problem monitoring localhost (where opmanager is installed)
I got this error: User credentials cannot be used for local connections Following this tip doesn't work: http://www.manageengine.com/network-monitoring/help/troubleshoot_opmanager/troubleshoot_wmi.html#80041064 There are 2 problems: 1. After I removed the windows credential, I can no longer add any new wmi monitors. I get error message saying I need to supply username and password. 2. I cannot use device template I found a work around by specifying a dummy username/password. However, it doesn't
There is no possibility to add new device or device is present.
I searched for the decision of the problem and have come across it: http://support.opmanager.com/sd/AddSolution.sd?solID=1808 But these scripts of cleaning of base are not suitablefor MS SQL, but only for mysql. Where can I get a utility for MS SQL 2008 + OpManager 9011? And another question, is there any way to verify the integrity of the database OpManager ? Thank you!
monitoring tablespaces in oracle 10g
i have tested my credentials for both CLI and SNMP for my Oracle server running in Linux and they have passed. I have added the monitoring tools for tablespaces and nothing is being monitored. i have used the mibbrowser tool to test ORADB-MIB and i am getting 'Request failed or timed out. No error'.. what am i missing out? regards
The DB of Probe OPM has been destroyed
Hi support team, Yesterday I have backed up the DB of standalone OPM(8812), and then upgraded it to v9010, backed it up and then upgraded to v9011, and then backed it up. According to the link"https://opmanageree.wiki.zoho.com/Standalone-to-Probe-Migration.html", I migrated the standalone OPM to Probe OPM. After migration, I started the service and input "localhost" in address, it said that some tables of DB have been destroyed and please run the "RepairDB.bat/sh" to repair the DB, then
Ability to select one of switches/routers devices.
Dear All, Ability to monitor for selecting only major ports in the several devices(Switches/Routers) in Widget. - Table or Graph in realtime. For example, Thank you in advance.
OpManager and VMware
How can I disable alarms on ESX Servers when a VM is powered off? Thanks in advance Fabio
Crystal Reports with OpManager
Hi ! We're researching the use of Crystal Reports to generate reports from the OpManager database. But there are so much tables in the database, that we're wondering if there is some overview where is outlined what information is stored in which table and how. This would make the process mich easier.. I hope somebody has this outline. With kind regards, Martijn Janssen
who can share the service package of 9010
Now I am testing the Enterprise version of OPM, and want to have the service package of 9010 to upgrade my OPM standalone v8812, then migrate it to probe. I have submited the form and waited some times. My customers has urged me all the time. So I want to know where the download link is or who can offer and hope you can share with me Thanks and Regards, Tira
Upgrade Netflow plug-in to 9000
My Opmanager build is 8812 and when upgrading the plug-in with UpdateManager (.\NetFlow\bin) it starts the upgrade, but there is now progress. I have encountered this problem before (I had to reinstall a previous build from opmanger to restore our latest back-up and upgrade again) and the support engineer (Tim Woods) stated the following: ".... It seems that the RAW data stored is very huge, it will take time to delete all the raw data entry. So, please allow the updatemanager to run, once it complete
my devices are in the maintentance mode !! how to change its mode to normal?
Availability How to change the mode to let us monitor this device ? Thanks!! //Oyster Liu oysterliu@gmail.com
OPMANAGER - Mail server settings.
Hi Friends, I'm using the latest Opmanager version (Free Account) and I'd like to know how to configure the maisl server settings for a google (gmail) account. I'm receiveing the following error: "530 5.7.0. Must issue a STARTTLS command first. b4sm55998828and.18" Observation: I've have checked the option SSL ENABLED but didn't work. What I'm doing wrong? Thanks a lot! Att, André Mascarenhas
Can't install the enterprise netflow analyzer plugin
Hi support team, I want to test the netflow analyzer plugin with the OPM Enterprise central edition in one server , but when installing the plugin, it said i have to upgrade the opm to the lastest version and then install the plugin. But my OPM enterprise edition is the latest version 9011 64bit and the plugin is 9000 64bit why? Thanks and Regards, Tira
server monitor (performance monitor)
i cannot monitor 05 monitors in server monitor Bytes Received Bytes Total Bytes Transmitted Traffic received Traffic transmitted
VMware Threshold Alerts
Hi I have setup my VMware 3.5.0 host servers on OpManger (9011) and configured the notification profiles to send when 1 poll is missed and when any Threshold Rule is violated. However no alerts are being sent. When I check what is covered under the threshold setting it tells me that I don't have any set, even though they were automatically setup during discovery. Am I missing something very obvious here? Cheers.
LoadXML
After dicovering devices I keep getting a loadxml error.
Adding new sub interface
We face problem in adding new sub interface for the existing router,opmanager see the subinterface but N/A . why this is happening
Hyper-V in OpManager 9
I added two Hyper-V Hosts that are part of a two node cluster. Metrics are collected and displayed on the Host Servers but none of the VMs are collecting except for one per Host. The one per Host, which is collecting, is not collecting or displaying correctly.History reports reflect the same problem, only one VM shows up. If I failover the VM that does collect (but incorrectly) it moves to the other Node but still does not collect correctly.
How to monitorig disk queue length?
I need to do monitoring disk queue length on win2k3 & linux OpenSuSe11.3 servers. It is possible? If yes, then how? Help pls )
URL-Monitoring does not work with dependency
Hello together, i have the problem that my dependencys are not working with the URL-Monitoring configured on several server. That means i will not get any alarm-message if the server is not available if the dependend device is not available, that�s correct. But i will get a false-alarm regarding the URL-Monitor configured on the same server. Can anyone tell me how to configure that the dependency is also working with URL-Monitors in the serveral server? What i am doing wrong? Greetings Peter
Enabling SSL
Is the method detailed here under Getting Started - Enabling SSL in OpManager still the way to do it? I thought this had been superseded?
how to monitor sun blades in opmanager
Hi Team, I want to monitor sun blades through oracle integrated lights out (oilo) ip. I have added the sun blades and opmanager successfully captured the details but it is not showing data in cpu, disk and other performance monitors. Regards Abhishek
WMI failed
I get this error message on most of my machines however with same domain admin credentials WMI pass on some machines I have tried the troubleshooting guides of OPmanager. Please help ?
Unmanaged devices
Unmanaged devices count as a 'used' licence. We have a few LAB VMWare servers with about a hundred machines that are purely lab machines, testing and simulation servers... How can I set them in 'unmanaged' state but without using a licence? I only need to monitor the hosts in this case, not the virtual machines they host.
Alerts Dependency
Is there any way to stop URL Monitor Alerts when Web Service is down? We get both type of alerts. Ideally if IIS/Apache is down, we should only get alerts for the service & not for URL monitors as it obvious they'll be down
The history of device
after I had recreated a router i had lost the history of this device. is this history could be back?
95th percentile reports of CPU and Memory utilization
Hi there, Is it possible to create a 95th percentile report of CPU and Memory usage by device in OpManager? The report showing Min, Max, Avg really isn't very helpful because when you are capacity planning, what you care about is "typical peak" utilization. It would also be great if CPU and Memory could be combined into one report, but if they have to be separate, so be it. Thanks, Andy
unable to retrieve windows 2003 snmp cpu utilization data
Hi, I need help with configuring windows 2003 with snmp. This is not a OpManager issue. I am not able to retrieve snmp cpu utilization data from a windows 2003 machine. I have installed snmp service and verified the snmp credential is correct. However, I am not able to get snmp cpu utilization (.1.3.6.1.2.1.25.3.3.1.2) from the machine. Note that I am able to retrieve this information from a windows 2008 machine. Using a snmp tester tool, I got following from the 2003 machine: 1/30/2012 5:52:49
Symantec EndPoint Protection
2 Weeks ago I installed Symantec Endpoint Protection and Manager on the server that I also have OpManager on. Ever since I have done this the SEPP has killed OpManager, not allowing it to run. I contacted support on this subject and they logged into my server and shutdown the SEPP and then started OpManager and it worked but when I start the SEPP back up here is the message that I get from OpManager: Internal Server Error The server encountered an internal error or misconfiguration and was unable
OpManager, unmonitored services on server raise alarms
Hi every OpManager Users and supporter, For a more or less long time i have a strange behaviour. I got some particular alarms concerning a service, which is NOT monitored on the server from where the alarms come (and the service ITSELF doesn't run on the server) In the screenshot, i got an alarm that pervasive SQL service is down on the server XXXXXX,... but as you can see, THIS service is not monitored on the XXXXXX server (but it runs and is monitored on another one...which was NOT down...) How
sms profile
Hello. We install a trial version of Your product Opmanager 8, and testing, is it that software , what we want , a then bought it or. I want to ask, is it possible to create a SMS notification profile, that contains a 3-4 mobile number, like as a email group. CAn anybody help me, please
unable to edit or delete credential with \
If the name contains \ character, the credential can not be edit or deleted.
SMS
Hi I'm having a problem with the GSM Modem, I can't connect it to opmanager It works fine if i connect to COM1 (9600) .. AT OK AT+CGMI SIEMENS OK AT+CGMM TC35i OK AT+CGMR REVISION 03.01 OK AT+CSQ +CSQ: 28,99 OK But with opmanager, it says "Modem is not connected properly. Check your settings!" On the config file SMSServer.conf ... phone.batch_incoming=-1 sms_split=true phone.batch_outgoing=-1 phone.sim_pin= serial.port=COM1 database.type=MYSQL phone.delete_after_processing=no general.raw_in_log=./misc/incoming.raw
Exception while loading MIB for Cisco MDS 9000
I am trying to import a Cisco MIB (CISCO-SYSTEM-EXT-MIB) into OpManager and I am getting an error: Error parsing MIB:CISCO-SYSTEM-EXT-MIB.my Exception while loading MIB:IMPORTS failed: Could not find the file : D:/Apps/OPMANA~1/./mibs/CISCO-TC I am attaching the MIB in question. Regards, Eugene
Trending Disk Growth, CPU Utilization,etc.
I'm new to the product so excuse my ignorance. I would like to be able to report on a monthly basis the following: VMware Virtual Machines (Individual Machines grouped by OS - Windows and Linux) Disk Space Allocated Disk Space Used Disk Space Free Memory Allocated CPU Utilization ESXi Hosts Datastore Space Size Datastore Free Space Datastore Provisioned Space I have not been able to find this information within the "canned" reports. Is this information stored in the database where a custom
ManageEngine vs Orion vs Spiceworks
Is there a comparison chart that someone can point me to? Thanks Sam
Launching RESOURCES for template sharing
Hi everybody To make it easier to share templates across ManageEngine customers we have opened up a new portal called RESOURCES. See picture below. If you are using OpManager you can now export your script monitors and workflows as XML and share it with fellow users here. For now the sharing is manual where you have to do the Create new resource, attach xml, and post job. Also the sharing is restricted only to scripts and workflows. (monitoring templates not available now) Going forward when we release
Any way to edit multiple notification profiles?
Hi, I have around 20 notification profiles (SMS) and around 30 devices on them. I want to change the poll from 5 to 3 but the only way i found is with the wizard on admin section, but i need to remove all and add all again, But I have more then 100 devices and have to choose manually from them, now multiply 100x20 and you imagine the trouble in front of me :S thanks in advance. best regards, Nuno Franco
Device URL required in Email alert for direct Redirecting to the device //Opmanager
Hi Team, we require option like if any email alert s send it should have URL of the Network Device ( Example: http://172.16.0.1) where we can login directly to the device, is this Option is enabled on Opmanager Build Number : 9000 ? but this option is available after loging into the OPmanager we need that option on EMail alert as well. Regards, Karthik
Increase Response Timing
Hi, I just have migrated OP manager behind Cisco ASA firewall but after that we are getting increment in devices response time which was working very much fine when OP manager installed over lan. Speed and duplex is fine on OP manager machine. Kindly do the needful Regards, Arshad Ahmed
32vs64 ??
Hello, Is it possible to migrate database from 64 bit to 32 bit version and vice versa? What does 64-bit version compared to the 32-bit? txh
Next Page