.
SP1 build 5510 bug check
Hi is there a bug with the interface TX/RX Utilization Thresholds, after upgrading to SP1 all my router interfaces keep alarming
OptUtil Cisco CLI change
Does OptUtils for the cisco tool support AAA/ACS login to retrieve the access-list? Under My Home | settings | CLI Is there a way to run optutil if cisco ACS is used to authenticate the login? AAA is setup to authenticate twice for user and privledge mode? Thanks any help would be appreciated.
How to manage bandwidth sharing in a cafe
please let
OSX Servers
I Already enable the snmp of my G5 and Xserve with OSX ver. 1.13 but somehow I cannot monitor and manage its resources.
how to monitor status of active processes
How can I monitor the status of certain active processes? Looks like you can since there is a summary list of active processes shown in the device info list. I want to build alarms based on certain essential services going down. ie. Process Process Status Process Type init runnable(2) application(4) migration/0 runnable(2) application(4) migration/1 runnable(2) application(4) keventd runnable(2) application(4) ksoftirqd/0 runnable(2) application(4) ksoftirqd/1 runnable(2) application(4) kswapd runnable(2)
Problems with OpManager 5.5 SP1
Hi there, Since upgrading to SP1 I seem to be getting authentication failures on all my devices? Also if I update a device name e.g a switch it doesn't seem to retain the name, it reverts back to IP address again. :(
Time out of Op Manager GUI
Hi, After the upgrade of Op Manager to SP 1 (5510), I found that even after I selected "Automatic Refresh" at 1 minute, I am still timedout after 10 minutes, and I need to re-login again. Any ideas? Paul
MySql Issues
I am getting this error as of tonight and I cannot seem to figure out what it means. Exception occured while forming SQL to get Total Count; nested exception is: java.sql.SQLException: Syntax error or access violation, message from server: "You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'WHERE Alert.ID >0' at line 1" I just edited the database config file to use my own instance of mySql which is 4.12 and on port
Fortigate 800 MIBs
Hi, I've been having problems with detecting my Fortigate 800s correctly. All interfaces detected are wrong, and I can't get CPU and Memory utilization. Support has replied back this morning that testing was done on their Fortigate 400s, and is working fine on their Fortigate 400s. I believe the 400s and 800s are vastly different, and are probably running on different instruction sets. I have attached the MIBs for the Fortigate 800. Is anyone able to advice on how I can get the MIB compiled and loaded
snmp on different port problems monitoring environmentals
Hi I'm new to Ops Manager. Just set it up, verified net-snmp install on my target device as per the instructions in the user manual. I set the community and port strings accordingly we use a non standard port for snmp (e.g. 6969) however op manager does not appear to be able to communicate. my community string has a period in it. could that also pose a problem? ssh monitoring is ok.
Problem with a custom monitor for printer
I'm trying to set up a custom monitor for my printer to show in % the toner supply. With the MIB browser I found these two monitor: .iso.org.dod.internet.mgmt.mib-2.printmib.prtMarkerSupplies.prtMarkerSuppliesTable.prtMarkerSuppliesEntry.prtMarkerSuppliesMaxCapacity and .iso.org.dod.internet.mgmt.mib-2.printmib.prtMarkerSupplies.prtMarkerSuppliesTable.prtMarkerSuppliesEntry.prtMarkerSuppliesLevel If I check this two everything goes right but the custom OID I setted up (.1.3.6.1.2.1.43.11.1.1.9*100)/(.1.3.6.1.2.1.43.11.1.1.8)
using ssh on other port than 22 for Resource Monitors
Hi, I want to use sa connection for "Telnet/sa based monitors for Solarise". But sa port on my servers are not on default port value 22. Where can I change port value in OpManager used for sa? Regards, Yannick
Device Type/Category & Services
HI, I have been testing OpManager to monitor our fleet of ATM (cash disperser) machines. Having looked at 11 other products, OpManager comes closest to shat I need. ATM's have a number of sub-system components (Card reader, cash dispenser, Receipt Printer) all of which need monitoring. I particularly like the Server view exposed by OpManager where services appear a little indicators on the main server Icon. I have three questions; 1. Can I create a new device category that mimics the Server view?
New device type/category
When adding a new device type, there should be a pulldown with the category of the new device type (router, firewall, etc.) so you don't have to manually edit the opmanager_categoryInfo.xml file to add in the new device type names that get matched on discovery.
Linux Deamon
Hi i have a Linux server and want to monitor a deamon if that is possible. How can i do this???
OpManager Device Types/Services
I am testing OpManager to monitor our fleet of ATM (cash dispenser) machines and OpManager is the closest fit I have seen for our needs (I've tested 11 different products!). Each ATM has a number of "services" i.e. Card Reader, Dispenser,Receipt Printer etc. The OpManager Server view (icon with green service states) would be my preference. Question 1 How can I add a new Device Category "ATM" that would mimic the Server category? Question 2 Is it possible to have monitors that behave (have the same
URL Monitor
Hi, After configuring my URL monitor, I tested to see if it was working. It worked, but I am getting the alert from noreply@adventnet.com. How can I change this? Paul
Reporting Feature
Hi, Would it be possible to have reporting for URL monitoring? I would like to be able to report on the uptime of my monitored URLs. Paul
OpManager on Windows 2003 sp1
has anyone installed OpManager on 2k3 with sp1? if so is there any secret to it. i have tried several times and the service will not start and when i start it manually is just shuts off after a few minutes. any help would be appreciated. Thanks
Op Manager Support slow??
Hi all, Anyone experience slowness in the replies from support? conversely, I am starting to feel that queries are often answered faster in the forum than in support. I wonder why I'm paying so much for support when my mails to support are not answered. Paul
Product/Documentation feedback
The documentation is difficult at best to find anything. Downloaded the .zip, the .pdf hangs about 2/3 through so I cannot get it downloaded. Really unimpressed at this point. Unless I can get this thing figured out and running and working the way "it is supposed to" in the next few days, my recommendation on this product will be don't buy. We are only trying to demo it and it has taken 2 weeks and MUCH frustration to get to this point and it isn't even completely setup yet. And from the looks of
Cisco Catalyst 4006 Switch
Sir, I have a Cisco Catalyst 4006 Switch. But the CPU Utilization alway show 0. Why? The OID for this device is correct. Sam.
Service Pack 1 for OpManager 5.5 Release Notification
Hi All, We are pleased to announce the availability of the Service Pack 1 to OpManager 5.5 (Build 5510). The latest version of the product can be downloaded from the below url: http://www.opmanager.com/download.html Users who are already with OpManager 5.5 (earlier Build Versions 5501 to 5504) should apply Service Pack 1 to upgrade to the latest version (Build Version 5510). Users of OpManager 5.0 (Build Versions 5004 to 5010) should first apply the Upgrade Pack to migrate to OpManager 5.5 (Build
MySql Issues
I am getting this error as of tonight and I cannot seem to figure out what it means. Exception occured while forming SQL to get Total Count; nested exception is: java.sql.SQLException: Syntax error or access violation, message from server: "You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'WHERE Alert.ID >0' at line 1" I just edited the database config file to use my own instance of mySql which is 4.12 and on port
User Manual Inconsistancy
Im trying to figure out how to build custom SNMP TRAP Processors and the user manual does not coincide with version 5510. below is a snip-it from the manual. On the right, select Load Traps from MIB under Actions is not in version 5510. Plus I need to know if <OpManagerHome>/conf/mibsToBeLoaded.conf has to have mib files loaded in order of thier dependencies. Basically im trying to load the needed traps for Cisco Access Point 1100's so that the traps i get from remote users authenticating and de-authenticating
Repair Database
We had a hard power outage the other day. I tried to use the repairdb.bat in the bin folder. I receive this error message ever time I try and run the bat file. myisamchk: MyISAM file ..\mysql\data\OpManagerDB\alert.MYI myisamchk: warning: 1 clients is using or hasn't closed the table properly Can you please provide some guidance on the situation. Thanks
How to use Existing MySQL and Apache
Hi, I am trying to install OpManager in my Redhat Linx 8.0 box that already running Apache and MySQL server. But after installation I found that OpManager itself install another instance of Apache and MySQL. Is it posible to configure OpManager to use existing Apache and MySQL?? Regards Nemo :?:
nmserr.txt
what does the following mean? 08:50:34:750 MISC: -------RDBMS related information------ database product name = MySQL database product version=4.1.11-standard database driver name=MySQL-AB JDBC Driver database driver version=mysql-connector-java-com-3.0.9-stable ( $Date: 2003/10/02 15:36:12 $, $Revision: 1.27.2.25 $ ) database user name=mysql@rts.internal.rXXX.com database URL=jdbc:mysql://172.29.XX.XX:3306/OpManagerDB3 ****************************************************** 08:50:43:656 ALERT: AlertObject
Is the availabilty/ping monitoring result reportable?
I would like to poll the ping result and display them as a graph. Is the ping result has round trip time, packet drop ratio stored? How to graph them, similar to traffic graphs? Thanks, Min
How To save the events older than 30 days on a disk
In the db maintenance settings you can specify the number of total alarms stored into the database and the time frame older alarms are deleted. Is there the a possibility to store the alarm database to a disk for audit reasons?
Custom Temperature probe
Anyone knows if exist an OID to monitor temperature on motherboards with chip Winbond W83697HF? Thanks a lot.
Hi CPU Utilization
Hi, I'm monitoring thru WMI a 4 processeurs Win2000 server. It shows 98% CPU used on each processeur but it's not the reality... Most of the time it's only 2% used... Any idea ?
Sp1 conflist with Ciscosecure software
I tried updating to Opmanage build 5510. Unfortunately the Windows Opmanage service now won't start saying 'Port 2000 port needed for opmanager has been occupied by some other application'. Which is right! It's occupied by CiscoSecure ACS which is also installed on the server. Build 5504 didn't have this as as requirement. Why 5510? Also I've tried changing the NMS_BE_PORT value in wrapper.conf but no luck, I still get the same error. Is there a way around this as I'd prefer not to go back to 5504?
Monitor Print Server
Sir, I would like to monitor the print server. Like AXIS, Intel and etc. They are little bit different with printer. Is it possible to have a separate "Infrastructure Views" and customize "Snapshot" page? Sam.
Next Page