Can I monitor a UNIX system using commands
I am trying to monitor specific things happening in my Linux based Jasomi Peerpoint. The item I am trying to monitor is displayed when I logon to the device and issue a "show count" command. This shows me the number of registrations on the Peerpoint. How can I monitor and graph this? Thanks,
SNMP only working for SOME monitors
Im working on setting up all our Cisco switches, routers and access points to use SNMP. I have been successful on about 10 and having problems on 4 ... and I have 40 more to configure. The problem that Im having is that I configure snmp on the switch, and then set up the monitors in opManager, test them and one, say the CP Utilization will work and then the Memory Utilzation wont work... however if I come back to the snapshot an while later they will work... it seems very intermitent. Any suggestions?
current build number
What is the current build number of OpManager 6.0
No CPU and Memory utilization on Cisco router
Hi, I've set my Cisco router C1812, Version 12.4(4)T1: ip inspect name fwinspect snmp alert on audit-trail on ip inspect name fwinspect snmptrap alert on audit-trail on no snmp trap link-status snmp-server community xxxxxx RO snmp-server ifindex persist snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart snmp-server enable traps vrrp snmp-server enable traps tty snmp-server enable traps eigrp snmp-server enable traps flash insertion removal snmp-server enable traps isdn
Ability to configure Multiple states, thresholds and actions
Hi all, First of all.. Probably I'm putting this in the wrong place but I couldn't find a clear place for feature requests.. Sorry for this in advance.. :) OK.. I would like to suggest this.. ;) I miss the ability to specify multiple alarmconditions depending on the state of the device. Especially when you try to monitor UPS's, Relative Humidity or temperatures it might be an incredibly nice feature if you would be able to use several more states than only Trouble, Attention and Critical.., which
Notification Profile Error
Hi I am trying to create a E-Mail notification profile (Followed the methods from the manual), once the profile is submitted, the page just shows an error. Why is this happening Kindest Regards
OpManager not finding devices correctly
Ok I have install OpManager and applied the lastest SP to it. I have the SQL back-end working properly. Now the problem is every device I try to add comes up as a desktop. I made sure that I have the right community string set and SNMP enabled on the devices I am trying to add. I have different comunity strings for certain devices and I have tried them all but they all come up as desktops. I have uninstalled it and reinstalled it but no luck it still want find the devices correctly. Also for the
Why the device can not be appeared!
I add an network 200.200.200.0/24 to search,in this network,there only have two devices,one is Cisco 2950 Switch,another is Cisco 2600 Router.twenty minutes elapse,I want to go to "Infrastructure Views>Routers" to see Cisco 2600 Router ,but there is empty,no icon of Cisco 2600 Router,then I go to "Infrastructure Views>Switches" to see,there has an icon of Cisco 2950 Switch, last, I go to "Network Views>200.200.200.0" to see,there is only one device icon which is Cisco 2950 Switch icon. So,I input
Cisco router configuration
We want to use OpManager to monitor routers provided by one of our vendors, and they prefer to limit the MIBS available via the "SNMP_SERVER VIEW" command in the router configuration. What are the minimum MIBS we will need enabled in order to discover the router and monitor the traffic stats on the interfaces? Thanks, Andrew Williams
One Alarm---->One Notification
Hello, im totally new in OPManager...we have installed it and our server sends notification when an Alarm occurs. But unless you cleared it, OPmanager sends further notification about the same alarm.....what can i do, to tell OPManager "please send only one notification for one alarm" i didn t like to have so much email messages in my postbox please help
NETWORK monitoring
i want to know the software by whome i can check the ystem information about hard disk.........RAm etc
Device Type
Hi all, I would like to add a device type to a group (server) and i can not find how to do ?! I select each server to attribute the device type but with 20 servers, it is a little bit long. Can you help me please ? tvmlminh
Device Type
Hi all, I would like to add a device type to a group (server) and i can not find how to do ?! I select each server to attribute the device type but with 20 servers, it is a little bit long. Could anyone help me please ? tvmlminh
Device Type
Hi all, I would like to add a device type to a group (server) and i can not find how to do ?! I select each server to attribute the device type but with 20 servers, it is a little bit long. Could anyone help me please ? tvmlminh
Set up server as SQL server to record SQL specific informati
Hi, I want to know how to set up a server which is running SQL to record information specific to the SQL e.g. in the MIB browser the MSSQL-MIB file -- the data located in here. I have attempted to record some data from a customer site before and have had the picture of the server showing the MSSQL label on it. but in the db data it doesnt appear to have recorded the SQL specific information such as db size, read write on db . mssqlsrvinfooutstandingreads and mssqlsrvinfooutstandingwrite as example
Monitoring uses a large amount of CPU on client
Hi, I am currently evaluation the product and have an issue with the amount of CPU usage required on the target domain controllers. Ever since we installed OpManager we have been getting frequent alarms due to the processor queue length thresholds being broken; currently set as the default of 7. Further investigation has led me to conclude that these alarms are occurring when OpManager is polling the domain controllers. OpManager seems to utilising 100% of the CPU for about 5 minutes every 15-20
Notification over port 25
I am evaluating the OpManager program. I am using McAfee enterprise which blocks port 25. I would like to know the process name that OpManager uses to send E-mails so I can put it in my allowed list.
SQL server 2005 express edition
Hi There i'm trying to migrate my opmanager database to SQL 2005 Express Edition. is this possible? everytime i run the "DBConfiguration" tool i get the message: "MSSQL Add on license is required to avail this feature". Any Ideas? Cheers CRaig
Notification to file
Hi, Is there any way to get opmanage to log the details of an alarm and save it as a text file on the disk, rather than sending out via email? If so, what command should be used?
https/ssl
Greetings, OpManagers! It's been a while since I've seen a post on this topic, so here goes. Can the web console be ssl enabled yet? As I recall, there were some Tomcat issues that were being worked on. BTW - Best forums ever ;-)
question about authentication in OpManager
Hello, We are continuing with our tests with OpManager which satisfy us. I would like to know if it's possible to connect to OpManager via Active Directory or LDAP like in HP Sim for instance. We would like to give to some people an access which is not defined in the OpManager database. The user has its local account DomainName\UserName and personalPassword and we would like that several specific persones access to OpManager with their own account. How can we do that please? I have another question
Probe works very slowly
Hi, We have a problem with the probe, it works very slowly. Machine properties of the probe; IBM 2,6 GHz 1 GB Java.exe = 95 % proces utilization Used memory (machine)= 326 MB There are approximately 500 devices Thanks, Emti
SNMP v3 Nortel
Hello, i'm testing a network with SNMP v3 routers, and not detect it. I detect SNMP v1 routers, but not SNMP v3. The routers with SNMP v3 are Nortel passwort 8100, 8300 and 8600 �Can you help me, please? My build is 6001
OPManager & Frame Relay
I'm using Opmanager and multiple Cisco routers connected to a frame relay network. How do I get Opmanager to recognize the sub-interface and PVC's
suddenly opmanager can't add email profile
hello , i have strange problem when i update any email profile it disappears !! then if i try to add any email profile , it gives me " successfully created" but i can't find it !!
Initial Discovery Not Correctly Identifying Devices
Devices are not correctly being identified during their initial discovery with our OpManager 6.0 install. The devices are showing up as as desktops. They are also not correctly identified after running "Rediscover now" on the device. The only way I can get the device to be correctly discovered as a router, switch, etc is by manually adding it. I specified our correct SNMP community string before configuring networks to discover. The correct SNMP community string also appears in the seed.file directory.
Business View Labels
Is there a way to turn off labels (eg. IP addresses, names, etc.) when creating business views? I created a business view using the default US map and started putting in my firewalls at my site locations. I have a lot of sites in one area of the country and all of the labels are just running on top of each other, making it look horrible. Is there a way to shut the labels off? Thanks
custom snmp monitor ?
hi, i just evaluate op-manager for my company. i want to query a fibre channel switch with an custom snmp-monitor. the uid's are: .1.3.6.1.4.1.1588.2.1.1.1.1.22.1 swSensorEnty .1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 swSendorIndex .1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 swSendorInfo .1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 swSendorValue swSendorInfo contains the type of the sensor (eg: .1 = Temp#1) and swValue the current value of the sensor (eg. .1 = 32) in deg celsius. in your post forums.adventnet.com/viewtopic.php?t=9439
MSP Probe - "Verifying connection with web server"
I have gone to a new installation (OK a reinstallation) on the central server and used port 443 as this server does not have SBS2003 on board. On a new site (where SBS2003 is installed) I have installed the MSP probe. I can get to the server from the remote probe site. When I reboot the server or run the programme I get: The splash screen with "Verifying connection with web server" and then it sits there. I have searched for the error on here and it seems to point at Linux problems rather than MS.
Data recorded from SQL server
Hello, What information is recorded into the opmanager db about an SQL server e.g. read, write, response times, db size, etc..? What are these data parameters called in the xml graph_info file. Thanks Andrew Welch
SMS notification format
Hi, Whwn i send a text notification, it is received with the header information, for example content-type: text/plain etc Is there any way to get opmanager to not send this information
Running opmanager Probe as an service Linux.
Hi, I'm planing to run fedora on our probes. but I cant get opmanager to run as an service. I have tried the following : http://www.adventnet.com/products/webnms/help/dms_guide/index.html And http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002634503&sid=c07b75fc94b4d62cc11bfbac85cdeb3a both of them runs fine if i start them manually in GUI mode in Xterm, but as soon as I try to start them in TEXT mode (Ctrl+Alt+F1) opmanager does not start. I have tried to
Not receiving any alerts
I had alerts setup for Opmanager but for some reason they are not being sent out. How do I add multiple emails to send alerts to? Also, under Mail Server setup, the email address that we list there, is that the one which forwards all of the email alerts??
Utilization
Is it possable to see total utilization for an interface as apose to TX & RX utilization?
CPU utilization for SMP server issues
Recently, I install OpManager (current newest version) for testing. It would work well for windows and single cpu for Linux system. But for SMP server running Linux, the CPU utilization get -1%, and memory alway over 95% (But the real utilization is only 45% around). WHat cause it? How to solve?
Custom Device Types into Correct Category
Hi It would be great for when I add a Custom Device Type I could then place that device in the correct Category. Eg, I have created a new device type for HP Procurve Wireless 420 Access Points. I know want it so when these devices are now discovered that they become Wireless Instead of the Default Desktop. Thanks Daniel Chapman
Opmanager CPU Utilization % always the same status
Hello, when i enable the CPU Utilization % for a server, i get always the same status. If i examine the Cpu Load on the machine i get the correct status. I use SNMP to monitor the CPU Utilization. If I use SSH i get the status -1. The server is a multi prozessor machine with 2 oder 4 Cpu's. Where is the failure ?
Delete and create new Infrastructure Views
subj How to delete any items on the Infrastructure Views? and create my items in the Infrastructure Views? Thnx!
MSSQL-Change of Server
Question, right now I have an opmanager running in w2003 server, with MSSQL database. And now, I must migrate opmanager to another server with same SO and same MSSQL database. How I can do this ?, to use de same database of the old server ?. Thanks for all. Diego
Custom monitor multiple instances in a custom report
Hello, We have a AKCP probe with its mib and a custom monitor in place. We have 8 instances of the temp for the 8 different probes. We can not query the DB certain times. We need to query the DB for a period of time where we were having problems. When viewing the graphs there is no extra box for changing the date/times to view. The custom report option in reports reports there is no data available. I'm pretty sure the data is there as OpManager will graph it for me but it won't allow me to query
Next Page