Error Parsing to load ENVIROMUX.mib
Hi, I got this message: "Error parsing MIB:enviromux-mini.MIB" I tried to modify the file without success, If somebody can help me. Thanks all for your help.
User Upgrade + starting remote software e.g pcanywhere
Hi all, I got 3 questions: first, is it possible to start with one user for the pro version and then buy a second or third one or may I have to reinstall opmanager when I buye a new user license ? second, opmanager can launch a programm. is it possible to make an entry for remote software such as pcanywhere which I can run directly from opmanager ? last but not least, when an error occurs and an alarm is send is it possible to clear the event via cmd/shell without entering opmanager ? That�s all
Sys Desc Not Updating
I am managing seven Adtran routers for remote offices using Opmanager 6005. The Sys Desc reflected correct information when the routers were originally set up for management. Since then we've upgraded the OS on all the devices but the Sys Desc still shows the previous version - even if I rediscover the device or update status. Why?
SNMP good in MIBBrowser but not OpManager
Hello, I have successfully used the MIB Browser to load my MIB files, connect to my device, and poll in with SNMP v2c. So the device is setup properly. Then I attempt to add the device to OpManager Release 5.5 Build 5504 and the device is not listed as SNMP compatible, but as a ping only. Why idea whats going on? Everything I've read states to verify the community string. No problems there. I've read the entire product manual, I found one error, and nothing of any help. Searches on the KB also lead
OpManager receiving traps on two different ports
The VoIP telephones I work with send SNMP data out to management apps on two different ports - port 162 for standard SNMP and 12010 for QoS related data. Applications are available from the VoIP equipment supplier that receives and processes the data but I was wondering if there was some way of configuring OpManager as an alternative to these applications? If so, how?
data not available in Disk Utilization On Novell Server
Dear all, I couldnot collect the disk utilization data on opmanager from Novell Server. But, I could collect the CPU & Memory utilization without any problem. Can anyone tell me what's going on & how to solve this problem? Appreaciated your guidance! Thks, LC
Display Maps on Plasma Screen
I would like to display the maps created using Business Views on a Plasma display. However, I would like to be able to do this without displaying all of the menus etc. at the same time. All I want to be able to see is the map with no other information around it. Is this possible? Regards, David
OpManager 6, scheduled reports feature
I love the new scheduled reports feature, and all the cosmetic changes and bug fixes. However, what I really would like now is the ability to run the custom reports for each of my devices on a schedule. I'd like to dump reports for a large number of my servers that consist of CPU Utilization, Memory Utilization, Disk Utilization, Network traffic/utilization. You cannot do this with the current scheduled reports option. Also, is it possible to get an eval for both MSExchange and MSSQL monitoring?
OpManager MSP Edition Released
We have released the MSP edition of OpManager. This helps VARs, System Integrators, and Managed Service Providers to remotely monitor their customer networks from a central location. The one key difference between existing versions of OpManager and this new MSP edition is the probe-server architecture which helps data collection behind a firewall. Central server resides in the NOC and probes are installed in the customer locations. For more details on this product or to try a 30-day trial copy please
SNMP in Windows
Hi all, I have a question. what is configuration on Windows 2003 for SNMP? we are going to use OpManager. Bold,
Can't load juniper mib
I am trying to load this mib for a Juniper IVE device. Everytime I try to load it through the website or the java mib browser it always gives me an error. I have attach the mib, is it something wrong with the mib? This is the latest one for my device. Thanks
Service Desk integration problem
I am running Service Desk Version : 5.5.0 Build Number : 5501 in a 30 day demo and Opmanager v 6.0 build 6005 free edition. I am trying to setup the integration to Service Desk in Opmanager. I fill in the required details and get: Unable to fetch values from ServiceDesk Plus, The server might not be running or the network traffic may be too high. I tried both my username and admin/admin. the stdout2.txt log has this error: 10:21:54:250 AM Login form post: HTTP/1.1 200 OK 10:21:54:250 AM actionClass
Oracle Monitor problem (urgent) !
Dear all, I am trying to add Application Monitor==> Oracle Monitor on any server but when I click on test monitor of any service of oracle like Tablespace Used then I gets this error; The Monitor did not respond to the test request All other monitors of all servers are working fine except this application monitor and SNMP service is ok, all threshold is ok, but this is giving me error, 1) Can we monitor only one oracle tablespace size monitor in this option ? Plz help me in this regard. Asim
filter specific traps
Hi, I would like to know if there is a way to tell to one host to ignore some traps that we don't care? Is it possible to do via the configuration files? I know that we can disable some traps but they will be stored in Unsolicited traps. In fact, I would like to ignore them in such a way that they are not recorded in the database... Thank you very much!! Regards
Get OPManger to discover Fortigate 300A
Our OPManger has discovered our Fortigate 300A firewall, but it believes it is a router. I can change this so it shows up as a firewall and I can change the device type to Fortigate 300 (since 300a isn't in the list). 1) Is there a way to get OPManger to correctly recognize it as a Firewall if I were to delete the device? 2) Is there a way to get the Fortigate 300a in the device type list? 3) And I see that it pulled in the interfaces on this device, but for one of the devices it shows it as IF-xxx.xxx.xxx.xxx
Scan Error
Hi there ! Please help me with this... The network scan does not show all the machines in the network of 1500 machine only two of them are shown i can manually add device by giving there ip address but rescanning the network also dont work ! The ip addresses are : 10.1.40.* 10.1.11.* and so on... I tried to add all of them but still why is the network scan not happening ! From my experience on other sites i have seen that after giving the network address, immediately the network icon of the machine
Questions
I have a few questions and things I would like to find out before I order. We are a hosting company with many resellers so they like to disply the stats of things on there site so keep that in mind here. :) 1. Is there any XML out put of the server status? 2. I know it comes with one admin user but does it happen to have a guest login that can't make changes so users could login to see a status of a server? 2A. If there is no default guest account could we buy another user and make it a guest. The
0x800706ba in wbemtest
I looked at http://manageengine.adventnet.com/products/eventlog/eventlog-troubleshoot.html#6 to find out why my wmi cpu load was not working. Indeed my firewall was enabled on my xp machine. The fix worked OK. Although, I have the same problem with a Windows server 2003, while the windows firewall is not enable. Any Idea ? The server is running stand alone (not in a domain). I specify PCNAME\USERNAME, and its local password for the password information in Opmanager MSP. Regards. J.
OP Manage dont restart Windows Service
Hello, I have add a new windows service, Op Manage detect it when is stopped but i don't restart the service. But i have configure the monitoring for retarting the service. the windows account is correct ? How i can troubleshoot this problem ?
Internal Server Error
Whenever I try to access the Web panel, I get an internal server error, the logs aren't much help, I already looked. Any ideas? I've got Apache on Windows.
Threshold violated, alarm message customization !
Dear all, Can you plz tell me how to customize alarm message when any device violate threshold limit. My current message is given below; ORADEV C: is below 2GB. : FreeDiskSpaceInGB - C:\ Label: Serial Number 64a26fe1 : Curent Value : 6 : Threshold value : 7 : Severity : Attention : Rearm Value: 8. Machine:ORADEV. Status:Attention. Time:Aug 28,2006 03:13:19 PM I want to remove few things from this alarm message because I cant able to receive whole message on SMS. plz help me accordingly. Regards;
SNMP Parameters Error!
Hi, I'm running the evaluation version (build 6003). When I go to Admin->SNMP Parameters, i get an "Error!" message with no other information. Why? -Phil
OpManager ODBC?
Is there a way to edit the OpManager data in the MySQL database using an ODBC driver? Thanks. - Darin
I see new release in 1-2 weeks, whats in it?
Just noticed on a previous post last week that a new version is coming, can we have an idea of what to expect?
Cisco 7206VXR
We are starting to trial the OpManager system and I'm trying to get a Cisco 7206VXR monitored. OpManager doesn't seem to have much support for this router although it's a VERY popular series in the Cisco family.. Can anyone tell me how to get the 7206VXR running with OpManager? Thanks in advance...;)
OpManager MSP backup
Hi, How do I backup OpManager MSP ?. Is it the same as with the stand alone version ?. If so, I am assuming I would have to run backupdb.bat /sh at the central console and at each probe. Correct ?.
EventID 7034
Can't start Opmanager on XP machine. I have a eventid 7034. The ManageEngine OpManager service terminated unexpectedly. It has done this 5 time(s).
Active Directory Monitor
I have been useing the Active Directory Monitor and it is working as i expect it. But if one of the ad services Goes into error i cant get it to log a ticket in support desk. It has a notification profile that does not requeir any citeria and i though that would do it but i still can get it to log a ticket and it does any type of alarm
Newbie questions
With the normal apologies if these have been covered before. I scrolled down the forum and couldn't see them mentioned. 1) A number of the PCs that we are monitoring at client sites are switched off when their users go home. This means we get flooded with errors at 5.30pm each day. Is there a way of handling these differently to for example, a PC that we know should be on 24/7? 2) Is there a quick way to scan the network again without losing the currently logged settings. I installed the probes over
loading the db backup of ver5.5 to ver 6 or latest version
hi there. i just want to ask you how to back-up load the back-up of db from ver5.5 to ver.6 of OpManager. the management wanted to load that db files to the existing and new version of OpManager. please help! thanks in advance; ariski
Router discovered as Desktop
Everytime i add a cisco router it is recognized as a Desktop Equipment. I forced it to Router but the interfaces and other information is not added on it. Do you have any idea to solve it?
Notification Profile Scheduling
Greetings, Is there any way to schedule a Notification Profile to be active during a certain time, such as an Outgoing Traffic Monitor on a T1 that is linked to a Notification Profile that only alerts during after hours? What I'm trying to do is setup a monitor that will tell me if my T1's WAN NIC breaks my currently-set threshold only from Fri 8PM - Mon 3AM PST. I want to monitor outgoing traffic on the weekends when no one is at work, and an alert that the outgoing traffic threshold was broken
Rate of Drive Consumption Monitor?
Does OpManager have or could it be added - a drive rate of consumption monitor? Its useful to know how much hard disk space one has free, but it is even more useful to know historically how that space is consumed at a glance. Replacing the disk utilization with this icon would be a nice option. David.
When I import cisco router Opmanager puts it on Desktop
When I import cisco router Opmanager puts it on Desktop device and when i change the cathegory of device it makes it incomplete without interfaces and so on. I reimport it and again to the Desktop device. It works sometimes fine but others not. Please help i wanna buy it but if there is some bug there i wanna be sure to get the solution. Regards M&M
URL Monitoring Reporting
I have setup a number of URL monitors. I would like to extract the polled data (page response times) to generate some reports ... I am TOTALLY unable to find the data in the database, if its in the usual statsdata tables then I'm looking straight past it! Help. Adventnet it would be VERY VERY useful to produce a document describing the tables, data in them, relationships etc to help those of us trying to produce more sophisticated MIS reports out of OpManager. Cheers, Andrew
Problems running OPMANAGER in MS Internet Explorer
Hi all, I got a problem with op manager and ms internet explorer. I connect via internet explorer on port 8060 to the pc op manager is running. Enter the username and password and I get the main page. When I try to open one task e.g. Router the internet explorer returns to the logon page. What can be the problem ? Cookies are enabled security is on minimum When I use the firefox erverything is running well. Thanks a lot for the help in advance Kai
Windows Service Monitors
I'm using the free version of OpManager 6.0 - all the monitors work fine except for the Windows Service Monitors (IIS, DNS Server, Event Log, etc.) - when I set them up they initially report 'OK', but then they always change and report 'Service Is Down' after 5 to 30 minutes, even though the services are up and running fine. Any ideas on what may be the problem? Thanks.
OPM+Netflow integration
Hi, I am trying to integrate Netflow with Opmanager. I have configured the servername, port, username and password. When I click on the netflow link under a specific interface I am requested to authenticate before I can view the data. Shouldn't Opmanager pass the authentication information I have provided earlier to Netflow? Thanks Ramzi
Error Loading Adtran MIBs
Attempting to add some MIBs for Adtran routers but am getting the following: Exception:Reading/Parsing MIB:java.io.FileNotFoundException: Could not open file C:/Program Looks like it hates the program's install path. Ideas?
Not getting any port information at all
I am testing the trial verison of Oputils 3.2 with service pack 2. When i start the probe nothing is returned, no port information, no mac addresses. We have a Cisco 3570 switch stack, and are able to run other snmp utilities with our community string. Out community string is a complex alpha numeric and special characters, are there any limitations with passwords? What esle could i be missing. Any help would be great Brandon
Next Page