SNMP Trap link up-down auto close
I configure two traps one for Link up and one for Link down. In failure component of Link up I configure link down. First link down trap is generated then link up. Now the link down trap will be removed from active traps?
Latency ping Monitor?
Hello there, Is it possible to use Opmanager to set up an aggressive latency ping to one of our servers so we can constantly ensure that it stays below a certain threshold? Cheers, Ryan
Reducing SNMPGET requests
We have an issue where we see TONS of snmp get requests from our probe. This was originally causing our events log to show thousands of events for interface up/down's each day. Though they were not critical, it made our Ops team numb to any events in the log, so we stopped going through them at all. I know.. Not a best practice!! So.. as I'm trying to tune out the alerts for up/down's on access ports (I think I finally figured that out!), I am seeing snmpget requests several times per minute. Polling
OpManager 12.3 Sorting Not Saving
Since upgrading from 12.2 to 12.3, it appears that devices, interfaces, alarms, etc all sort by Time by default. If I change this to Device Name, it defaults back to Time. When I click on something else and return to the page it is sorted by Time again. Is there a way to save the sorting?
Could I sent an alter for a device that lost 3 snmp response ?
I want to know a device or a service is alive. If we could not get the SNMP response from this server to 3 times. it could send the alter to admin-user
Windows Server 2016 and ManageEngine products
Hello, Our company is preparing a new server for network monitoring and management. Software that are going to be installed on this server are: OpManager (with OpUtils & Netflow analyzer) NCM ServiceDesk Plus Pro I was digging information about these products and found out only ServiceDesk supports Windows Server 2016. Is this true? If it is, when is WS2016 support going to be adder for other products? Cheers! Janne
SQL QUERY ElementAvailabilityDaily
HI, I need made a query to get info for a custom dashboard from the table ElementAvailabilityDaily. I don't know whats is UPTIME, this column is in bigint and i have values like 82800, 86400. My question is, this is minutes, second, days...
Problems with SNMPv2 on a device
I have a device that only has read credentials for SNMPv2. I can connect to the device from SNMPWalk and retrieve results, i can even use the MIB explorer tool in the bin directory and connect successfully, but when i try to run a performance monitor against an OID that I tested in both the MIB explorer and SNMPWalk, i get no value back. I get back a no data received message from the device. If I try using the MIBBrowser from the web GUI I get a message saying "Request failed or timed out. Error
SMS modems in virtualized environments
Hi At the moment we are using OpManager 11600 on a bare metal installation with a serial port attached GSM modem. We are planning on moving and upgrading to OpManager 12300 on a new virtualized server (most likely Hyper-V 2016), and then we will most likely have a problem with the serial port GSM modem and virtualized OpManager server. I was wondering what kind of solutions or products others have used with GSM modems and virtualized installations? Network modem? USB modem? Some kind of COM port
4 Node Hyper-V Cluster Managed by System Center 2012 R2 Discovery
I am setting up OpManager 12.3 and I added a lot of VM's as devices, in other words i added them one at a time and used the DNS Name of the VM to add them to OpManager. Many of these VM's are running on a 4 node Hyper-V Cluster that is managed by System Center 2012 R2. What is the correct way to "discover" these hosts, VM's and the Cluster. I would like to monitor Cluster Shared Volumes I would like OpManager to be aware that the 4 nodes operate in a cluster etc. Also, will I end up with duplicate
Using Managed Service Accounts MSA's for WMI Server Monitoring
I would like to use a managed service account which was introduced in Server 2012 R2 for doing the WMI Scan's of my servers. Is there a way to configure this in OpManager? Currently I enter a credential in Credential Manager, so I'm not sure how I could use an MSA. If I use an account with permissions to scan the servers using WMI to run the Manage Engine OpManager Service would that accomplish the task? I know services in Windows support Managed Service Accounts where the password is automatically
Exchange 2013 Hybrid Configuration Service Monitors
I have added an Exchange 2013 Server that is used in a Hybrid Configuration with the Office 365 cloud. All of our mailboxes are in the cloud, however we retain the hybrid since we are synchronizing our AD to the cloud and need to manage certain properties on prem. It determined that it was an Exchange 2013 server "automatically", and says the "service is down". These are the services that are "down" and I am wondering if they should be running? Also, in services on the server I can see the services
Help with a Powershell script template
I'm attempting to write a powershell script template, but I'm having trouble matching the formatting rules laid out in the manual and the help doc on the page. For instance, I'm writing a simple script that looks at a Hyper-V Hypervisor and retrieves the replication status of all the machines My script is the following: $devicename = $args[0]; get-vm -computername $devicename | where {$_.replicationstate -notmatch "disabled"} | get-vmreplication | select name,replicationhealth This returns a simple
Alerting on Event Logs
Hi all, Is there a way to generate alerts on specific event logs from servers? Basically I would like Opman to generate alerts when event ID 21 or 22 are triggered (WSUS). Also, is there a way to configure it for all servers rather than having to do it for each server individually?
Trial OpUtils
We are currently testing three different rogue detection applications, one of them is OpUtils. I am trying to add a switch with correct IP address and Community String but it keeps reporting 'Undefined' and it the switch is not added. Is this a bug in the current Trial software or am I missing something? Thanks Kevin
Next release of OpManager 12.x
Hi, When planned release next version of OpManager 12.x?
OpManager 12 - vCenter Monitoring - Linux Appliance - "Add Device Failed" error
Hi, I have installed OpManager v12 (downloaded August 10th) onto a VM in our environment for a trial. Straight off the bat, the first thing i wanted to configure was vCenter monitoring. We have 3 environments in this network, PROD (6 ScaleIO Nodes) - DEVTEST (8 ScaleIO Nodes) - DR (4 ScaleIO Nodes). They are all running ESX 6.0 and are all managed by VMWare vCenter appliances (Linux Based). When i attempt to add the PROD vCenter to the OpManager installation, it just errors out. They are on
BW usage report with Opmanager 12.3
Hi With the new 12.3 version there is another issue with reports of Opmanager We tried to export a bandwith usage report for one interface. If I use Chrome, there is no PDF file generated If I use Firefox then one file with 0 KB is generated. file name is : exportinfBWreport witjput any extension We need some help in this matter
At a glance Report in Opmanager 12.0
In previous versions of Opmanager we can export the At A Glance reports to PDF and even schedule this report. With version 12 we cannot find the way to schedule the At a Glance reports, and we cannot even export to PDF. Can someone advice us on how we can resolve this issue?
Monitor CPU core in SUSE Linux
Can OpManager monitor SUSE linux 11 CPU core in HP server?Currently i can monitor CPU only.
Standalone ESXi\Hyper-V and OpManager 12.3
Hi All! I need monitoring VMs in standalone ESXi\Hyper-V hosts - how to ??
Missing Message text
When i get the email from the opManager it doenst give me any info just the Variables Title $message $stringseverity Message This Server is low on RAM or HDD Space Device: $displayName Category: $category Error Condition: $stringseverity Generated at: $strModTime Device Type: $DeviceField(type) Disk in GB: $DeviceField(hardDiskSize) RAM in MB: $DeviceField(ramSize) IP Address: $IntfField(ipAddress) Alarm Details Message $message Device Name $displayName Category $Category Error Condition Attention
OpManager Web Login
Hi all, When i try to login to the web portal of OpManager at the IP: 10.10.1.10:8181 it keeps loading and then failing in the end, however login from localhost on the that machine works fine. what could be the issue. Thanks
How can I upgrade OpManager from version 11500 to 12200 ?
Hi Support, We plan to upgrade OpManager from version 11500 to 12200. May I know any upgrade path for this task? BTW , is there any guide for upgrade procedure or best practice? Please kindly advise. Thanks Kidd
Customizing Widget size
I'm not sure if this is a familiar problem but is it possible to size Widgets the way i like in the dashboard? I went to customize widget, but there was no setting to size the image. thanks
oid value dec to hex and next to floating point number 32 bit
is possible make this in opmanager, i have a OID with the next value 1085738763, i need convert to HEX and next make this.
Opmanager Exhnage 2010
Hello, when i try to add performance monitor ..i dont have option for Exchange monitor...but i have option for Lotus Monitor. What can i do to add MS Exhange Monitor THANKS!
Any URL Down Trigger for Workflow not working
Build: 12200 Have URL Monitor on for specific URL (See screenshot 1), manually triggered by stopping the service on the host to put the URL in a down state. Have a workflow attached to the device that checks the URL and if it's down restarts the service and is supposed to send an e-mail. The trigger for this workflow is "when any URL Monitor is down" (See Screenshot 2-4) If this is configuration issue please let me know, if it's truly not working can I get an ETA on when this might be fixed. Thanks!
Opmanager service stops running
We have 2 Opmanager servers running in failover with another server hosting the SQL database. Since last night, the manageengine service starts and directly stops on the opmanager server. On the other opmanager server, the service starts but stops working after a couple of minutes. The windows event log doesn't show any errors at all. How is it possible that the service stops working overnight?
Unable to add VCenter
Hi, I am trying to add the VCenter with SSO Credential in Opmanager v12 and I am having an issue that shows "Add Device Failed". Any Suggestion? I tried with Domain admin and also SSO (administrator@vsphere.local) but still got no luck. Thanks
Missing Operators for Thresholds on SNMP Monitor
Hi Community, This is probably something simple, but has me stumped right now. I just added a new SNMP monitor for our Blue Coats (.1.3.6.1.4.1.3417.2.11.3.1.3.5.0). For those familiar with Blue Coats, this returns the value of "Server Workers currently active" and it's working great and generating graphs: The problem is that I cannot set up proper alerting as there are none of the normal condition operators for the thresholds as below. In particular I am looking for the >, < and <=. They are there
Is there a replacement for OpStor Storage Manager in OpManager
I was wondering if i can monitor and manage storages like IBM V9000 in OpManager? you use to have OpStor Product and now you dont support it anymore, can OpManager do the management of Storage Regards serak/
OpManager 12.1 Enterprise - Vcenter auto discovery not discovering all of my VMs
I'm having an issue with VCenter auto discovery not discovering all of my VMs. My Vcenter server in OpManager shows I have 142 VMs VM auto-discovery is only finding part of those - this install 76, the last install 38, and the first time I installed it - 52 (these numbers are including my 15 ESX hosts). I called support about the issue yesterday and they wanted me to completely uninstall Central and the probe. Then reinstall both, apply the license, add credentials, then rediscover VCenter. If
Event Monitor OpManager 12200
We have an Event log Monitor that monitors a specific Event Log for a Specific Event and then alerts and sends out notifications. We had an issue yesterday where the event was created but OpManager did not pick up the alert. Even after recreating the event via powershell, OpManager did not pick it up. I fixed it by rebooting the OpManager server but i am curious if there is anyway, without Event log Analyser, to actually see the event log from within OpManager and see exactly what OpManager is monitoring..
WLC Access Point Names
Good day, I've added our WLC to OpManager but instead of showing the AP names, it just shows the MAC addresses. How Can I fix this?
Error MIB file
hi all, i need upload mib file to opmanager but when i was running on mib browser there is error is there someone to help me ? thanks Error parsing MIB:TKD-MIB-SF-SMSGW.MIB Exception while loading MIB:Could not parse the file /opt/ManageEngine/OpManager/mibs/TKD-MIB-SF-SMSGW.MIB. Couldn't resolve these MibNodes : { tableIndex }
Netflow analyzer receive muiltple port whileMonitoring Huawei CE6851-2C(DataCenter switch )
Hi all i was trying to Monitor My Huawei CE6851-2C switch on netflow analyzer, when i issued following commands on my switch , OpManager receive more than 10 interface , and i can figure out which on is the port i want , and i was wonder i just only enabled netstream function on one interface, why OpManager display these interface . <xxxxxx>dis netstream all netstream aggregation ip protocol-port enable export version 9 netstream export ip source 192.168.1.1 netstream export ip host 192.168.1.2
How to correct MIB/OID in Op Manager
I need to correct the OID on these items on my servers, I found the OID on the linux machines are different from the ones on op manager. Kindly assist me on this matter.
V12.1 rediscovery is faulty
Hello For example i have discovered device MYCISCOSWITCH then it names the interfaces based on their description as you can see below in the picture Lets say I change the description of GigabitEthernet2/2 from TRUNK to ACCESS and then rediscover the device by using the tool you have integrated(see the picture below) then it remains GigabitEthernet2/2-TRUNK, but it should change to GigabitEthernet2/2-ACCESS The only chance to make this change work is delete this device and then discover it again.
Unable to log ticket to SD Plus
Running Latest version of OpManager 12.2 and SD Plus 9232 and seem to have an issue logging tickets. Every time I configure a notification to log a ticket, when I reach the step to name the profile I receive the following error: This API is used by OpManager for its internal operation, and you cannot access it. I configured the technician key, server, port, and credentials. Not sure why I can't get this to work. This used to work in all previous version for me.
Next Page