Asset Details
Hello, I noticed that with SNMP installed on Windows systems, I can view installed applications and running processes. If SNMP is not installed, these links are not available. Is this by design? Can this info not be gathered with WMI? Regards, James
Lost monitoring of switch ports
I -WAS- using OpManager to gather traffic data for my Dell PowerConnect 5224 switch. I added the device and all was well. I then went into "configure ports" and turned off ports that I did not want to manage. All was fine. I later went into "configure ports" and turned a few ports back on, while still leaving several turned off. Once I did this, the "interfaces" section showed ALL ports, with stats of N/A. Now if I go into "configure ports", the list is EMPTY. I have tried removing and re-adding
What time will upgrade mysql 4.0 to Mysql 4.1 of OPManager
HiHi IPManager use the mysql 4.0!!! Some mysql synax don't support me to direct query data (like sub query) Because I want to analyze some other data! As title Will the next version use > 4.1 (mysql)? pure english !! :P
Switch 3Com 4007
Hi! I would like to manage one Switch with 9 slots of 3Com. This device has a management interface. If i only inform to the OpManager the management IP address and the community, I will only be monitoring the slot of management. To solve this problem is enough to add a new device and only modify the community <community>@slot_1.1, <community>@slot_2.1, and thus for ahead, but as I have 9 slots. I cannot add the same device 9 times with different communities. Is there some another form to manage these
Discovery - Broadcast Address Reporting
Example: A range of 10.1.126.0/255.255.254.0 has been set for discovery. This range of 512 addresses is actually operationally masked as 255.255.255.252. When autodiscovery happens, it is reporting all the broadcast addresses as one of the devices within each /30 subnet. How do you keep the discovery process from falsely reporting these broadcast addresses as a device? There are over 3,000 of these /30 subnets, so loading each subnet individually would be an impossible task AND they need to be grouped
Monitor Linux Processes
I am running a custom program on 20 linux RH 9 machines and I need to monitor the service that this program spawns called IVR. There are no ports that open with this runs. Any idea how I can accomplish this? I would like to use SNMP so i could get performance metrics. Doug
Problem receiving traps (both unsolicited and configured)
Hi all! I am using the Professional Edition of the evaluation version of OpManager 5.5 build 5503. I am having some problems with receiving traps sent to my system. It is probably just some setting I have forgotten to set somewhere, but I have tried everything short of the jedi mind trick to get this to work, so I come to you to set me straight and (hopefully) tell me what I am doing wrong. As I understand it, OpManager listens on port 162 (which can be altered by modifying trapport.conf in the conf
It always uses 'public' to discover SNMP node
I'm using OpManager 5.5. I've changed SNMP Community String to other word than public in SNMP Parameters, but OpManager still discovers the network using public. Thus, I have to change password for each node on the network. :evil:
Issues with and Suggestions for OpManager 5.5
I have noticed several issues with OpManager 5.5, some of which have probably already been noted. Here goes: PROBLEMS 1. After configuring SNMP community, it remains at "public" when adding devices 2. I cannot make WMI monitoring work at all. I remove the SNMP monitors and add the WMI monitors with no problems. The monitors say they are running fine, but no graphs are ever created and the cpu/memory/disk section simply says "no data available. If I remove the WMI monitors, re-add the SNMP monitors
sending sms trough gsm terminal
Hello, I have nokia 30 gsm terminal connected to that computer where are installed opmanager. I would like to send sms if something happens? Is it possbile?
Core Builder 9000
Hi ! I have to administrate a Core Builder 9000 switch(actually it is a 4007 switch, but they are fully compatible) with OPManager. When I typed de IP address of my switch, OPManager sucessfully discovered this core switch (as a 9000), but OPManager only found one module with 3 ports (these ports are on the manager module). I still have 7 more slots on this core switch and each slot has a different switching module. What do I have to do to OPManager discover all of these modules ? Is it possible
OpManager Build 5501 : create trap processor
I would like to create trap processors from unsolicited traps in the web client (we use release 5510). But a javascript error (see attachment) appear on my web browser . Do you have any suggestion or idea ? Thanks
Problem monitoring SQL & Information about OpManager
Hi everyone. First of all, i have a problem monitoring SQL Server 2000 : - The SNMP Service is up and running - I can observe the main informations about my server(CPU, memory etc.) - SQLSERVERAGENT is running too But the graphs that i applied to my MS-SQL server aren't working!. No information is collected. Second thing i would like to know : If i buy OpManager as "Node Locked License Fee for single user edition" is there a restriction about number of servers/desktops/devices monitored ? Thanks
Migrate to another server
Sir, I have installed OpManager in a PIII computer for testing. When this is live run. We plan to buy a server. How can migrate the system to another computer? Samuel.
Installing a network card in Linux
How to install a network card in Linux ES 2.1
Cannot see business views on web client
I create some business views to classify nodes by the services I provide to customers. I can see the node icons in business views on java client, but on web cliens, it only shows the counts without any icons. Is this a bug?
Determing baselines/threshold for Compaq Monitors
We have many Compaq servers in our environment, and we have the Compaq (HP) Insight Manager foundation agents installed on nearly every one of our servers. I want to utilize Compaq Proliant Server monitoris in OpManager, but I'm somewhat floundering as where baseline would be for many of the monitors, which would help me in determining the threshold. Such as Power Capacity, Input Voltage, Server Temperature* .. where are my baselines? I have to enable a threshold in order to enable the monitor. Wish
No CPU utilization% for Win2003 Server
Sir, I have add one Win2003 server for monitor. But there is no CPU utilization% data show. Memory and Disk is ok. Why? How to fix it? Samuel.
Cannot monitor Windows Services
Windows Service Monitoring do not working properly. As soon as I specify domain\username , it changed in a miute to domainusername So my windows service always show down. Any idea on how to fix it
Manage the Desktop computer
Sir, Is it possible to have a option to disable the desktop computer generate alarm message? But the desktops are still in managed/monitor option. Why? Because we want to monitor the desktop are up or turn off. If we know most of the user already left the office. Then we can have some maintenance job. No need to inform the users. Samuel.
Can optutils run as a service now with sp2?
Can we run it as a service now? There was a thread about this back in october wherein it was indicated that with an upcoming SP to the app we could run it as a service. Is that true now?
Oputils E1002
I try to evaluate the software, but... The only thing that I've got is the E1001/E1002 error. DNS is working, everything is pingable, snmpable and so on. For example, a lookup on IP is working, but gives a 1001. A lookup via the DNS name gives a 1002. But only in optutils. Via the command prompt (dos) it does work. Does someone have great idea. The product looks nice, but functional? I don't know. I posted it here since the support@oputils email was unreachable.
No Reports Data from CPU/Memory or Graph Data
I have OpManager installed and working ok mostly but the reports and Graph Data do not seem to be working. For my server it shows the percentage of CPU and Memory usage on the main monitor but if I click under "Other Graphs" and "CPU Utilization" it is blank. Under Reports for CPU and Memory Utilization the part I really want it says "No Data Available" Is there something special I need to configure on my server besides the SNMP Service ? I don't understand why when I click on "Servers by CPU Utilization"
All Devices Report quirk
I just upgraded to OpManager build 5503 and noticed a quirk in the �All Devices Availability Report�. When the report is run, any device with 100% uptime will be listed by name, but any device with less than 100% uptime will be listed by IP address. This is not a big issue. Just wanted to let you know and see if there is an easy fix.
Please check whether the server is running
Guys- I am getting the following message as soon as I try to login as an admin user. "Please check whether the server is running" Here is my configuration: OPManager 5.5 SP3 Windows 2003 Server I am sure that I am using the correct user name, password and port number. I tested the OPManager after installation, but it started after few days. I will appreciate if someone can help me to troublehsoot this problem. Thanks! Tom
Notification Profiles
I am monitoring a few Interbase ports and I want to associate a threshold rule for all the servers this is running on without having to goto each server and do it by hand, any ideas on this? Doug
ManageEngine OpUtils 3.1.0 Service Pack 1 available
Dear All, We are pleased to announce the availability if Service Pack 1 for OpUtils 3.1.0. The following are the enhancements made over the previous release: 1. OpUtils can now be installed and run as a windows service. 2. Operations, such as starting OpUtils, stopping OpUtils, and so on, can be performed from the windows system tray icon 3. Starting the OpUtils server will automatically launch the client in the default browser.The service pack can be downloaded from: http://manageengine.adventnet.com/products/oputils/service-packs.html
net-snmp 5.2.1 problem with host-resources
OpManager can't get CPU and Memory Utilization from net-snmp 5.2.1 on FreeBSD 4.10-RELEASE-p5. With net-snmp 5.0.8 on FreeBSD 4.7-RELEASE it works fine! net-snmp 5.2.1 compiled with host-resources MIB and, for example, SolarWinds CPU Gauge works fine. Help please!!!
No data available
Hi all, I installed Opmanger 5.5 (free edition), and i have added 5 servers into my account at the moment. However, I cannot see the CPU utilization, memory utilization and disk utilization after i clicked into a particular server. All I see is one message --> "Data not available". Anyone know what i should do to get the graphs back? I wonder if i need to make some configurations on SNMP or some other globoal configurations?? I have tried the following, but i am not sure if that is the correct way
MIBs batch processing?
Hey there, Is there anyway to load MIBs in MIBbrowser or OpManager itself using batching method like available in other Monitoring tools? The aim is to have either MIBBrowser and opmanager5.5 coming up with MIBs loaded and not having to create Trap processors manually or load mibs each time MIBbrowser starts. I'm currently evaluating the product and that the only, but painful, argument against it.
JavaService.exe causes CPU usage to stay at 100%
I recently installed the demo version of OpManager 5.5 with the intent of buying it. I have configured several of our servers without any problem, until today. Now, when I exit out of the web client, my CPU usage will go to 100% and stay there. JavaService.exe is shown to be the process which is at fault. Any ideas? This computer is brand new and only has OpManager 5.5 installed on it.
LOTUS NOTES MEMORY UTILIZATION
I monitor one Compaq Server that runs LOTUS Notes and memory utilization% shows 100% at all times. Any suggestions or known issues?
error adding graph for linux server via ssh
When I try to add a graph (i.e. cpu utilization) for a linux server via ssh, I get the following error: SshTools / log4j jar not present in classpath. Please download the sshtools-j2ssh-0.0.4-alpha-bin.tar.gz/zip from url "http://prdownloads.sourceforge.net/sshtools" and set classpath to jaxb, log4j and sshtools jars. The above error doesn't give enough clear details on what needs to be done. I've tried to download the referenced file and extract the 3 jars. The problem comes trying to set the classpath
OpManager 5.5: Fixed 5.0 issues back again
Hi, I've been using OpManager 5.0 (release 5006) successfully for some time and upgraded now to version 5.5 (release 5503). Since the upgrade, some fixed 5.0 issues are back in again and some 5.0 feature have gone: 1) Issue: Authentication failure OpManager 5.5 seem to have default community strings (public) hardcoded somewhere, excactly as in 5.0 (see post http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002634085). However, the patch provided in this post
Buying ManageEngine Opmanager 5.5
Hi I am looking to buy one license of Opmanager 5.5 . I see its $ 795 for 1 user Node-Locked License. I understand what 1 user means, only one user account can be created, but can that user login from anywhere? Also, is it possible for multiple user to login using the same username?
Buy OpManager 5.5
Sir, Can we buy the OpManager 5.5 now? Your online store still show version 5 only. Samuel.
Installtion on win2003
I'm Eval. th e software i recently downloaded from web site. i install it windows 2003 server all things are done in proper manner. but when i try to start the server i just hangs on configuration completed. But no client is working. help.......... Thanx & Regards In Advance.
OPManager Email Notification Setting
I need to enter my authentication setting as domain\username and I can send a test message just fine. When I save the settings and then go back into the mail server settings the \ is now gone and the email notifications fail. Is there a reason why the \ will stay?
Can I monitor Mailsweeper Services
Hi I am trialing opmanager 5.5. Please can you confirm whether its possible to monitor Mailsweeper Services. If so, is it possible to confirm how i can configure. Many thanks
Monitoring memory in megabytes and problem with band usage
I would like to know if is there some way to monitor (or take reports) of the computer's memory use in megabytes and not in %. I also have a problem with my bandwidth usage not showing % of interface utilization. I have the correct kbps (or mpbs) interface traffic, but on all of my devices the interface utilization = 0. What could it be ?
Next Page