Script execution failed
today, one of my server (linux) that execute script workflow show error "Script execution failed" as picture in attached file. I tried to execute many times it still show same error. How can I check? What's wrong? Thank you.
Op Manager - vCeneter discovery
Good day, I seem to be having an issue with Op Manager doing a discovery of my ESX hosts and vm's. I have successfully added the two vcenters but the it never adds any hosts or vm's. I can do a CSV import but I would like to get this working as we will be adding 40+ vm's in the next 3 months and adding them manually is not an option as we want this automated. I have stepped through the instructions that are in the help section but the instructions seem to not work, any assistance would be OpManager
How to setup alerts on ESXi datastore usage?
Hello, I want to monitor my VMWare ESXi 5.5 datastore usage. I can see in OpManager that it can see this data (free space, used, etc) but don't see how to get alerted on it if it drops below a certain threshold. Please advise. Thank you.
Api client installation procedure.
Hi, I want to install the api client but after trying a number of downloads i can not find any exe file to runn for insatallation.can any body guide for this installation. My op manager build is version 11. Regards, Farooq
Best Database Choice
Hi all, I'm new to OpManager and I'm plan to install version 11.0 but I've a question for best deployment. Which database performs better Postgres or SQL Server? My environment consist of near 250 devices. Best regards.
HAProxy not sending syslogs to OpManager
Hi all, We have a HAProxy cluster and I've tried setting this up to send syslogs to OpManager - but no data is being received What do I need to look out for or where do I start to diagnose the issue? Thanks, Frank
Integration with ServiceDesk Plus MSP
Hi all, I have a question regardin OpManager integration (I posted similar question on ServiceDesk forum already and gets some info). When I try to integrate OpManager and my ServiceDesk as you show me above I recieve this message: Unable to fetch values from ServiceDesk Plus running on http://xxx.yyy.zzz:8080 Troubleshoot Check if the ServiceDeskPlus Server is running Check if there is any special character in the values configured in the ServiceDesk Plus (category, groups, techicians, etc). Server
Pass IP address to script monitors
Hi, Is there any way to pass the IP address of a device to a monitoring script instead of the device name? For example, a variable like ${DeviceIP} instead of ${DeviceName}. Thanks, Hamish
Can I create a Notification Profile based on Business Views?
I've spent a long time building business views of the infrastructure and it seems stupid that I can't now build rules based on them.
adding own radio
Hello team, we have radios similar to aruba, microtik etc. i can use that option to monitor our radio. now i want to change name to our radio, so can i use existing files to convert to our radio name?
Need to find tables to report....
Hi. Need to report on the following as a database view for management to ensure that we are monitoring everything. Device name Monitor1 Monitor2 Monitor3 ... Table like this Devicename|Type|MonitorName|IsActiveMonitor(1/0) Trying to find the tables by querying inventory through OpManager with the SQL profiler (our database is in SQL Server) - the query traffic is so swift that I have 100K sql calls to search through in under 60 seconds monitoring. Where should I look? Which
SMS Notifications via Clickatell not working
OpManager Build Number: 11600 Hi, I have configured all my Servers, Routers and Switches with a notification profile. At first I used the email notification by setting it up accordingly.I can receive the notification mail well. But..When trying use Clickatell notification on OpManager, it fails! I can make a successful test via Clickatell sample code. I had follow the steps with the following link. http://www.slideshare.net/opmanagerteam/opmanager-clickatell-integration-for-sms-notification Of course,
Cant monitor free disk space with wmi after installing Microsoft APP-V client
Servers I install Microsoft APP-V client on I am not able to monitor free disk space with wmi. I have taken a clean windows 2003 R2 server discover it with Opmanager and it finds the disks, I Delete the server from Opmanager install Microsft APP-V client an then discover the server agent and it doesn't find any disk with WMI. I am now running Opmanager Build Number: 8024
NetFlow reports
Hey guys I have recently (yesterday) taken the plunge and am still busy falling down the rabbit hole that is OpMan, so please pardon my ignorance. I am having some trouble compiling a NetFlow report on one of our routers. Firstly, I have set up the report to pull both In and Out traffic between the source and destination IP; when the information coalates, only SourceIn traffic is shown, even though there was definitely SourceOut traffic. It shows as "No Data to Display". Secondly, I am trying to
Monitoring addition/removal of users in global sec group
Good day! Just logged a question with you guys and I already have another :) I have been tasked with monitoring our Domain Admins sec group and the setting up an alert when a user is added or removed from the group. I tried setting up an Event Log rule that should fire off when a certain event log appears on our DCs - in this case, the event ID is 4728, which appears in Event Viewer when a user is added to a security-enabled global group. Please see attached snip of the Rule criteria. I've added
Dashboards
How do you reset the default dashboards back to their default views in the new Opmanager FluidUI?
ServiceDesk Plus MSP and OpManager
Hi all, I am new in MSP and I am wondering what is the simplest way to connect or integrate MSP and OpManager? Thanks in advance and best regards
3Com 4200G No Data and value
We have few 3Com device with 4200G, we fail to obtain the CPU, Memory , Temperature & Packet received graph. We have tested the SNMP and it is result successful. How should we rectify this?
How to disable the link , please see the photo ,thanks!
How to disable the link , please see the photo ,thanks!
Please help me configure SNMP Trap with Avaya-G3.mib i manageengine
Hello, Can you help me to configure snmp trap with mib Avaya G3.mib in manageengine. I have no idea. g3lsplistNodeName g3lsplistType g3lsplistID g3lsplistRegistered g3lsplistActive g3lsplistIPAddr1 g3lsplistIPAddr2 g3lsplistIPAddr3 g3lsplistIPAddr4 g3lsplistAvailable g3lsplistXlnUpdated g3lsplistServiceState g3lsplistNetworkRegion No Data No Data No Data No Data No Data No Data No Data No Data No Data
snmp is not recognized
Hi, I have one server with the same config as others, which is not recognized as snmp enabled when discovering in OpManager. SNMP is configured and running on the server, it does report in MibBrowser and SNMPWalk, but OpManager doesn't see SNMP on it and monitors don't return anything. It's a Windows 2003 SP2 and setup is identical to other 12 servers, which are reporting just fine. Any suggestions?
Threshold Rule Violation not working properly
I set up notifications for our servers last weekend, and due to backups, thresholds were being hit and I was being spammed with alerts. So I logged into the system and Unchecked Threshold Rule violation in the notification setup. However I continued to get spammed the whole weekend. In the end I had to set it to only email on Critical alerts to reduce the number of emails, it didn't stop them totally and left us exposed if there were other alerts at trouble or attention. I'm on latest build of OpManager
Unable to start OpManager in CentOS
Hello team. I'm unable to start the OpManager. The error that always occur is - "Permission should be u=rwx (0700)"
OpStor plugin can't start
Hi, We recently bought а supcription on OpManager Essential fnd installed the product. We have SAN HP MSA 2040, so we would like to monitor it. For this reason we installed OpStor plugin. After restart of OpManager we gain.. nothing. OpStor plugin didn't even start with messege " OpStor Server Fault OpStor Server Fault". Please help to resolve this situation.
Request: Too many interfaces!
All my servers have over 2 dozen software interfaces, like "WAN Miniport" or "Packet Scheduler". I don't want to monitor these by default when discovering devices. I would like to create a custom interface template based on the name of the interface. For example, don't monitor any interface name "WAN Miniport". Alternatively, can you add an option to disable monitoring of new discovered interfaces when adding a new device? Then I can manually just enable monitoring of the one or two "real" interfaces.
Editing Thresholds on Virtual Devices
When I added my vCenter all devices came back as Virtual Devices, once I started adding the SNMP and WMI passwords on these devices OpManager changed their category to Windows... Great. However, now I want to do a mass edit on the thresholds for the VIWebServices, I've edited at the original template level fine, but now that all my servers are 'Windows' boxes they are no longer picking up the template. How do I edit the thresholds of all these devices without manually going through a few hundred
Bandwitdth error
Hi, I have problems to generate the graphics for days, for hours if they show well Thanks
Using MSSQL monitoring
I am very new to OpManager. We do have the MSSQL monitoring add-in but I can't seem to get ot to work for all the servers I see. Is there a simple check list I could employ to be able to get MSSQL monitoring funtioning on those servers I'm having difficulty with? I get pretty far into it but when it come to where you select the databases to monitor it's blank.
Availability report - incorrect up time
I have a time window of 6am - 10pm. This equates to 16hr/day 112hrs/week. When I run the availability report for the previous week, the 100% value = 4d 10hr (106 hours). Why is there a 6 hour difference? Why is the value not 112 hrs. Ideally I want to run an availability report for the last month (6am - 10pm, Mon Fri). This does not appear to be possible. Can this be confirmed? Thanks
Used Disk Space in MB for C: is 28 MB, threshold value for this monitor is 2000 MB
Used Disk Space in MB for C: is 28 MB, threshold value for this monitor is 2000 MB Crapy
Adding more than one threshold value
Hi, Can i add more than one value in threshold value when using the equal (=) for example : I need to add value 5 & 6 in Trouble ? and Thanks :)
Remove "Get Quote, Purchase" button and other advertisements
After purchasing a license for OpManager I was expecting the advertisements to go away. How do we remove the "Get Quote | Purchase" button? How do I remove all advertisements for other ManageEngine products? When looking at a network interface in OpManager there is a huge advertisement for NetFlow Traffic Statistics. Clicking the "x" closes the add until the page is reloaded.
QR Code
Hi, Is it possible for the QR Code to hold the IP address of a device rather than it's dns name? Our smartphones will only see them via IP. Hope you can help.
Monitoring seems to be stopped for windows servers (wmi)
Hello, My monitoring stopped working for windows servers In the device summary view I cannot see the perf grpahs (see the attached images). The same device summary was ok till now A line of this sort is appearing in a log file called stderrxxx.txt 07:53:58:113 AM WMIServicesPoller polling still pending for :: xxxxx.10000000001 07:53:58:144 AM WMIServicesPoller polling still pending for :: xxxxx.10000000001 07:53:58:144 AM WMIServicesPoller polling still pending for :: xxxxx.10000000001
Live Graphs not refreshing
all live graphs in Op-manager stop refreshing and getting live data, while everything else is working fine, Please check the following live traffic graphs : . I need your help and thank you . Best regards Alaa
Reset the admin password
hi i forgot the admin password so how can i reset it?
URL Monitoring not working
Hi, We are trying to monitor http://www.netselmarina.com/ on OpManager. Site is up but when i hit test URL it returns "The URL http://www.netselmarina.com is down, Reason : Host Unavailable". I checked wireshark outputs, when i hit the Test URL, i get HTTP 303 first and then HTTP 200. I guess it is because of URL redirection? So how can i monitor this URL now on OpManager? Regards,
Orphaned and Missing VM's OpManager 11600
I'm on the latest OpManager 11600, and vm's are becoming orphaned from the vCenter, and some are missing completely. The missing VM's can be seen in the list of VM's under the vCenter, but they are not being managed, and when I manually add them, they do no pick up any VM settings (essentially orphaned from the vCenter).
Removing Default MSSQL Services from being monitored (11600)
I have an vCenter host that has the MSSQL monitoring applied, however it is not running MS Search or SQL Server Agent services. In the previous version i loaded the old UI and removed services no problem. However in 11600, it defaults to the api view when looking at the device snapshot when using the old UI. I don't have any option to remove the services.
can't upload mib file g3mib
Error occured during the MIB parsing. The error is : ================== G3-AVAYA-MIB ================== CRT-82 All OBJECT IDENTIFIER values should have at least two sub-identifiers. lineNo colNo Error 33 5 Only a single sub-identifier 'com.adventnet.snmp.mibs.mibparser.NameNumber@121f352' is present in the OBJECT IDENTIFIER definition -----------------------------------------------------------
Next Page