Error: AuthenticationFailure : .1.3.6.1.4.1.311.1.1.3.1.3
I get this error ( AuthenticationFailure : .1.3.6.1.4.1.311.1.1.3.1.3 ) on A Windows 2003 Domain controller and on a Windows 2000 Server. The Error will come and go without any intervention. I can not find any information on the meaning of this error. Is it a failure of OpManager to connect to the server in question or is it an AD authentication error?
Business View Editor Stuck
Good Day Problem discription: The OpManager works fine as long I just looking at the status and use it as viewer. I can see all devices on my business view map. BUT if i try to edit this map, i can only see a view of the devices. And if i try to add another device, the editor freezes. The only chance to get out, is to close the browser. And if i try to create a new bussiness view map, i look at the loading dialog that seems to have an invineti loading time. So i have no chance to create a new map.
Moving to new server
Hi, I've moved my OpManager installation to a new server. Everything seems to be working except there are a few things missing. I created some new infrastructure views which have disappeared and there are also some devices which appear but when you click on them they can't be found. Any ideas why this has happened? To carry out the move, i tried to restore the databse but it failed so i just copied all the folders over and started the service. MAtt
Windows Uptime
What is the calculation for system uptime on a windows 2000 server machine I am using SNMP .1.3.6.1.2.1.25.1.1.0 The value i get is 7/2/2009 5:09:38 PM (5 ms) : Value: 282812317 I want to know how to calculate it and display in readable terms
which port is require
Dear Team, how should we configure an application port over WAN so that a particular port is required to get open at firewall.Please suggest us somebody to clear this issue. Thanks inadvance, SridharMenda, 09867613433(M).
CPU Utilization is 100%, threshold value for this monitor is 95%: Top 3 Processes:-Idle - 25%;mysqld-nt - 25%;wmiprvse - 25%
OpManager Build Number: 8010 Build Report Title Attention - Report01 - CPU Utilization is 100%, threshold value for this monitor is 95%: Top 3 Processes:-Idle - 25%;mysqld-nt - 25%;wmiprvse - 25% Message Message: CPU Utilization is 100%, threshold value for this monitor is 95%: Top 3 Processes:-Idle - 25%;mysqld-nt - 25%;wmiprvse - 25% Device: Report01 Category: Server Error Condition: Attention Generated at: Jun 17,2009 01:52:03 PM Alarm Details Message CPU Utilization is 100%, threshold value for
Locale problems in Opmanager 8 Cyrillc Russian charset
I make fix mysql/my-huge.cnf: [mysqld] default_character_set = utf8 character-set-server=utf8 collation-server=utf8_general_ci conf/database_params.conf url jdbc:mysql://localhost:13306/OpManagerDB?useUnicode=yes&characterEncoding=UTF-8 AppModules TopoDB-MapDB-EventDB-AlertDB-PollDB-PolicyDB-USERSTORAGEDB mysql> SHOW VARIABLES LIKE 'character_set%'; +--------------------------+---------------------------------------------+ | Variable_name | Value | +--------------------------+---------------------------------------------+
monitoring custom event log
Hi, on a server we have a custom created event log category that we need to monitor - how do we do this?
SNMP Not Working
hi all, We're trying to monitor the CPU utilization for a linux box using the OID of .1.3.6.1.4.1.2021.11.9.0 This is contained in the UCD-SNMP MIB, which we have loaded into the system, and have selected as a monitor. We have verified this returns valid data when using the MIB browser on the default settings of 1 second timeout and 0 retries, but when we try and apply this test to the snapshot, the monitor fails with the following message: The Monitor did not respond to the test request If the
Clicking on Maps tab--no display
I've create a user with read only permissions to view one business view. When they log in and click on Maps. It displays a blank page, no error (map.jpg). Normally with a user with more privileges it will display the first view in the list (Default=servers). Is there any way to set it to default for the one business view they have permission too? Also, when they first log in is it possible to set the home view with the business view they have access to? The dashboard.jpg shows what they see when
applying device templates wont work on certain servers
Hi! When i try to apply devicve templates to certain servers they arent to added, the only device template i want to have is for watching disk usage on paritions with certain treshholds - it works on most of my servers but some it wont. i have tried the snmp service on these and they are lookin just fine. what is this, is this a bug or something? what can i do about it? its really important that i can add certain templates to all servers at once because we have a lot of servers. thanks in advance!
How to monitor devices behind NAT?
I have a router that is performing NAT for a dozen or so switches. The switches behind the router have a port mapped so that they can be managed via HTTP. I want to monitor using HTTP to determine if any of those devices go down since I obviously cannot monitor them using ICMP in this case. The problem is that I can only set each device to monitor using ICMP or one TCP port. I thought about creating a new device for each switch I want to monitor and assigning them their specific TCP port for
Connection to the Database is lost OPMANAGER 8007
Hello, i m using opmanager version 8007 and i m having frequent disconnetion of database in opmanager. When i see opmanager stop collecting data i check " wrapper.log" file and i find error BUT i find opmanager service still running. Then when i restart opmanager service it start all working..... opmanger lost connection every 4 day intervel with its database...do you guys have any fix ?????' ########################################################## INFO | jvm 1 | 2009/06/26 14:45:28 | Connection
op issue
my server that install the Op shut down, i can't run normally after restart, then i reinstall the Op, but i can't check my hidtory data, how can i restore my data?
No monitors are working with Server 2000 Machine
I have a machine with Windows Server 2000 SP 4 but none of the monitors added will work. I get the standard message: 1. Check if SNMP is enabled on this device. SNMP is installed and started 2. The SNMP request might have timed out It probably did cause it takes a long time. I did set the time out to 10. 3. The OID may not have been implemented in the MIB. If this is what I think it is I think the OID is loaded because every other server is using this monitor so I guessing it is loaded. 4. The device
Trending Reports Similar to that on AppsManagers reports
Hi, Is is possible to incorporate trending or historical reports, for cpu and mem utilization as well as availablity..Similar to that now available on the AppsManager canned reports. Thanks Maui
which port is require
Dear Team, how should we configure an application port over WAN so that a particular port is required to get open at firewall.Please suggest us somebody to clear this issue. Thanks inadvance, Sridhar, 09867613433.
High CPU/Idle top process
I saw references to this problem in this forum but no solution. We occasionally get alerts that the CPU utilization on a server is high and above the threshold but the top process is "idle". Is there any specific cause and solution to this problem? Thanks. Mark
OP-manager application stops monitoring every day
Hi, I have Op-manager installed with the DB inside an MS SQL 2005. The application server is a windows 2003. Almost every day the application stops monitoring the devices without any specific reason. There are no Down Time Schedules setup. When i try to login to the web page most of the times bu not always i get an error about the user table in the DB. In the same time the service is running fine. After the restart of the entire server all devices appeared as not monitored for a time. What are the
dashboard refresh rate
i was wondering where i can set the upderate interval for the dashboard? so that it refreshes itself once in a while
CPU Util ?
Hello, Idle process is submit with other processes couses treshold ... ?! Can You help me ? Best regards, Z
OpManager remote monitoring errors
I am a user that monitors a network using a remote log in to OpManager. I work off of two different networks, on the primary one that I use to monitor OpManager I continue to get errors. I am using I.E. and get the error "12152: unknown". On the other network, I can monitor all day with no errors. Unfortunately, due to network security restrictions, I do not have access to all of the settings on both networks to be able to comare security settings, etc. Does anyone have an idea as to what would
Rediscovery interface
Hello I have several cisco 1800 which I will not receive traffic information on the interface. When making the rediscovery displays "Error". Someone can help me? thanks
Rx Tx Traffic NA
Hi, On my Cisco 3845 router, the standard section of interface with all data show the traffic data as Not Available (NA). Before working properly, I have done something that I do not remember that something has changed Why does this happen?
find the attached notes
Hello! Is there a possibility to find the attached notes to tables OpManager 8?
Cisco Unity monitoring ?
Hello, is it posible to monitoring Cisco Unity server ? Best regards ,
Sound notifications on linux platform
I tried to configure sound notifications on a remote Windows XP machine. To get started, I found winexe (http://eol.ovh.org/winexe/) and configure Admin->Notification Profiles->Run Program->New Profile Name: Play_Sound_on_Remote_Computer System Command properties Command Name: /usr/bin/winexe Program Arguments: -U nms%nms //10.1.0.107 "mplay32 /play /close C:\Windows\Media\nms.wav" When running on the bash shell command works when run the "Test action" is not stdout.log 19:04:07:101 PM PROFILE ------------->
All maps gone
Hi, We just purchased Opmanager after a month of evaluation. When we recieved the serial I reinstalled the server to have a fresh start. I have added all our devices and set the correct speed of 500+ tunnelinterfaces and built maps for different businessareas. After a restart of the server however, all our maps are gone! Even the built in ones (see pic below). - - - cut - - - If I add the widget "Business View Summary" to my dashboard I can see all the views I made and number of devices
Version mismatch
Greetings, Just a curious question here, I was looking through my Add/Remove Programs on a server running OpManager, and in there it details that I am currently running OpManager v.6 when I am currently running v.8. Just unusual, but wondering if any one else has noticed a similar action. Rob
Rediscover doesn't eliminate devices removed from ESX virtual server
Can anyone give me any ideas on removing virtual machines from OpManager 7? I do "rediscover", but it doesn't see that I have removed machines. Thanks for any help I may get...
Disk Utilization seen on Op is different than the Solaris Server
Hi, I've recently noticed that the Op disk utilization for one of my Solaris Server is giving me a 98% disk utilization. I've gone into the server mentioned and performed a manual check on the harddisk space. But i note that the disk utilization are still healthy, and not 98% The following is the screen capture when i performed the df -h on the Solaris Server. # df -h Filesystem size used avail capacity Mounted on /dev/dsk/c1t0d0s0 56G 22G 33G 41% / /devices
How to create a custom "CLI" monitor for Windows servers?
Hi. We have a number of batch files and SQL queries we'd like to run with the results returned as value sto be captured by OpManager as monitors. I know how to create custom CLI montiors for our UNIX and LINUX hosts, but not for our Windows hosts. Is anyone able to assist? Regards, LeRoy
Upgrade MySQL failed
Hi, I try to update OpManager 7205 to Version 8 (Windows2003). First Step is to upgrade MySQL Database. I get an error about low diskspace: C:\Program Files\AdventNet\ME\OpManager\bin>echo off buildNo in PreInvo 7205 ------getFreeDiskSpace : path : C:\Program Files\AdventNet\ME\OpManager ------getFreeDiskSpace : osname : Windows 2003 ========Disk Free Space(MB) : 0.0 null Mysql Datadir is C:\Program Files\AdventNet\ME\OpManager\mysql\data\OpManagerDB Mysql datadir is C:\Program Files\AdventNet\ME\OpManager\mysql\data\OpManagerDB
ChangeMemorySize.sh
I am trying to increase the amount of RAM that OpManager uses and I used this script to increase the size from 200 to 1000 but I do not notice any increase in the amount of RAM that OpManager uses. I assumed that this function is similar to setting MS SQL to use a fixed amount of memory, is this indeed what it is used for? I'm running OpManager on Redhat AS 3.
Add Link problem (in BisinessView Editor)
Hi, I created new Link (etc. between 2 routers) in BisinessView Editor and selected Interfaces on first and second routers in Link Properties but Opmanager 8007 can save only one Interface (checked). Why ? Slava.
MSSQL Data Files Size showing in KB
The Counter \General: Data File Size is showing in KB which is causing issues with the MIN/MAX/AVG figures. The attached image is just one of our database's, with all database's on all servers doing exactly the same thing. Is there a way to change the size from KB to MB or GB? It would be great if OpManager could detect the size of the file and represent the size in the most appropriate way. Any help would be greatly appreciated as showing a scientific equation on a report is not ideal. Thanks,
Can i install Oputils 5 to ubuntu server or Red Hat Linux?
Can anyone tell me, how to install and can i install the OpUtils 5 to any of this plaform? Ubuntu or Red Hat, and how? Thanks.
Application to view OpUtilsDB.fdb file
Hi, Been trying to look for an application that can open the OpUtilsDB.fdb file but I was not able to see one, what application can I use to open the said file? Thanks and God bless!
MIB File could not be parsed
I'm getting errors when trying to load the Traps on a MIB File using SNMP Trap Processors - Load from Mibs. and I'm getting the errors from the logs below. Could you please check the file to see if there are characters that Opmanager can't handle? The file does not contain underscores. Thanks, Marcos 16:38:38:312 MISC: MibBean: com.adventnet.snmp.mibs.MibException: Could not parse the file D:/AdventNet/ME/OpManager/./mibs/G3-AVAYA-MIB. The error occured at the line no: 21288 ,column: 19. The identifier
Device Downtime Scheduler Report?
Is there a way or a report that will show what the scheduled downtime is for a device? I've got over 50 diffrent downtime schedules and diffrent devices in each. I would like a way to look at a device and see what its a member of. Thanks
Next Page