Switch Port Mapper to High Latency Site
I am running switch port mapper from the US to Singapore. The process eventually disconnects despite having the correct SNMP and IP information. I imagine it's the latency between the two sites that is causing the issue, as it is 250 milliseconds. Any tweaks or tuning that can be done?
unable to detect that the machine was SNMP enabled.
Dear, Good day! I was wondering why OpManager doesn't seem to identify some of our servers correctly. as i tried to delete, re-discover the device, re-discover the network for the OpManager to be able to detect the device as SNMP enable but i have no luck. still, it discovered as desktop. huuh!! our OpManager version is V6.0 build #6003 although, i can get the disk, memory, cpu utilization of those servers by using the WMI, but my boss wanted to monitor it using SNMP protocol as our standard. plus
Timezone
Hi there, I am facing problems with timezone regarding my installation of OPMANAGER. Does anyone knows a workaround for this problem ? My OPMANAGER is running as a service in a Windows 2003 Server.
Traffic Monitor - Interface problem
Hi, I would like to monitor the interfaces on Windows Server 2003. In the device, the nic is correcly discovered but all counters are marked NA. The interface index is 65539 and 65540 (Dell PowerEdge server with Broadcom). The interface 65540 is not connected and not visible when I click on rediscovery, but I have receive an alert for link down on it!!!! When I add a Traffix Monitor for the "Interface Rx Utilization - Broadcom NetXtreme Gigabit Ethernet #2" (Interface 65539) and I click on it for
Getting Serial number of Servers
Hi, Is it possible to get the Serial number of servers automatically from opManager tool. Thanks
Can't Uninstall trial version
Hi, I downloaded the trial version of your Wifimanager and it will not uninstall no matter what I try. It doesn't show any more in the add/remove programs, but it keeps freezing my machine and won't uninstall. Thanks
Cisco Catalyst 3548XL
Good day. I am looking to monitor the Backplane on a Cisco Catalyst 3548XL. The current OID is .1.3.6.1.4.1.9.5.1.1.8.0. When browsing the devise SNMP MIB I get the following: enterprises.9.3.......... enterprises.9.9.......... but no 9.5................. for BackplaneUtilization Any ideas on how to monitor the backplane on this device? Your support is greatly appreciated.
Automatic Monitor Addition.
It would be nice if devices would automatically add alarms if so instructed when new devices are added. For example, servers with DAS (direct-attach storage). Its hard to remember to add an additional monitor everytime you add a drive - especially if it is a 24/7 operation where work must be done at off-peak hours. David.
Multiple Alarms for Same Monitor.
It would be nice if we were able to establish multiple alarms for the same monitor. For example, if I have a 300 GB drive I'd like to receive an email say every 50 GB it goes down. But then when it reaches 25 GB I want a text message - b/c I wouldn't normally let it get down that far. Right now it seems the only thing one can do is reset this manually at each step, which is a lot of work. David.
All Servers Availability Report
All Servers Availability Report - Today (Wed, 25 Oct 2006) - Time Window - 8:00 AM - 8:00 PM is there a way to change the time that tthis is between we are looking at 8 am till 6 pm Aaron
Custom WMI
Hi, is it possible to add custom WMI monitor or I can only add custom SNMP monitor ? Steve
OpManager MySQL monitoring with Advent MYSQL Agent
Hi I am tring to get the AdventNet Micro Agent mySql agent running any monitoring the OpManager MYSQL database. Are there any special configurations that i need to do? I am running OpManager 6010 and Micro Agent for MySQL 1.0.5 when started the agent says the database is down and then shutdowns the OpManager MYSQL DB brian
instant sms toolkit
Is a serial connected gsm modem or telephone the only supported way if you want the sms functionality in op manager? I have tried with a sonyericsson w800 via usb, but op manager says that the modem is not connected properly. check your settings. Regards Stefan
More options for user priveleges
When logged on as admin. In the users section. Is it possible to add more restriction, rather than just read only? Could this be added as a feature. We want to add access to some of our users but not let them see certain parts of the application. Thanks Andrew
question about compaq temperature monitoring
Hi all, I have setup temperature monitoring for Hp/compaq servers. All works fine, but when I check the graphs I receive 7 different graphs with the names 0.1 degree celsius 0.2 degree celsius until 0.7 degree celsius. What do all these graphs mean? Does the server have 7 different temperature censors? If so, it is impossible to see which censor is used for what purpose. Anybody knows? Thanks in advance
Monitoring VPNs using the MSP version
Hi I'm trialling the MSP version of the software (which is going well) but have a questions regarding the monitoring of VPNs. We have a number of customer sites and I have installed a probes at these sites. Even though we have VPNs to the sites, I have set up the central server and probes to communicate over the internet - I've done this so that if the VPN is down, the probe can still communicate. What I'd then like to do is monitor the status of the VPNs from the central server (I have installed
Memory Utilization For Linux Servers
I'm using free version of OPmanager6 on windows2k to monitor RehatAS servers. For memeory utilization, opmanager is monitoring RAM only not including swap space. I'm using telnet/SSH based monitoring. How include the RAM+Swap space in memeroy utilization statistics. Regards, Raj.
Scale on SNMP graphs do not seem to be correct
Using the newest release of OpManager it appears that the scale on the snmp graphs seems to be incorrect. I believe the rise and falls of the graph are correct, however, the scale on the Y axis is incorrect. For example, on a link that hosts over 30 computers it is telling me the highest traffic level has been 200 K. This seems hard to believe. I am getting the same thing for the traffic reports on my windows servers.
Trying to Monitor asmx urls
I cant seem to monitor a Microsoft Team Server - URLS /....asmx how come?? says can not find host, but when im on the monitoring server i can access it via IE.
Windows Service Monitors not available under RHEL4
We've just gone from testing to production with OpManager. Our test installation ran from a Windows XP box and we had no real issues. The production system is running of RedHat Enterprise Linux 4 and I've found that Windows Service Monitors and Event Log Monitors are not available. They are not even present on the ADMIN page as options. Does the Linux edition not have the ability to monitor Windows services, or am I missing a dependency somewhere?
AD plugin not licensed
Hi, I have this issue. I haven't purchase license for AD plugin. When OpManager rediscovers my DCs it moves them to Domain Controllers container. This is annoying as I have to move it back to Servers container. Furthermore, when the DC is moved all history information for that server is deleted. Is there anyway to avoid this behavior? Thanks, Rodrigo.
Lotus notes monitoring - OPManager * Application Monitoring
I am looking for a Lotus Notes monitoring software. In the following <URL>, we can find a Lotus Notes monitoring reference < http://manageengine.adventnet.com/products/opmanager/application-monitoring.html > Questions : 1) The above OPManager web-page reports that supports monitoring the following applications : MS Exchange, Oracle, Lotus Notes, etc... In the Online Demo I couldn�t find any reference about these monitors. Aren�t they embeded on OPManager ? 2) Where can I get more informations about
Disk Monitor SNMP or WMI
I would like to be able to define a monitor with proper thresholds in the admin section and apply that to all servers. The problem I have is I setup a threshold but the A drive and CDrom drive keep reporting 0mb free and kicking off an alert. Is there a way to exclude these devices on a global level or do I have to setup a resource monitor on each server individually. Your help is appreciated. -Tony
Custom monitir problem
Hello! I'm trying to create a custom monitor for my cisco router. I've created the custom monitor with OID 1.3.6.1.4.1.9.9.42.1.2.10.1.1.1 and attached it to my device. But it doesn't work. If I try to test monitor I receive the following explanation: The Monitor did not respond to the test request Protocol SNMP OID 1.3.6.1.4.1.9.9.42.1.2.10.1.1.1.0 What's wrong with it and where on Earth did it get .0 at the end? Also I would like to gather data from some external script. Is it possible or will
Problem adding interface to a device
Hi, When I go to a server device and I click on rediscovery button from interface, the interface is detected. I check the box for the interface and I click on the add button and I receive a messager for successully added the interface to the device and the page is refresh and the interface is not displayed. The server is a Windows 2003. When I choose a server in the Domain Controller with the AD monitor, I can't discover and add interface. What is wrong ? Thanks, Steve
Monitoring MySQL
Anyone have a .mib file i can load for use in the mib browser?
F5 Big-IP Products
Any possibility of supporting the F5 Big-IP load balancing products? They use wierd SNMP stuff, OIDs like .1.3.6.1.4.1.3375.2.2.10.2.3.1.1 which include 3375 (I think SNMP only usually allows single byte, and this would be an integer). I have tried adding this to OpManager but it always fails. I can get some basic snmp info from the device, but 99% of its stuff can't be accessed due the way F5 has implemented snmp. It actually appears that they prefer getting snmp type values from HTTP instead of
problem in monitoring checpoint (update)
using chkpnt.mib (that i got from http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002636073)in mib browser i can get information from checkpoint firewall-1 NG AI R55 but it s not work when i added device (star not appear) At this added device i cant get any information then i try to add checkpoint firewall-1 NG. it s surprisely work !! Is this problem because of version of checkpoint firewall or else? how to fix this problem ? please help
Google Maps in Non-MSP versions?
When will Google maps be added to the non-MSP versions of OpManager?
Start-up and firebird problems
I have 2 separate problems. First, and this has been true since the previous version of NetOps, after running for some time, the FireBird server unexpectedly crashes. I am now running the latest NetOps and have applied the latest patch, and I'm running this on a Windows XP machine that is patched as well. Second, after one of these FireBird crashes occurred, my NetOps now takes up to 10 minutes to load. Once it is up it runs fine, but it takes so long I originally thought it was frozen. The point
Does it scale?
As a consultant, I'm considering OpManager for a company with 300 intel servers, 1,000 WAN links, 3 EMC, MS SQL servers, Citrix servers, Cisco routers, Cisco and 3Com switches. Does it scale to such environment? Or should I look for solutions from HP, IBM, CA etc?
Network Discovery Question (Opmgr MSP)
I added network 10.128.128.0/20 to be auto-discovered. It did discover the network devices just fine. However, it also added many unmanaged /24 subnets that fall with the larger /20 network range that was specified (see below). Is this normal behavior? I'm not sure why I would need the smaller network? Can I delete them or should I just ignore? 10.128.128.0 255.255.240.0 managed <-- this is the /20 I added 10.128.134.0 255.255.255.0 unmanaged <-- OpManager added all the /24's 10.128.135.0 255.255.255.0
BUG: Business views
Since the new release my Business views that have shortcut links to other business views do not show the correct info in the balloon over. Example.. I have a map of the state of New York and each of the large cities has a shortcut circle to that city. WHen you mouse over the city it does not get you the info for the shortcut, instead you get Webclient.map.baloon.viewdetails at the top. I have attached a screenshot.
Opmanager in a Mac OS X system
Am interested in hearing from Mac OS systems using AdventNet products.
Internal Server Error
We get a problem at the below error. Anyone can help me? Thanks a lot Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, admin@india.adventnet.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. --------------------------------------------------------------------------------
alert.filters
I have made some new alerts-and they are running fine-modifying my DataManagement.xml to not compile stats so frequently...i also ran accross alerts.filters -which only has the original 'Play Sound" alert in it -does this file not get updated untill a proper shutdown/restart? -i could have sworn i've restarted opmanager since then-however not 'smooth' shutdowns of the service-just box reboots....yet my alerts still work so is the alert data stored elseware now?
Monitor Directory / Share
Is it possible to monitor the size of directories or shares at a partition of a server (compaq)?
Notification
Hi I have set up OpManager and set up to notify me when there a system down. I checked my Mail server settings and both of mail address works well when I have it run it as a test. When a system is down I am not getting any email at all or any notification. I am seeing on the OPmanager that it has an alarm but no email. I recreated all the setting twice still same.
How to customize default display(CPU%,mem%,disk%)to be other
i want to customize display to show information from custom monitor How to do it ? Please help
Nee help prefered in german
I have installed the OPManager on my Root server and agree if I liked to begin him the following announcement: :/opt/AdventNet/ME/OpManager/bin # ./StartOpManagerServer.sh inside addon check Unable to start Mysql daemon Unable to create database Exiting OpManager I thank for help. ------------------------------------ Ich habe auf meinem Root-Server den OPManager installiert und bekomme, wenn ich ihn starten m�chte folgende Meldung: :/opt/AdventNet/ME/OpManager/bin # ./StartOpManagerServer.sh inside
Next Page