Display all interfaces on page
Is there a way I can click on my routers page and view graphs for all interfaces instead of the number. Or could i also create a custom page with just graphs. Something like an interface summary
Cannot Restart the Probe
When i want to restart the Probe it generates the following events in the windows eventlog: Event Type: Error Event Source: Apache Service Event Category: None Event ID: 3299 Date: 12.09.2007 Time: 14:51:34 User: N/A Computer: Description: The Apache service named reported the following error: >>> Can't find the workers file specified . Event Type: Error Event Source: Apache Service Event Category: None Event ID: 3299 Date: 12.09.2007 Time: 14:51:34 User: N/A Computer: Description: The Apache service
OpManager 6 > 7 upgrade
Hi, I'm sure you're getting bugged about this all the time now, but is the OpManager upgrade patch from 6 to 7, still due for August 20? Thanks
monitoring logins
Hi, I'm wondering is there a way to monitor fail rdp, or ftp logins attempts using opmanager or other AdvantNet products ?
DiskSpace using SNMP API
Hi, I have started using Java SNMP API recently. I m struggling getting the disk usage and virtual memory. Probably I am not able to get the correct OID for that. Any support will be highly appreciated. Thanks in advance. Indrajoy
Traps with OID untraslated
Hi. I'm getting traps from routers and switches like this: Interface down : ifIndex: 3, ifDescr: FastEthernet0/1/0, ifType: 6, .1.3.6.1.4.1.9.2.2.1.1.20.3: down I have loaded the corresponding MIB (OLD-CISCO-INTERFACES-MIB), and when i get this value from the mib browser, it is translated correctly. I don't want to see the OID in the alarm (i need readable text). There is any solution? Regards, Andres
Linking Devices using more than one interface
We have several devices which have more that one interface linked to a switch. We want to view this in a business view but when we try a message state that we have already linked these devices. Is there a work around or a fix? Mark
Snapshot for CPU, Memory and Disk Utilization problem for NT
Hi, Why the snapshot for CPU, Memory and Disk utilization not working for NT 4 Server? Windows 2000 and 2003 is working well. Anyone able to resolve this problem? regards, Derrick
error after updating to msp 6005
after i updated the central and restarted the probes i get the following message on one probe: Exception in thread "main" java.lang.NoClassDefFoundError: com/adventnet/management/log/LogUser Ffor detailed error view error.tx file that i attached. I restarted the server, but the problem is the same.
NOT ABLE TO SEE THE INTERFACES
Hi, i have installed the OpManager and configured four 6500 series switches. But iam not able to view the interface on the window. Can any one guide me to do this task.
Notifications Granularity
The ability to have more information included in notifications. The ability to parse trap information rather than including the entire trap information in each notification.
CSV Import for Global Environment
I requested the CSV import feature for switch port mapper. I would like to see the same feature applied the Global Environment for adding Devices and Subnets.
Deleting Database files
I have to continually remove files from program files\adventnet\me\opmanager\mysql\data\opmanagerdb\statsdatax_x_xxxx.*** almost daily in order to continue to get information. After I delete the necessary file, I restart Opmanager and it works fine for awhile. The next morning, I have to delete the file(s) all over again. Will this bug be corrected soon?
IP-Address resolution fails when client uses DHCP
I have some network-printers which use DHCP to get an IP-address. I discovered the printers and OPManager stores them in the database. whenever one of these printers is switched off nad on again, it gets another IP-address from the DHCP-server. But OPManager still uses the old IP-Address to ping the printer. So it does not respond to this address and OPManager thinks the device is down. When I manually ping the printer with OPManager, it responds immediately. So it seems, that the monitoring is done
System Name
If I change the name of my windosw system do I need to do anything in the oputil software license key to reflect the name change?
RPC server is unavailable
Hi there, I have a server running windows 2000 SP4. From Opmanager (the same subnet with server), I could not wbemtest to that server, no matter I use the local administrator account or domain administrator account. From that server, I can run wbemtest to itself. And the error message is "win32, RPC server is unavailable". Who can tell me what's the problem? Thanks in advance. Regards, Wang Jun
Daily mail with diskusage % of our fileservers
Hello, We are using OpManager 6.0 build 6016, and I am looking for a way to have an e-mail sent each morning, reporting me the diskspace usage from our fileservers. These servers are Novell Netware machines. I already got the monitor running, and I also tried to get an alert running that mails me when the disk usage is over 50%. Since the disks are always >75% filled, I thought this might be a way to get me informed about the disk usage at that point. But it only mails once when that limit is exceeded,
REquire assistance
right i am currently running a central op sever and on probe except the probe is a vmware OS is this possible because the probe installs fine but when it boots up it gets stuck on verify web server what does this mean it wont load up past this point we do run a IIS service
Solaris Disk Utilization
I have two Solaris 9 servers, which opmanager 7 reports the disk utilization of one server at the correct level and the other server is at 100%. They are both at the same OS patch level and they are running the same snmpd.conf files and the same version of net-snmp. Any suggestions?
Problems showing some pictures
Availability Distribution and Average Availability as example are not showed on the webbrowser. It is just a "red cross" there (like other pictures not showed on websites). I've tested it with different clients. Any clues how to solve thsi problem? Mike Affolter
probe authenication key help
i would like to ask a few question on this subject my senerio is central server installed on NOC prob installed on x location lets says we will be creating a new NOC in the same network and will faze out the old NOC with a new NOC or change the location from a server to another server will the probe still point to the new NOC or is there away to re direct the probe to another noc with out re installing it and getting a prob auth key from the central commnad? also i have looked at what ports have
Unable to Start OpManager as a Service
I located a copy of OpManager 6.0 on one of our servers and deleted the installation with the intention of a fresh start. Now after deleteing OpManager I get a constant error that port 80 is already in use (its not that we can find) and that OpManager cannot start as a service.
HP-UX servers problem
Hi, I have recently added true 64 servers to my opmanager7, when i click on the server from server list it opens a page that does not show the graphs of the memory and cpu and disk (that are similar to the clock), but when i click on CPU or Memory or Disk from the performance monitor i see the graph, so how i can configure it to show the graphs?
OpManager 7 -- changing alert level
I set up a threshold alert for disk space on a server. By mistake I left the level of the alert as attention. The alert was triggered, and I realised it should be at the 'Trouble' level. I deleted the alarm, and changed the threshold on the server to create a 'Trouble' alarm. However, no matter what I do the alarm comes back as 'attention'. How do I change the alarm level!
Opmanager 7 -- alert escalation
It appears that 'Attention' alarms can not be escalated. An alarm escalation can be set to run at a given number of minutes. However, that number is only 2 digits -- up to 99 minutes. I would like to escalate "attention' items that are over 24 hours old, and run that escalation once a day. Is there any way to do this?
reg. community
Res. Sir. At every stage it asks comunnity password with out that it dasn't go ahed nmshingote
PartitionWiseDiskDetails - Memory Buffers
Hello, We have a brand new server installed, RHEL 4 with 2 Gb RAM. Opmanager is returning a plus 80% value for the PartitionWiseDiskDetails - Memory Buffers value. This is less than than 10% on other servers. Anyone knows what this could be.
monitoring iSCSI
Hello, does someone knows if it is possible to minitor ISCSI? regards sjoerd
External Router / Gateways In Business Views
Is there anyway to monitor a link to an external internet connection from a Business view. we have out internet gateway and want to confirm in the business view the traffic on the external port and it's status. Regards Mark
All Disk Usage Report Shows RAM.
Starting with OpManager 7004 my disk usage PDF reports are now showing virtual/physical memory as part of the report. Obviously, they shouldn't be as this is not a disk drive - its RAM/disk cache. David.
OpManager 6 Errors
Hi All, We have been running OpManager version 6 for a number of months now and are very pleased with both the product and the level of support we receive. Having a few issues fixed now by the forums and the help desk I thought I would also post this problem as well. Over the last few months we are having issues with out OpManager Service and I don't really know where to troubleshoot issues. It seems that OpManager will be running fine for a period of around 3-4weeks, then will start reporting that
The Login page don't show any box to input user and password
Hello, I have installed OpManager 7 in Free version (Windows Installation, port 80, Mysql, use in services mode). The two service "ManageEngine OpManager" and "ManageEngineOpManagerApache" are running and in the Task Manager (WinXp SP2) I see 2 process "Apache.exe" and 1 process "Jave.exe" and 1 process wrapper.exe. When I run "Start Client" from icon tray "Manage Engine Opmanager" my internet browser (IE or FireFox) start and point at the URL "http://localhost/LoginPage.do". This page is blank (but
OpManager 6 service crashes daily
Hello, We use the most recent update OpManager 6. since 4 months, our OpManager service crashes everyday. The time differs every day, but mostly in the night. In the Windows Eventlog, it only tells me that the OPManager services (both!) stopped unexpectly --> The ManageEngine OpManager service entered the stopped state. The ManageEngineOpManagerApache service entered the stopped state. By manually restarting the service (from Services.msc ), OpManager continues to run (for 16 hours or so...). I suspect
Windows 2003 R2 64 bit network auto discovery fails
"The Netgroup Packet Filter service failed to start due to the following error: This driver has been blocked from loading" "\SystemRoot\SysWow64\drivers\npf.sys has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver." Heres the event logs. Looked through KB, manuals, not luck. New to 64bit so maybe I need to tell it to use 32bit for sys file.
The Monitor did not respond to the test request
Hi, I tring to configure the Disk Utilization in Performance Monitors using CLI protocol, but i recieve this error message when i execute a test "The Monitor did not respond to the test request". I see the secure log in my Linux System and i found this error message: "Did not receive identification string from XXX.XXX.XXX.XXX (XXX = OpManager IP)" I think is a configuration error in a Command Prompt, Login Prompt or Password Prompt because in the fields User Name and Password I put my logging to
no Interface view on router/switch devices
Hi, Since migration under Linux Mandrake, i can't see the interfaces on my devices. When i "rediscover" i can see these interfaces, i click on add button but after no interface show. Some can help me OpManager 7 build 7004, Linux Mandriva 2006
Google Gadgets or Yahoo Widgets
Are there any google gadgets or yahoo widgets that work with OpManager?
Inventory SnapShot
How to add network devices to Inventory SnapShot (license bought). Devices don't appear on "Hardware : Assets By Manufacturer" but ... some of them appears in "Software : Assets By OS". How to force in order to add devices to Inventory SnapShot? Short info: OpManager MSP Edition 6004 version. Device licensed - unlimited. Never expires. SNMP works correctly om each device.
Pricing
Hello. Anyone know what happened to the monthly pricing plan for MSP's that was offered? that is the one reason i was going to use this product and if they take that away there is NO WAY I can afford it.
Downtime Schedule
If you setup an "downtime schedule" for a group of devices (IE; Destops) where you do not want to be notifed during the evening hours, but do want to be notified during the day. This is wonderful except when you go in and take the time to disable those devices you do not want pinged, but you do want statisitics on, it puts all of those back to be monitored as well once the schedule time has passed. We have a customer where we want to monitor the statistics of the desktop, but not whether it is up
Next Page