Release Date of Service Pack
When will be the release date of OPManager 7 Service Pack? What are the new features that will be added or enhance? Hope we can download it as soon as possible. Thanks..
Unused Switch Ports
Is there an easy way to have OpManager ignore unused switchports? I get alarms on these when they aren't in use. I can click on the interface port and remove the monitor, but that is a lot of steps for a lot of ports. I wondered if there was a global configuration to ignore switch ports that aren't in use.
OpManager Exchange 2007
Does OpManager Support Exchange 2007 with the current version?
Port mapper
I am having the same problem shaggy was having on Fri Feb 15, 2008 12:53 pm. I can not see any of the devices connected to my Cisco 2948G switches. Were you able to resolve the problem?
not getting schedule report from MSP edition
Hi, I am not getting the schedule report from OPmanager MSP edition. I have configured the schedule report for all devices availability (daily). and am able to see that report in opmanager. but its not getting deliver to my email. i have configured the mail server settings correctly. Could anyone please help me on this. Thanks in advance Haja
Install Question Mac OS X
Hi, I have some OS X servers which i wish to monitor via Opmanager, what i'd also like to do is install this on either Tiger or Leopard server. Knowing this is likely not supported, has anyone tried this and had any success? if so any issues / instructions you could forward on. Thanks....
'ports down' messages
Hi, I'm trying to remove the 'ports down' message from alerts as they go up and down so often with machines going on and off. I've disabled it in 'SNMP trap processing' but they still seem to be coming through. How can i stop these? thanks, Matt
Start probe on Ubuntu
Hi, When I try to start MSP Probe on Ubuntu typing sudo ./startdms.sh it says generate ssl certificate using ssl_gen.sh. When typing sudo ./ssl_gen.dh it gives me a failure saying, ./ssl_gen.sh: 31: Syntax error: Bad for loop variable. What am I doing wrong, can anyone tell me how to start the probe on Ubuntu?
i hope update web-page in opmanager
i hope auto refresh web-page in opmanager. so, opmanager web-page is auto-update 1 second per? available? i want a way. help me.
How to monitor a software application
Hi I just downloded OpManager (I already have NetFlow Analyzer installed). My goal is to isolate and find the cause of end user application slow response time. Is iy due to Network slowness (bandwidth saturation / excessive CRC errors...) OR the Application/Database running under Unix server is slow ? How to proceed please, step-by-step if possible Thank you
Service Reponse Time reports - no data available
Hello - i'm hoping somebody can provide some assistance in regards to the reporting page in Opmanager. At the moment some of the reporting works, and others doesn't - for example the 2 Detailed reports on the Server page work, but the Health report only shows availability but everything else appears as "No Data Available" The area i'm trying to get information out of is the Services section - where all options return the "No Data Available" If i go to any of the individual servers things are displaying
Rack view
Hi, i would like to know how create a rack view please?
extreme networks Summit 48si mib
Hi all, Anyone have MIB file for summit 48si and Alpine3808 to make cpu, mem and others to work? Please share. Many thanks...
Issue with Alert
We recently upgraded to Opmanager 7 from 6 and are experiencing an issue with an alert. In Opmanager 6 I set up an SNMP monitor to monitor disk space usage. The name of it was "Partition Details". I then set up an alert to notify us when a partition was 95% used. The alert would be sent out to us via email stating the server name, the partition, and the value. Now when we receive the alert all it states is that the disk is running low on space but no value for which partition. Sample of Opmanager
Cisco 4215 IDS Sensor
Hi, Could you please tell me if there is a device template to monitor a Cisco 4215 IDS Sensor? thanks, Matt
Data not available. BRIDGE-MIB might not be implemented
I am getting this error message when trying to use the Switch port mapper on my cisco 2948G. How can I run the Switch Port Mapper for these switches?
MediaRacer 100 Cameras
Hello Comunity, Well I have a Sistem Of Cameras (Media Racer 100 Series) that works with SNMP, all the Sistem is working with the SNMP and I wish to connect this sistem to the Opmanager. How can do This?. Thanks for your support
Restriction to Clear Alarms in OpManager
OpManager should have a feature that do not allow some Alarm to be cleared when this one is as UnAssigned.
Network view not created
Hi, When I add a device via add device in the admin tab the info returned is device added successfully. However, the network view is not created. Also, when I try to add another device or a new device, I will get the error "Entries for the device are either partially added or removed.Click [here...] to remove and readd the device". I am using MSSQL database. I tried doing a Select * from Network and no rows are returned. I found traces of the servers (classname: IPAddress and SNMPInterface) in managedobject
Cannot Change Device Category from DomainController
I am using the free version of OpManager 7 (7025). After adding a device (Windows Server) I changed the Category from Server to DomainController. When I tried to open its SnapShot window I received this error message: "Active Directory Monitoring Add On Feature is not licensed." The SnapShot was not performed. I want to change the Category back to "Server" but there is no way to do it. If I delete the device and add it again, it is added into the Category "DomainControllers". How can I get it out
Note: Download description when add interface
I have interest in see the description name of interfaces that i add to Bandwidth Monitor. This characteristic is possible?
ColdStart Events
What is the difference between the following events? ColdStart : SERVERNAME.1.3.6.1.4.1.311.1.1.3.1.3 ColdStart : null The events are from different servers. The ColdStart : null event seems to happen all the time on that server, but the computer is on a battery backup and is able to be pinged. Alerting for that computer is every one minute but I never get an alert that the server is down. Any idea what's going on?
The Windows Firewall has detected an application listening
I'm getting these critical alerts from a windows 2003 server. This server has both IIS and SQL 2000 (sp4) running. I've searched quite extensively but am unable to come up with any reasons for it. I don't have the "Windows Firewall" ID=861 Source=Security Type=5 Message=The Windows Firewall has detected an application listening for incoming traffic. Name: - Path: C:\WINDOWS\system32\lsass.exe Process identifier: 420 User account
SNMP Alert Names
Hi, Why do my snmp monitors for disk space always have the wording "Serial number xxxxx" on the end of it? Can't I just have the name of the partition and the partition name as the text? e.g. c:\ Label: OS Instead of C:\ Label: OS Serial Number 14729f0c How can I remove the Serial Number part? ???? Thanks
Can't Update OpManager and URL-Monitor empty
Hello together. The last update i installed to OpManager, via UpdateManager.bat, was 7023. Now, if i try to install 7024 or 7025 i won't get an error, but i can't open the website anymore and get an empty site with: webclient.error.page.msg Installed Service Packs (see image): AdventNet_ManageEngine_OpManager-7.0-SP-2.3.0[7023] AdventNet_ManageEngine_OpManager-7.0-SP-2.0[7020] Also: At the Homepage of our OpManager there is the Infrastruktur Snapshot: URLs. By clicking on it i get to the map, but
What is the proper sequence to load additional Cisco MIBs
a) Does anyone know the proper order in which I should load the various SNMP Cisco has available for its 2821 series routers - the list on Cisco's site is alphabetic. b) There are about 100 MIBs, but which are essential to OpManager?
monitor process utilization?
as I posted before, we are currently testing opmanager against other platforms. We would like to know if opmanager can monitor how much memory and cpu a process or service is using? For example, if msword.exe usually uses 20% of the cpu and 200mb of memory, I want an alert telling me that msword.exe is now using 75% of the cpu and 500mb of memory. thanks nf
Monitoring Windows NT via WMI
Can i use WMI in monitoring resources in Windows NT servers?
Agent for OPManager
Is there an agent that we can install on the PCs/Servers that we want to monitor if we dont want to use SNMP or CLI or WMI. Hope you can include this if not available. it will be very helpful for us. No need to configure on the monitored device specially the servers. Thank you very much..
New Template monitor specific oid
Dear Support, I have created a new template and wish to add custom monitor of specifc sub-oid to the template. The selected oid (ltmPoolActiveMemberCnt) from mib browser will return 4 results but I am only interested to monitor only 1 of the sub-oid. The add new monitor option 'snmp oid' is a read-only testbox and do not allow me to manually add in the sub-oid string. ltmPoolActiveMemberCnt.9.112.111.111.108.95.111.112.114.100:2 ltmPoolActiveMemberCnt.9.112.111.111.108.95.111.117.97.116:0 ltmPoolActiveMemberCnt.12.112.111.111.108.95.111.112.114.100.99.111.110:2
Availability Report incorrectly showing as down
Hi, I am using ops manager build 7025, and am having problems with the availability reporting for one devices. This devices is reporting as being unavailable 100% of the time, even though it never misses a ping, shows it's interfaces as being up etc The device in question is a cisco catalyst 3750 switch, and is directly connected to the op-manager server Any help would be appreciated.
opmanager server redundancy failover
How can we make a backup server, or obtain redundancy on a central server. Thanks, aard
Add link
With MSP a field where you can create links to other applications. Eg ADmanager etc. when you click on that Adm will open.
problem with install OpManager on enterprise SuSE linux 9
hi evey body when install OpManager on SLES 9 and finish appear nunable to resatrt mysql daemonnUnable to create database Exiting OpManagern################################ni try to change path of mysql /bin/mysqld to /usr/sbin/mysqld & change owner for /usr/sbin/mysqld to nobody user and nobody group . ni dont't know solve this problem although mysql daemon is still running
OPManager 7 Monitoring
OPManager 7 can monitor SQL server how about Microsoft Commerce Server, can it monitor also. If not, hope you can add this on your updates. It will be very helpful for as who monitors web services. thank you very much..
ProcessorQueueLength
help :error This could indicate the CPU is not fast enough to process requests. : ProcessorQueueLength : Curent Value : 14 : Threshold value : 7 : Severity : Critical : Rearm Value: 6
Unable to create window credentials
Hi, I'm looking at the trial version of Opmanager (build 7025) running on W2K3 and MS SQL. Great product however I have come across an issue, I'm unable to create or edit windows credentials. When I click apply the screen clears and nothing happens except java.exe hogs the processor. I can setup or edit SNMP credentials with no problems. Any ideas ? Regards, John
Entries for the device are partially added but won't remove
I had a server that disappeared and now when I try to add I get the following message "Entries for the device are partially added or removed. Click here to remove and readd the device" However, when I click it does nothing. I just get the same message when I try to readd. I followed the following KB to no avail. http://support.opmanager.com/sd/AddSolution.sd?solID=1808 and 1. Connect to mysql database by going to /opmanager/mysql/bin folder from command prompt and execute the following queries. :\>mysql.exe
30 day report
I'm trying the Openmanager 7 on Linux. IF I choose 30 day reports, it's show me one point of traffic for each day. It's possible to change it, to become more detailed, like, 24 or 48 points for each day ?
can't cpu and memory utilization graph in the device page
Hello support, my problem is like that: I added new template device and add for it new custom monitors and also cpu, memory and disk utilization monitors of net-snmp. I associated the new template to a linux monitored station with net-snmp. all the monitors work fine when I test them, but the cpu and memory graph on the main snapshot page is not showing anything ("No Data Available"), on the other hand disk utilization graph work fine. can you help me resolve this problem?
Next Page