Global Credentials
Hello, It would be nice to have a "Global Credentials" feature in OpManager like in PatchQuest It would be easier to add a host without having to type the username/password every time (WMI, ...) It would be also very nice if we can add login credentials in the "Add Device" page Best Regards
Device says added successfully, but cannot find device
I had a configured device (router) that I deleted at one point and am now trying to add back to be monitored. I add the device via IP and OpManager indicates the device was added successfully; however I cannot locate the device anywhere within Opmanager and when I search for the IP it indicates device does not exist. Is there a problem if a device did exist, was deleted, and one tries to add again? I am on build 6000.
mysql hangs - slow performance
Hello, I am very impressed with your product so far. For the past few days, we have been having an issue with mysql. Every few hours, mysql hangs for a few minutes causing the web page to be inaccessible during this time. We are running OpManager on dual Xeon 2.4 GHz CPUs that show up as four processors in task manager. During this period of slow behavior, mysqld-nt.exe peaks out at 25% of CPU, but network utilization is very low. It seems like mysql is not being load balanced properly across the
Applications manager 6 and Red Hat Enterprise 4
Hi, I've installed Application Manager 6, the freeware one, on a Red Hat Enterprise 4 system. The installation has gone successfully, but when I try to start the Application Manager the process blocks during a step and nothing starts. Here is what appears on my screen where I call the ./startApplicationsManager.sh: --------------------------------------------------------------------------------------- Checking for the availablity of the Primary Server in the Database. Found an entry. Trying to connect
Event Log Rules
Hi, I have the Event Log Rules missing under in Admin tab-> Monitors. What needs to be done to enable it. Thanks, Ramzi
Error parsing MIB:SVCEXT-MIB
While trying to load a MIB from our Cisco Content Services Switch 11503, I get this error: Error parsing MIB:SVCEXT-MIB ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Attached is the MIB that I obtained from the switch. Please help. Thanks. Ismael
Cannot manage WinNT
Please help me managing WinNT OS. The OpManager was installed on our Win2k3 server. I can easily add devices but I cannot manage all devices with WinNT OS. Even the SNMP and Trap were already configured and started. But there is no problem managing WinXP, Win2k, and Win2k3 servers. Except to my one Win2k3 server (an antivirus server using Apache2 services) that looses network connectivity (Network hardware failure) after a few hours and need to stop SNMP (with 100% cpu utilization), Disable Network
Exchange Dashboard Not Displayed
Hi, I followed the instructions in the user guide for Opmanager build6005. Although, the dashboard is not displayed in the trial version (it says the add-on is included?). I'm running Win2k3 Thanks
active sessions for a Citrix farm
Hello everybody, I am testing OpManager free version in the frame of my training period... We have several Citrix farms. For 1 server, no problem for making a custom oid to retrieve the active sessions. But we would like to add each active sessions of each server in order to obtain the total active sessions of the Citrix farm... Is there a easy way to do that? I read the topics but did not find a solution... Thanks so much
Business Views Questions
I have two Business View questions: 1. I was searching the forums about business views and noticed that you have a product called "Application Manager" which is like OpManager on how it looks and was designed. I found the link (listed below) in which you added 'Google Maps' to the business views..! This is really cool and I would like to do it in OpManager. Is this possible? I would assume so since the two products are very close to each other. forums.adventnet.com/viewtopic.php?t=8563 2. Do you
backup on another machine
hello i want to take backup on other machine .how i can do so.
CyberGuard 300
hi guys! I'm using a CyberGuard 300 ( router/firewall/vpn). Just want to ask if anyone of you have an experience integrating this appliance to OpManager? Cherrsss!!! mike
status message help
The following message appears, and we see no data for the server. Active Directory Monitoring Add On Feature is not licensed. This server is a DC, but I do not want DC info, just want to see the resources, i.e. memory, harddrive useage, and traffic. How do I cause the status window for servers, to show me this information again. Thanks
No interface utilization Details display
Sir, I need to monitor the serial interface in a cisco 3700 router. I can see the interface traffic. But no interface utilization Details display. Why? Sam.
Loading mibs in a certain order
My understanding is that all mibs under the mibs folder will be loaded on startup correct? After watching OpManager boot several times I have to problems/questions. 1. Is there a place to see what mibs are already loaded in memory at bootup? I have check using MibBrowser.sh and it only shows the RFC 1213 mib loaded until I tell it to load all mibs. 2. When OpManager boots it does not load all the mibs. I find I have to go into MibBrowser.sh and tell it to load the mibs 3 or 4 times to load them all
How does Opmanager DB link together?
Hi, I am looking to pull some tables from the Opmanager db now I can see it in MSSQL studio. Is there a database structure diagram so i can find the relevant information and how it links together. Andrew Abtec
Problem with DB configuration
I am having problems with the DB migration. It comes up with the message "connection error, please verify the details" . However, if i change either the password or username i have provided the message returned is "login or username incorrect". If I change the host or port details the message returned is "host or port name incorrect". Which password do I need to provide in the opmanager DB configuration. Any help much appreciated! Thanks Andrew Abtec Network Systems
Alarm Escalation Email Addresses
I am starting to configure our Alarm Escalation rules. Is there a way to specify multiple email receipients on the 'To Email Address:' line? I have tried using a semicolon but that resulted in the following error in the notificationLogs.txt which I have attached.
Domain Controller Alerts don't work
Hi, I'm testing OpManager, and so far it looks very promising, except for the fact that I have a domain controller (Windows 2003) added as device, but when I configure a threshold, the alarm for that threshold is never activated. I added all the monitors under Active Directory Services (which include Memory Utilization). Then I go to System Monitors and set a threshold for Memory Utilization). When this threshold is exceeded, no alarm ever gets activated. If I do the same for just a "server" then
Cisco Router and PIX monitoring don't work
helo, I'm trying opmanager for view online status for cisco 2800 and pix 515e. where I can find simple configuration for cisco? I tried set some snmp-server commands, but it didn't work. server with opmanager and both cisco are in the same subnet.
disable the monitoring with floppy
Dear all, Anyone know how to disable the monitoring with floppy when using the OpManager? Thanks a lot, Pete Fong
Opmanager MSP and Report Scheduler
Hi, I tested Opmanager (it's OK !) and now my company bought the MSP Edition. I can't find the Report Scheduler anymore. Am I overlooking this option, I can't imagine it has been removed. Thanks Ari van Asseldonk
Transforming to an MSP 101
Sean Teague, President of Kent Network Solutions, Inc. Dallas made this excellent presentation on the MSP Alliance European Conference at London. It was such a wonderful and knowledgeable presentation that i went to him and requested that i wanted a copy of that presentation so that i can share with the current users of OpManager MSP platform. [Thanks Sean for all your help] What is this presentation all about? A lot of the current customers for OpManager MSP Platform are IT consultants or VARs or
E-mail notification about Due by date
How to modify e-mail notification about Due by date what's accepted by my superior...?, in Notification Rules I cannot find its topic about that. Thank's
Feature Request - Reports - Domain Controllers
Would like to be able to run these reports: - Inventory by Business View This report should include any routers, switches, servers *including domain controllers. With Sub-headings for each category type. - Would like reports to include selectable custom fields. For example one of the custom-fields I've added is "Server Role", I would like reports to include that, and perhaps our propertyID tag etc., - Server Inventory Reports currently do not include Domain Controllers, and there is no built-in report
Network and Performance Counters for Domain Controller
I've just installed the free version of OpManager. I've added a domain controller, and get statistics for cpu, memory, disk, lsass, ntfrs, and ad store, but network and performance counters only ever display "N/A" (been running for a couple of hours now). When testing, for example, the Kerberos Authentications monitor, I get this: Test results The Monitor did not respond to the test request Summary Device Name **edited this bit - windows 2003 dc** Monitor Name KerberosAuthentications Protocol WMI
Dell PowerConnet 6024
Hello, new to OpManager, loving it so far, however I dont think I yet grasp using vendor specific mibs. I want to monitor about 10 Dell 6024 PowerConnect Switches, I went to dells website and downloaded the mib files for the 6024. Inside the zip file I downloaded there are 73.mib files. I put them into the mib directory, but what do I do next to allow opmanager to view specifics on the device? Regards
Monitoring routers with interfaces ip unnumbered
I have some routers and the discovery process didn't find routers interfaces without IP number. I use the interfaces with "ip unnumbered".
Wrong Icons Displayed for Domain Controllers
Greetings, I have seven DC's in the Domain Controller Infrastructure View. Of those seven DC's, only two are displayed with the DC icon. The other five show up as Win2K servers. If I go into the Snapshot screen for each one, they are identified as DC's. What can I do to get them to use the correct icon on the various views?
Managing Laptops
This is an issue on our network as we have approx 30 laptops that come on and off the network regularly. By default we get errors on both the laptop and the switch whenever one leaves the network, I can set everything to unmanaged but feel that these could be handled better if - You could group them separately from desktops to be able to manage large numbers of them and be able to lable them as a Windows XP Laptop, not just either. - Be able to disable alarms as you can notifications and ideally
Login account for Service Desk Integration
I am trying to evaluate these two products and have integration working fine with the default administrator account for SDP. However we only have two techs and want to use them for SDP but I get Unable to fetch values from ServiceDesk Plus, The server might not be running or the network traffic may be too high. I have Active Directory authentication enabled in SDP and most likely need to include a domain in the login, but DOMAIN\USER is not working, can anyone tell me what i'm doing wrong here?
Trap with severity 5 - CLEAR doesn't work
Hi, I have created two Trap Processors using Custom Trap Processor. Here there are: <PARSER textDefn="Trap received from $SourceMO(sysName) with SNMP Varbinds $*" helpDefn="" type="0" nodeDefn="$Source" sourceDefn="$Source" networkDefn="" GT="6" ST="1" enable="true" domainDefn="" categoryDefn="$SourceMO(category)" groupDefn="" entityDefn="$Source_ggsnTrapNew_v1 _trap" nodes="" severity="1" enterprise=".1.3.6.1.4.1.10923.1.1.2" groups="" name="ggsnTrapNew_v1"/> <PARSER textDefn="Trap received from
Resource Monitors
Since applying the new hotfix apart from the default resource monitors i.e. CPU, Disk & Memory utilisation if you click on them to show the graph you now get a Status message which says data is yet to be collected for this device. I have tested the monitors and they work in fact the alerts that we have setup on the partition utilisation monitors appear to be working but the graphs don't. The reports for volume usage also work. David
OpUtils tools in Opmanager?
Are there any plans to add the tools that are available in OpUtils to the OpManager software? I would think that since OpManager is OpUtils with Server management you would be able to use such tools. I was going to buy OpUtils but I also needed to monitor servers as well so I bought OpManager. I notice going thought the OpUtils demo that there are many many network tools and features that are badly needed in OpManager in order to manager a network but they are not included. When will OpUtils feature
Monitoring Multiple CPU's
Can OpManager monitor each processor running on a multi-processor server? I assume in order to do this is it a custom monitor right? I have a Dell 2850 I need to monitor each processor on.
Printer warning send email
Hi, I've just started comfiguring our OpManager so fogive me if this is a naive question. When I bring up the printers I can see that one of them needs a new drum kit. How can I configure OpManger to send me an email to tell me about these warnings? Thank you!
OpManager Support fot HP Procurve 5308 with E10.23 s/w
I'm running v6 OpManager which supports one of two HP 5308s switches though they both run v10.23 s/w. OpManager however reports v10.04. Is there anything I need to do to get it to report v10.23? Also, for some strange reason the second switch cannot be monitored in real-time to show CPU and memory utilisation. Have I missed anything? I'd appreciate any suggestions. Many Thanks Lee
what the step install MIBS
HI, WHAT THE PROCESS TO INSTALL NEW MIBS FILE KINDLY SEND STEPS John Peter
Notification profile
How can I set up a notification profile to send alerts to more than one e-mail ? Thanks.
Mass Remove Notification Profiles
I know you can mass associate, but how do you mass remove a notification profile - or for that matter...mass remove a monitor...etc.
Next Page