notification for printers
I noticed that snmp enabled printers can notice if the toner is low, out of paper, etc. How would I have a notification email sent if it is out of paper or toner?
OpManager Wish list
Hi, I have a couple of Sun machines with many, many partitions that I am finetuning and I have a lot of trouble checking the threshold that I have set every time that I need to make a change (I have to check all partitions and that means a lot of clicks!). May be a good idea is to have a report to show the monitoring configuration (thersholds, polling time, user accounts used to poll, etc.) for each machine and for an individual machine... Regards, Rodrigo.
Windows XP Pro Firewall
I have a number of laptop users who have XP Pro (SP2) installed on their machines. As they are mobile I need to have their Windows Firewall active so that they can use hotspots, etc whilst out of the office. With the firewall on (and set with defaults) OpManager doesn't appear to be able to see them. What port(s) need to be opened in order for OpManager (& other AdventNet software - ServiceDesk) to see these machines? Thanx
Feature Request
Could we set the url warnings to have a dependancy on the web server they are running on? I had to reboot my web server today and got paged because 30 sites were down.
OpManager stops retrieving data
Hi. I have this issue. I have a Sun machine with about 25 partitions that I've being monitoring for several weeks. But with no apparent reason, OpManager stops getting disk utilization information on some partitions and shows NA on graph. If I click on the '30' button to see data for the last 30 days I see data until several days ago and after that, nothing. When trying to readd disk utilization monitor for all partitions I get Unable to configura graph error. Some of the partitions were succesfully
Error on setting up mail server
We are testing Opmanager at an external site and when I want to send a test message to an address outside of that domain, it gives this error: Invalid Addresses; nested exception is: class javax.mail.SendFailedException: 550 5.7.1 Unable to relay for (outside email address) If we use an email address that is inside that domain, it works perfectly.
Could I add a Infrastructure Views item ?
How could I add a Infrastructure View ? Why I add the device always didn't get the repond (http://172.30.0.241/topo/addNode.do) Thanks
Opmanager software for windows NT Operating system
Is there any version of Opmanager which supports Windows NT operating sytem?
Router with ip unnumbered
Hi, I have tried the method that you suggest with the script 'add-interface.sh' but unfortunately, it doesn't work..... I receive this error /AddInterface.sh xxx.xxx.xxx.xxx community 161 1 Exception in thread "main" java.lang.NoClassDefFoundError: com/adventnet/snmp/beans/SnmpTarget at AddInterfaceEntries.main(AddInterfaceEntries.java:25) If I change the device type to 'switch', I can see ALL interfaces ( also loopback, Ethernet which is not active, and so on....) When I come back to 'router', Opmanager
Java client
Sorry to bother you again but i've got another last question about this great product. I want to change the type of monitors using Manage engine in Java (resource monitors, traffic monitors, appilcation monitors, etc.) but i can't get set anything if i am using Java client. am i doing something wrong or isn't it possible to do it in Java client??? Thanks..
acces denied
Hi, i have added a windows 2003 server and i want to monitor disk utilization, free disk space, etc. but i get the message "access denied". My domain, login name and password are good for sure. I am using a WMI based monitor. What is the problem???
ping test
hi is there any way to check the time of the ping also is there any way to change the ping setting ?? thank you guy
Okidata Printers
i have 12 okidata 390 printers on my network this message i keep getting from one of them Varbinds on the alarm any idea what this is ??? Tim
snmptrapd.conf
does anyone know how to setup the snmptrapd.conf file? I would like to monitor hardware on my servers but I don't have anything to go on yet.
disk utilization on snapservers.
Hi, currently we have 3 snapservers which are basically nothing but NAS disk arrays. They run on linux, and I have snmp enabled on them. I notice that the disk utilization on the snapshot of the device will peg out at 100 percent, but if I do a diskspace usage report on them, that the devices still have plenty of diskspace. Does the disk utilization graph on the device snapshot show the access utilization or the size utilization?
How to change port number for opmanager 5.5
What are the port numbers opmanager 5.5 supports.If I want to change the port number what should I do
Security on log on
Ok, I was presenting this to some execs and a question came up on what is stopping someone from brute force attempts into the opmanager login webpage? Is there some security settings which stops a login after a few failed attempts?
Backup Exec services
Hi, I'm new to this toy so please bare with me. In Admin|Services i have added a new entry for Backup Exec Services with the relevant port number. I have created the following Windows Service Monitors using the option of restarting the service: Backup Exec Job Engine Backup Exec Remote Agent for Windows Servers Backup Exec Server Backup Exec Media and Device Service. I have created the Notification Profiles for Email and SMS. Criteria Options i have selected are the Backup Exec services. I have associated
Difficulties with SSH for Resource mon
Hi, Trying out the 30 days free Edition here and all in all it looks EXACTLY what we've been looking for, for our hosting solution. Right now Im running the OpManager on a win 2003 server, trying to set up non-smnp linux devices. Services etc are good, but now we want to check the resources, like memory, cpu and so on. So Ive done usual setup, checked the login prompt, password prompt and also the bash prompt. They're all default when logging on with ssh on that machine. So i checked /var/log/secure
delete network view
I accidently entered in a wrong network device and it created a new view for it. How can I delete an entire network view, but keep the rest!?
Bugs in OM - Monitoring Intervals & Web Interface View
Hi Have found a bug in sp3 onwards (i run 5004)... the new "firewall" and "url" views do not have a global option in either gui or web client to set monitoring interval the gui client lets you right click on the view and choose monitoring interval, but it does not have an option on the next screen. Also, in the web client, when you set your default view on firewalls to be "detail" and then do not have any firewalls that are reporting snmp data to the web client (its weird, the device shows snmp data
Wish List Item - Sort in Web Interface
Hi! I think a great feture would be to be able to sort by any column in ascending/descending order in the infrastructure views in the web client. This can be done in the gui clientbut not web, making it difficult to find a server quickly in a list of 100 in detail view in servers (as an example). It would be great to be able to sort by name, or by service monitor (eg have all IIS servers at the top of the list). Is it possible for this to be added to the roadmap? Thanks Dave
Don't refresh port status
Hi, I'm adding several switches to OpManager 5.5 build 5504 and at the firts time the port status appears correctly, but if I connect or disconnect one switch port the status don't changes never.I test it with web and java client.
exchange
i have a exchange server on the opmanger server and when i want 2 acces the web interface it says that port :80 is already in use.
Monitor Opmanager
Can someone tell me what SNMP port Opmanager opens when it runs? I want to monitor my primary server by a secondary Opmanager just in case I loose the Primary.
incorrectly finding non-snmp node
hey guys - so far, this product looks really good. Im currently still in my first day of eval, but noticed something. I have a subnet segmented for all my cisco switches, routers, etc.. Everyone of them have SNMP configured. When I ran the Network Monitoring/Network Scan, it shows up with a few of the cisco devices as "non-snmp mode". These devices have the snmp settings properly configured, so... Whats the deal?
non existant email support
Hi I have been trying to get support for OpManager for a month with no result. Have sent numerous emails to the support email address, with no response. Is this normal? It seems that everyone was responsive until our money was paid, but now its silence. Perhaps a support team member can look into this for me, and try to find out why nobody is responding? Thanks Dave
opmanager with mysql on different port
Hi Is it possible to run OpManager's mysql on a different port? The server in prod that it is being migrated to already runs mysql for another application.. Thanks
Device already present -- But I can't locate it
I was adding a server in which we were missing reverse DNS entry for. OpManager seemed to "hang" during the process of adding the device, and I couldn't tell if it completed. I had to refresh the page after a period of time, so I never received the confirmation notification that the device was added. Later, this server's NIC cards were "teamed" which brought into use, a new IP for the device. Additionally reverse name records for this new teamed IP were created. Originally I added the device with
Lotus Notes
I have set the port number for the two Lotus Notes Server to 1352 but OpManager is still not showing these servers as down. Is there something I'm missing here.
scripting
Hi, i have a few questions about opmanager 5.5. Is it possible to put in scripts like VBscript and batch files??? And is it possible with this program to look if my backup is successfully completed??? Kind Regards, Basj
Trouble-Ticketing and Asset management for OpManager Users
Hi, A lot of you have asked us for Asset Management, Software license tracking and trouble-ticketing functionality in these forums. Here's good news - We've just released a new Help Desk and Asset Management software - ManageEngine ServiceDesk plus Now you can have OpManager forward critical alarms as email notifications directly to the helpdesk email-ID and they get tracked as tickets in the ServiceDesk. You can also track your hardware / software inventory, manage software licenses and track purchase
Software Inventory
Using OpManager 5.5 is it possible to generate the Software Inventory report like # of Oracle and # of MS Office installed in the organization.
Starting JavaClient in Fedora
In Fedora Core 3 the Server starts without any error. The web browser work perfectly. However, when I try to run ./StartOpManagerClient.sh the following error occurs AFTER I put in my login name (admin) and password: locale init method : en_US LoginScreen Visible locale init method : en_US Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException at javax.swing.plaf.synth.SynthContext.getPainter(Unknown Source) at javax.swing.plaf.synth.SynthPanelUI.update(Unknown Source) at javax.swing.JComponent.paintComponent(Unknown
Avaya IP Office phone system
Hi, Is there a trick to getting Opmanager to see an IP Office phone system ? I have set the IP Office to run SNMP on port 161 with a read key of public, but Opmanager does not see it as running SNMP. Any ideas ? Mark.
Custom Monitor not displaying graph
I'm monitoring a Cisco PIX 525 sucessfully using OpManager. The CPU and Memory monitoring is working a treat (I'm getting graphs). I've added a custom monitor which seems to be working correctly as the threshold I've set is displayed as normal but when I display the graph it just shows NA. The custom monitor I've configured is to monitor the current connections on the PIX. MRTG is able to understand and graph the values so I can only assume I'm doing something wrong! Here's the OID .1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6
OpManager: Managed Fedora Core 3 Server problem
I am running OpManager 5.5 on Window XP. I am having problem to manage Fedora Core 3 Server. The Fedora Server is running Net-SNMP 5.1.2 on it. On the OpManager I have a blue star on the Fedora Server, but I just can't pull any CPU, Memory, Disk Utilization info. I can't get Host resource from MIB Browser, but not all data are aviliable. Also, I have to use SNMPV1 or SNMPV2 to get MIB. If I use SNMPV3 to get MIB, it will fail. Please advise ASAP. Shaun
OpManager: Managed Fedora Core Server
Hi, We are team that implement the OpManager project for our school. However, we facing a problem to manage Fedora Core Server. We have installed the net-SNMP V2c package at the server and the agent is test running well by using the command SNMP-walk. But, when we add the device to the OpManager, it shown as non-SNMP nodes devices. Can anyone help us? This is very urgent case. FYI, we installed the OpManager at Window platform (Win XP prof.). The result from the SNMP-walk is attached in this discussion.
Services Down
i have tried on three difrent computers 2 windows xp and one windows server 2003 EE ever 5 hours or around then all servers show all services as down except exchange most are internal one is external everything else is fine with the monitering to fix the problem i have to restart the service
Software Report
I am able to view the Installed software on the Desktop successfully through OP Manager 5.5. Is it possible for me to export the same to the report....
Next Page