Adding SI 2000 Phone Station
Could I add SI 2000 phone station with snmp features
Source for Rogue Devices
Applied the latest hotfix, and Im still not seeing the "source" of devices. For instance, Oputils is polling some routers to get the mac addresses. There are not any managed switches at these locations. The device shows up, and I have no idea where it is. Now most instances you can be pretty sure by the IP, but others I cannot. For instance, what if a machine tries to get on the network without DHCP and a different subnet. Of course, it wont work. But then it uses dhcp and gets a valid IP, this would
how can i use parser
did find how to use Trap parser i create file , not trap.parsers name=test22 customMatchDefn=.1.3.6.1.4.1.22.22\:369; entityDefn= nodeDefn=$Source color=-3407668 helpDefn=$GenericType-$SpecificType.html networkDefn= ST=0 agentAddressDefn= GT=-1 textDefn=$* sourceDefn=$Source domainDefn= enterprise=.1.3.6.1.2.11 severity=2 when i have to tell OpManager to use it
Ping tester
Hi, Quick question: Does Opmanager have the capability to do periodic pings to certain devices, and if that ping exceeds a certain latency level, like above 500ms, it will generate an alarm? Appreciate any insight into this matter. Thanks!
Custom WMI monitor for W3SVC performance counters
Hi All, I've tried contact support several times about this, but haven't had a response yet. I'm trying to create a custom WMI monitor for W3SVC performance counters, I've created the attached script which queries the server for CurrentConnections, AnonymousUsersPerSec, ConnectionAttemptsPerSec, CurrentAnonymousUsers, FilesPerSec, MaximumConnections. This works from the command line, but I can't get it to integrate with OpManager. I've followed the steps in knowledge base article 25802 to integrate
OpManager7 stuck at Configuring Authentication when restart
OpManager7 stuck at Configuring Authentication when restarting. Please help. I finally got every device in the system and alerting properly and now OpManager stops working...
WMI authentication
Hello, I am running Opmanager build 7102 on a windows 2003 server. I'm trying to monitor some windows 2003 servers, but I am unable to authenticate. I tried discovering the devices, but that only added a generic desktop. I configured it as a windows 2003 server, but when trying to test authentication, it immediately reports failed.
second port
Could i run OpManager on 2 ports 162 and 2162
Could I Add New Device
I need to add telephone station with snmp Could YOu help me ps I 've a MIB
Change Traffic Utilization over threshold severity
I'd like to change the severity for Traffic Utilization threshold alerts. Currently these alerts are "Trouble" I'd like to change them to "Attention" Can I do this, and if so, how/where do I do this ? Thanks...
Port Information not present
Since I applied the latest hoxfix I have not been able to mapped the switches. I keep getting port information not present. Thanks,
autoClear
I have a problem with autoclear traps had the same fields OID enterprise, GT, ST everything, but one field in TRAP PDU - fltfield if fltfield=1 then is's a problem - Critcal, else fltfield=-1 Clear could i get different severity and auto clear them.
Event Log Rules - exclusions
Is there any way to configure exclusion event log rules? We are monitoring the system and application logs for any errors and warning, which is very useful but it also generates alarms for events that can be ignored. Instead of configuring rules to generate alarms for event's I'd like to see, it would be much easier to configure rules to ignore event's we can ignore. A couple of examples are: When logging into a server via RDP, the server logs errors that it can't install the printer drivers from
addition fields to compare
in trap.parse some fields to check trap GT, ST, trapOID etc could I add another field to compare. this SNMP PDU contains this field. Thank You
Values are not updated any more
Hi, I installed OPManager 7102. I discovered my network, added all necessary monitors. It works fine. Today, I checked my monitors and all values showed N/A I tested my monitors, which worked fine the day before and most test did work fine. So the values were updated. When I checked back an hour later, the values still remeained the same. Even when I set the monitoring intervall to 5 minutes, I only had the one vlaue, I got when I tested the monitor. After testing again, I have two values in my reports.
Business View size limit?
What is the max size of a business view? I am trying to add 41 devices and it tells me some of them are outside the background image. I am not using a background image.
"Add Subnet" should allow any subnet mask
When I try to Add Subnet manually, there is a dropdown menu for the Subnet Mask, which only contains common masks. We use variable length subnet masking, 3 of our subnets are 255.255.254.0 and one is 255.255.252.0. Please change this field to be a text input field rather than a dropdown menu, or add all possible masks to the menu. Thank you, -- MB Marion Bates
How do I monitor SNMP?
How do I monitor SNMP. It responds on port 161, but UDP, not TCP, so a service monitor does not work. If SNMP dies opmanager does nothing. How do I fix this. -Adam
How do I add a mib to Net-SNMP in linux?
I have run out of google searches to try. I have the dell-poweredge mib. I have placed it into /usr/share/snmp/mibs. Then export MIBS=+ALL Try to get any value in the ".1.3.6.1.4.1.674" range, I get a "Request failed or timed out. No error" from OpManager, or nothing from the snmpget at a command line. Any ideas?
Best way to add unreacheable devices ?
Hi ! I want to monitor multiple WinXP worktstations which will send SNMP Traps, but I won't do any polling of the device. Situation is : There is a varying number of workstation in a DHCP range say 300 desktop in the 192.168.10.50 to 192.168.11.249 range. In opmanager, if the device (IP) is not created, the Trap is dropped (They dont even show in Unsollicited Traps) So I must create each possible IP in my Desktop category, Wich wont be polled, but the SNMP trap will be received. The IP adresses doesnt
Escalation question
Hi, We have set escalation based on different rules. Today we have a Windows service stopped due to a bug in application. We don't want to remove the monitoring of this service, we have acknowledeg the alarm and in my understanding the escalation should not be sent as alarm is acknowledged that it means that we are aware with this issue. Can you tell me if it is normally that the escalation still working once we have acknowledge the alarm. For us escalation is used to send alert if the first level
URL Proxy
Hi All, Just wondering if it is possible to configure different proxies for different URL monitoring. We require this feature as we have a range of internet services we would like to monitor. Cheers Chris
Sequence required to add Cisco devices
When adding new Cisco switches to OpManager I have noticed the following: If you add the device IP address to OpManager before you configure the SNMP settings on the switch, OpManager will constantly report alarms for various interfaces (even if you have turned status polling off on those interfaces) even after adding the SNMP settings to the switch. And for some reason these alarms also include the System UpTime field. Rediscovering the interfaces does not fix this. I have found that if I configure
Strange behaviour with Opmanager Catagories
Hello, I have 6 domain controllers 3 are correctly identified and 3 got added to the "firewalls" catagory (all 6 are identical). When I try to move them from "Firewalls" or do any activity with them I get the following error message "Status Message Unable to fetch Managed Object details for the object : chpdc01.cofunds.co.uk" I am using using Opmanager Build 7102. I cant even delete them !! Scott.
SNMP request returns a wrong string with the mib browser
Hi, I have a problem with a mib. The mib is IDIRECT_REMOTE_MIB. These are examples: 1 / # snmpwalk -v2c -c public 172.16.6.100 .1.3.6.1.4.1.13732.1.4.5.1.5 IDIRECT-REMOTE-MIB::latencyvalue.5026313 = STRING: 587.60 IDIRECT-REMOTE-MIB::latencyvalue.5038053 = STRING: 534.02 IDIRECT-REMOTE-MIB::latencyvalue.5038276 = STRING: 525.75 ... With OpManager Mib Browser (or a custom monitor) I have: latencyvalue.5026313:553.40��0|� �{� ����|� �|� �|� �|� �|� ��� �|� ?�l���{� �{� �{�䁄 y�l��������������������������������������
Use Domain Credentials
Is it possible to configure OpManager to allow the usage of Domain credentials for logon to the web interface?
savepolleddata api
Good afternoon! Already a problem had postado similar is nen in the site of support obtained aid. Ultilizo OpManager 7100, DB: MSSQL. Today when I was to try to add a new server and the monitors reponsavel mesangem appeared it: " Exception occured in savePolledData api" Already I made the steps that have in the site Support Center: To modify the size of the fields in the PolledData: http://support.opmanager.com/sd/AddSolution.sd?solID=25205 SHRINKDATABASE: http://support.opmanager.com/sd/AddSolution.sd?solID=24901
Download Shared Device Templates
I just created a new device template. At the end, it asks me to share it with the OpManager community. Cool feature. Next question, How do I find them to see what other people have shared? I looked on the web site but could not find anything. Thanks.
OpManager running very slow.
We have increased the amount of devices monitored to 70, with a lot more to go. Already, we have noticed a dramatic slowdown of the interface. The screen now takes 30 to 45 seconds to load each page, which is not practical as a lot of changes need to be made. I have checked the server and network speed and all these are fine. It is therfore a problem with the application. It may be down to the database size, so I have included our settings: Alarms Database Maintain 10000 recent alarms in the database.
email when the service is working after being interrupted
When a service is down, the opmanager send us an e-mail telling that the service itself has been interrupted. On the contrary, it does not send us an e-mail when it works again. My question is: how can we configure it for the system to send us an informative e-mail when it comes into operation again? Thanks so much. Regards.
How to configure Alerting on Switches
When I monitoring Switches I become again and again Alarm Message with Status �Trouble� that some Ports are down. But this Ports are okay, only the Client connect to this Port will be Switched off, when the user go home after work. So it is not really a Problem. How can I deactivate this Alerts?
How monitor VPN tunnels
Hi, I have an UdGataway which have 6 tunnels to 6 UdGateway in its interface xl0 (type=Ethernet). I would like to monitor tunnels in order to have their status (up or down). Is it possible to do this with OpManager? How? I try to make a link between Udgateways but the link status is the status of an interface not of the tunnel. I have the tunnel status when I ping from the main udgateway to another. There is a way to implement these pings in OpManager? Thanks
Downtime Scheduler Issues
After creating a new schedule in the downtime scheduler, when I click on "save" it comes back and doesn't show up in the schedule. I clicked back to the admin tab and then to downtime scheduler once again and the new schedule still does not show up. Opmanager version #7100 MSSQL 2005 Database Backend Windows 2003 Server Thanks, Joe
Get alarm when HA mode active Netscreen 25 firewall failover
I have two Netscreen 25 firewall running in HA mode. How can I configure the OpManager to return alarm when the active firewall failed and failover to the standby one? Regards
MIB Upload error message
I am receiving an error on line 4 column 54 complaining about special characters or numbers when trying to upload the attached MIB to Opmanager 7.1. The area in question seems to be a space and I cannot figure out why it will not load correctly. This is for a startech KVMoIP unit.
Respond time of a custom script is too long : null results
Hi, I have a custom cli monitor which call a script pings.sh This script send pings to several destinations and give the rtt when a vpn is ok. My monitor is ok when all the pings respond but when a vpn is down the ping to this destination take more seconds and thus the monitor return all zero for each vpn (even if a vpn is ok). I think that there is a time out request and when the script take too long time (around 5s), Opmanager stop the script and give results zero. I would like to know if you could
Custom WMI - Monitor Terminal Server Sessions
I've created a custom WMI script to monitor terminal server sessions and thought I would share it with the opmanager community. VBScript (goes in [...]\conf\application\scripts directory): ' Check command line parameters On Error Goto 0 Set objWbemLocator = CreateObject("WbemScripting.SWbemLocator") 'On Error Resume Next Select Case WScript.Arguments.Count Case 1 strComputer = Wscript.Arguments(0) Set wbemServices = objWbemLocator.ConnectServer(strComputer,"Root\CIMV2") Case 3 strComputer = Wscript.Arguments(0)
Problem with MSSQL monitoring
We recently started using the MSSQL monitoring add-on for two SQL servers. The first SQL server was discovered perfectly, and I was given the option to select which databases I wanted to monitor (master, DB1, BD2, etc..). I checked off the boxes next to a few databases and all is well. On the second SQL server, the screen pops up during the discovery and asks me to select which databases I want to monitor, however there are no options to choose from. I don't know where to start troubleshooting this.
Backing up Opmanager MSP with OBM?
Hi. Is it possible to make a full backup of my opmanager MSP installation, using ahsay OBM? Best Regards Kent
access to the code of the java classes
Hi, I would like to know if it is possible to access to the files "java classes".java in order to debug OpManager when I have a problem. I would like to understand better when I had an error in com.adventnet.me.opmanager.server.util.DeviceDetailsUtil.getPollInformation(DeviceDetailsUtil.java:94) I don't want to modify these files, only read the code. Thanks
Next Page
