Problem creating custom Linux monitors
I would like to add a custom monitor that gathers the number of current TCP connections using the command "netstat -a | grep TCP". the result is a simple integer. How can I add this to the existing Linux CLI monitors?
Problem with linux disk space calculation
Hello all, This my first post to this forum. Its just 1-2 weeks i am using OpManager for monitoring about 100 servers. Especilly i am using this tool to monitor the disk spaces of servers. The disk space shown by OpManager for windows servers is fine, but the problem is with the linux servers I found the disk space calculation for windows and linux servers is done using same SNMP OID. This shows exact free disk space for the windows servers but for the linux servers there is 5% added to the free
Problems with interfaces
Hi, In the OpManager 6.0, I added the utilization Tx and RX�s monitors from snapshop device,but now in the OpManager 7.0 how can I do it? Thanks I. Delgado Especialista :P
Cache Hit Ration Values
We have a server running MSSQL 2000 with the SQL Monitor added to it's profile. The values in the dashboard monitors are showing different values from the MSSQL monitor below. The Dashboard SQL Specific Monitor shows 88% while the one below it shows 74%. Thanks, Joe
Correct Utilization
When I upgraded my server memory from 2GB to 5GB then check Asset Details on Snapshot View it still reporting 2GB. Memory utilization is still 100%. Then I edited the Asset Details manually and change 2GB to 5GB. Then memory utilization drops to 85%. My question is does OPManager depends on Asset Details in generating memory utilization. Hope you can provide answer on this. thanks..
Cannot Create Custom Monitors
Hi All, When I enter Admin -> Custom Monitors section, it displays a list of custom monitors I created via OpManager 6. Am I to understand this has now been made redundant and Custom Monitors are now created via Device Templates? If this is the case, I cannot do what I need to do from what I can see. OpManager 7 forces us to select a specific OID from the MIB selected. My problem is, using the UCD-SNMP-MIB I need to select the extResult.1, extResult.2, and extResult.3 values for example. These are
OpManager MSP Business View Reports
I am wanting to write reports on existing alarms associated with business views. Which table has the alarm info in to drives the status of the Business Views? If someone has a query that has this already, that would be great.
Switch Port Mapper - Somewhat works
When I use this feature, it pulls some of the IP's connected to it and sometimes it doesn't. If I choose different servers it seems it it will get IP's not listed on the first one and doesn't get ip's that the other server listed. My question is, is why does switch port mapper not near 100% consistent. I heard it uses the ARP cache, but what is that and how do I update the cache?
Monitor Values not showing
Hi, How can I troubleshoot this problem, can anyone help me? I add a image of the problem. [URL=http://img396.imageshack.us/my.php?image=opmanagerch1.jpg][/URL] Thanks
command sudo
Hi, I'm connected with a solaris device by ssh (without command login and passwd prompt). I would like to create a custom monitor with the command: sudo iptables -L -n | wc -l Can someone tell me how i can do? I tried to create the custom monitor. As the command sudo needs a password, I put the correct password in the field prompt password in the link password of my device. But the monitor returns the value 0. I think the problem is the password needed by sudo and not the custom monitor. If necessary
How to (if possible) make a Trial Probe to become a Register
Hi Was doing some testing whit extra trial probes and i now need them as Registerprobes. I ordered new licenses from david to day. Is there anny easy way to make these probes Registered ones? Whit my new license. Becurse if i make new probes i cant use the name that i used on the trial ones and i need to do lots off configuring.
Device already present in the system
Getting error message "Device already present in the system" but I searched for the IP in Opmanager and it does not exist. I am running Opmanager 7 with build 7027.
Event Log Rule - Alarms
OpManager 7 build.7023 We created an Event Log Rule monitor on a server. An alarm was triggered and I was sent an email but nothing appears in the Alarms view. And since there is no way to clear the alarm I get an email alert ever 15 minutes. This is what I see; Currently there are no open alarms for the Device How do I clear the Alarm?
Specific Linux Cpu Monitoring to graph
Helo, im trying to create a custon linux monitor that shows the iowait, system, and user cpu of my RHEL40 servers. But im not able to add the monitors after add them to the hostresource.xml and opmanager_graphinfo.xml Example for wait cpu : Hostresourece.xml <CATEGORY ID="Wait CPU Utilization" command="top b n 1 | grep -i 'Cpu(s)'" parseAll="false" description="Percentage of CPU used is monitored periodically and displayed."> <ENTITY ID="WaitCPUUtilization" applyThresholdOver="curValue" threshold="Th6"
alerts when data not collected
Hi Is there a repotr available, or better still can you point me to the correct MSSQL table to find when a device hasn't polled e.g. C:\ snmp partition details not collected for last 3 tries. We do have occasions when snmp stops retrieving data and this would be a good way to spot them without having to go into each device? Many thanks
How do I monitor a process
How does one monitor a process in OpManager? In this case I am trying to monitor Syslog.
WMI Problem
I've been struggling with this for a few days and just can't seem to get it to work. I had a few set up for this but we lost a drive and I lost all of my scripts and I have to recreate them. Basically just a script to see if a process is up. It works from the command line but when I test it I keep getting "The Monitor did not respond to the test request" OpManager version 7 -------------------------- From the command line I get: C:\Program Files\AdventNet\OpManager\conf\application\scripts>cscript
SMS using usb attached mobile phone?
Has anyone had any luck using a mobile phone connected via a USB cable to be recognized by Opmanager? I have tried all the troubleshooting tips in the KB but nothing seems to get it work. I know that the phone I am using is not on the supported phones list but I figured I'd give it a go anyways. Opmanager just refuses to recognize it. Changing baud rates and com port settings don't help either. Just wondering. Thanks! -SAm
Custom monitor using SQL query
Greetings, I'm trying to find out if we can create a custom monitor in OpManager using a SQL query against a MSSQL database? Thanks, Steeve
How to take the mysql dump of opmanager msp edition
I am not able to take the mysql dump of opmanager msp edition .Actually i am not able to find the mysqldump in mysql dir inside the Central.I am using the Linux Box. What i have to do to take the mysql dump.Give me the steps to get this dump lokeshkumarn@aim.com
Proper setting for traffic counter
When adding devices to OpManager, some are added with the traffic counter set at 32 bit and others are at 64 bit. What is the proper way of setting this option? Does it really matter? This happens on devices from the same vendor, same model number, with the same version of firmware.
Cache Hit Ratio(SQL 2005 Server) Monitor
On our SQL2005 servers we cannot see the Cache Hit Ratio(SQL 2005 Server) monitor under Cache Monitors, it's just not being shown. We cant change the threshold value or disable the monitor. It keeps generating alarms.
Can't Open Custom Monitors!
I added a few custom monitors, then later decided to drop a couple. So I deleted one, and when I deleted it a page that says "Error!" appeared. Now whenever I try to go into the Custom Monitor page it gives me the Error page and I can't add any monitors. Also, in the error logs I get a Java NULL pointer exception. Any help would be great, thanks.
dear ramesh...no display.
dear ramesh I'm followed. first. add monitoring -->checked cpu utilization, memory utilization etc. snmp is check. second. screenshot chenck. but, no display. give me a next step notice.
Test Credential CLI failed
Hi, CLI credentials tests, except one, are failed. However, logins and passwords are corrects and i can be connected on devices with putty. someone can help me?
Change the IP server
Hi, I need change the IP Server. I am using OpManager 7.0 with Database SQL 2005. I did a change the IP Address in the server, but OpManager doesn�t work. What recomend me to do in order to OpManager will work fine? Thank & Regards I. G. Delgado Especialista :o
Device templet bug.
When you add a new monitor to the Device Templates, such as Disk Usage, it will remove any manually added performance monitors and remove all the thresholds. The test. Added a monitor to a Linux(Any device works) Server (Delivered Mails) Went to "Device Templates" --> "Linux" and add "Disk Writes" "Apply" to all, the default. Go look at my Linux server. The "Delivered Mails" monitor is now gone. To make this work, all the Thresholds are gone! Is this just me? Can any one else replicate this.
Discovering SNMPv2 devices
we are having a hard time discovering SNMPv2 devices with OpUTILS 5, It does SNMPv1 no problem. When tryng to discovering v2c devices, OPutils just sits there. gengg
Firewall Analyzer reports only show VPN clients
I have successfully integrated Firewall Analyzer (FA) as an Add On to OpManager. However, when I view FA reports for particular servers, the only clients that show up in the report are VPN addresses. In addition, I think the client IP address and the associated user for each record is incorrect. As added information, in Firewall Analyzer I have two Intranet IP addresses listed, our internal subnet as well as the VPN subnet. Any ideas?
Error when adding a device
Hi, When i go to add a device into opmanager i am recieving a strange error. When i go into admin and then into add device. i enter the name of the device and then click Add Device. OpManager then comes up the top with an info message saying Device already present in the System So i try and search for the device name. and i get the following message No results found for pc626 and it asks me if i want to add a device. We are currently stuck because i am unable to enter this machine, and we want to
Cannot start OpManager
Hello, am using RHEL5. i've installed OpManager7 successfully. but while trying to start OpManager (./StartOpManagerServer.sh) i get the following errors at first: cp: cannot stat `/opmanager/OpManager/apache/ssl/backup/ssl.conf': No such file or directory The File: /opmanager/OpManager/apache/ssl/ssl.conf does not exist inside addon check tables are created, processes start, then i get the following error msg: Verifying connection with web server ... Failed to establish connection with web server.
No CPU, Memory etc....no display.
Dear opmanager-support answer. thank you.. test credential is snmp passed but, no display cpu, memory etc. Your answer did followig but, no answer help.. have a nice day!
Templates Problem
I have a Zyxel MIB file, I uploaded it in OpManager. How do I convert it to template? Also, I created a template for Zyxel with correct OID, but OpManager still failed to identify the Zyxel switches correctly. They are being identified as desktop. I have to manually change them to Zyxel. Also after changing them to Zyxel switches, Opmanager is unable to rediscover interface and I have to reconfigure the password to one of our SNMP keys - again - manually. We have over 500 switches, is there anyway
SMS Port Number
Hello. We attempted to connect a USB cellular modem for SMS, but it did not work and we uninstalled it. However, under Admin>SMS Server Settings it is still requiring a PORT NUMBER to be entered or it will not save the setting (error box: �Please enter the port number�), and obviously, we can�t enter a port number because the modem is no longer attached. How do we remove the modem in OpManager build 7027?
Availability reports
Hi, I'm trying to produce availability reports for our SLA's and i was wondering if opmanager can do reports for just our service hours. I'm trying to do an entire year but just between 8am-6pm and all i can seem to do is 8am on 1/1/07 to 6pm 1/1/08 which i assume is the full 24hr periods in between. thanks.
AutoLogin and business views
Hi, when I use the autologin feature (see knowledgebase article below) for a read only account in I cannot see the content of business views (It just says ???????????????). However when I logout and then login interactively with the same guest account business views just work fine. This behavior started in V7, V6 was fine. I really only need the business views working for the guest account :-( http://support.opmanager.com/sd/AddSolution.sd?solID=6606 Thanks for your help Dirk
OpManager doing 300+ gets, ever min!
I had to check this one for my self. about every 3 minuets our OpManager server (cornfield) will hit an system that it is monitoring (coldspark, in this case) with 300+ requests. I only have 4 monitors running, all the default ones for Linux. This is what I am seeing coldspark log # tcpdump | grep snmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 68 bytes 11:31:00.185027 IP cornfield.32823 > coldspark.snmp:
SNMP not monitoring all Local Disks
I have a 64bit windows 2003 server that i have the free disk space in MB monitor turned on in OpManager. Opmanager is only displaying 2 of my 5 disks. Anyone have any ideas as to why this is happening. Also getting an error on the top of the page when i add that monitor that it is unable to draw the graph. Thanks Mike
Monitoring VMware environment using OpManager
Can OpManager be used to monitor Vmware environments and the server itself? Please advise how this can be done. Thanks
Unable to get the Memory graphs
Hi, We are setting up OpManager 6 build 6016 . And successfully configured solaris, linux and windows clients. However, for HP-UX servers, unable to get the Memory. Getting "-1" error. We want these details using CLI. Please advise. attach output of OpManager and graphic. TKS
Next Page