Collecting log data to view history not working.
Hey, I have migraded from MsSQL to MySQL using this guide: http://support.opmanager.com/sd/AddSolution.sd?solID=1204 Averything seems fine but the data collecting feature of opmanager. I can see current status and all alarms from the past but I can't see any information on when a specefic server is up and the aount of traffic flowing through a interface. See these picturures:
deleting Alarms
Hi when I try to delete alarms I get Failed to perform the operations for the following objects. Failure Object Reasons 1 IF_DISCARD_936 false But, the operation is successfully completed for the following objects. Failure Object 1 IF_UTIL_281 2 xxx.xxx.xxx.xx_Poll 3 IF_UTIL_800 4 IF_UTIL_309 5 IF_UTIL_310 6 IF_DISCARD_293 7 IF-172.16.1.9_Poll 8 IF_DISCARD_911 9 IF-172.16.1.2_Poll 10 IF-192.168.7.2_Poll 11 IF_UTIL_290 how do I correct this problem? Thank you Ramzi
Custom Infrastructure Views and Exchange monitoring
We have just upgraded to OpManager version 7, and I have to say that it is a great improvement over 6. Problem: When I create another Infrastructure View for mail servers, and I move an exchange server into that category, the exchange dashboard view disappears from the snapshot page for that server. This is a problem because we really want to use the infrastructure views to categorize our servers. Is there something I can do to enable this? It also seems to be the case with the MSSQL monitors.
Google maps
Hi, Finally the upgrade pack is here :-) For the moment I have two questions: 1. Is there some kind of manual to create the google maps within op manager? 2. If I have registered the wrong google map api key into op manager can I reset it? Regards Stefan
OPManager database problem
I ran repairDB.bat andd got following responnse: ============ myisamchk: MyISAM file ..\mysql\data\OpManagerDB\alert.MYI myisamchk: warning: 1 clients is using or hasn't closed the table properly myisamchk: MyISAM file ..\mysql\data\OpManagerDB\devicetoeventlogrulemap.MYI myisamchk: warning: 1 clients is using or hasn't closed the table properly myisamchk: MyISAM file ..\mysql\data\OpManagerDB\event.MYI myisamchk: warning: 1 clients is using or hasn't closed the table properly myisamchk: MyISAM file
Extreme Networks - No performance monitors
We have the following extreme networks equipment. Black Diamond 6808, Summit 400 and summit 450. All set to Vendor = Extreme, Category = Switch, Type = Extreme. When I look into the Monitors all I get is Drop Events Statistics SNMP Monitors the statistics of drop events Jabber Packets SNMP Monitors the Jabber packets Number of Fragments SNMP Monitors the number of fragments Oversize Packets SNMP Monitors the oversize packets Packets Received SNMP Monitors the interfaces packets received Packets to
Custom Monitor / Device Template problem
Hello all, maybe i understood something wrong, hopefully you can give me a hint: We have several Windows 2003 Server. All are Dell Servers. On One of this Servers there is a Lotus Domino Server installed, on others are other Systems running. Now we have a device Template for Windows 2003 Server. This Device Template does not hold the monitors for Lotus Domino (which is running on some of this servers, not all). If we create a Custom Device Template now for our needs in monitoring the Lotus Domino
Threshold can not be deleted ...
Hello all, How can i delete a threshold rule for a monitor at a special windows 2003 device? I tried deleting the values in the filed "Threshold Alert" and "Rearm value" and hit OK. After reopening the Threshold setting nothing seems to be changed, the old values are still set and it still says "violated". Regards Jenson
Changing default monitor times for CPU ect.
In version 6 I was able to change how often monitors like CPU, Interface traffic and memory were monitored. I do not see that in version 7. I had custom setup times for common resources and they did not get migrated over, where do I go to change them? Also I noticed that all the thresholding alerts that were setup for all my devices are no longer there, it looks like those did not get migrated over.
Custom (WMI) Resource Monitor
Hi, I'm currently on OpManager 6 and have a question about creating a custom resource monitor. I have a script that counts the size of certain folders and then returns this to opmanager (just like other scripts I have created in the past using WMI). My question is: what is the timeout value when calling a script for a custom monitor (by custom I mean one I have created myself by editing the appropriate XML files and writing a script.) The folder size command takes quite awhile to run and I think
Business view not show data
Hello i have one problems with business view the problem is that some images not show data and this damage report and not show devices,
Modem
We had installed a modem for testing, we have disconnected the modem now after which Opmanager is generating alerts. Please suggest how to stop this.
need 6.x upgrade for 6.x
i have version 6, build 6005 installed and i would like to know where i can find any minor updates, pre 7.0. thank you
Google maps
Hi I create an api key for my site , but when i try to submit the API key i get the notification that this site has allready an api key registered . I try to find a way to unregister the API but with no luck . Any ideas
customization of the alert of Interface Rx Errors
I am monitoring the Rx Errors on all my cisco interfaces, and I have alert with errors : ReceiveErrors , Instance = 67 : Current Value : 3 : Threshold value : 2 : Severity : Attention : Rearm Value: 0 Is it possible to customize the alert in order to have the friendly name of the snmp instance (like Fastethernet 0/0), instead of the snmp index falue (in this case 67
Custom report - All interfaces utilization
Hello, We have OpManager 6015 and the DB is in MSSQL. We need to generate one report for each bussines view of �All the interfaces utilization� so we need to add the �All interfaces by Rx utilization and all interfaces by Tx utilization� . We have been doing this manually, since we cannot export the reports to Excel we have been typing them and then, we add Rx utilization and Tx utilization. However we have been doing this everyday, and we really want to get the report "more automatic". So, we have
Google Maps Error :: No Infra Structure View found
I have added mu google API key, but when I click Google Maps I get the following error everytime: No Infra Structure View found with this name. Any ideas how this should work?
Reuse in OpManager 7 of custom monitor create in OpManager 6
hi, I would like to know if it's possible to reuse custom monitor create in Opmanager 6. When I try to associate a device to a former custom monitor, I didn't see it in the list. I see the olders custom monitors in the admin tab under monitoring but it is not possible to associate its to a device... Regards
Wrong ICON on AIX device
Would like to know why this happens when using the map maker on an AIX device and it shows up as a windows vista icons. Please see attachment. Thanks
Google Maps in v7?
I just took a quick spin through the demo of v7. I didn't see Google Maps integration...is that in there?
URL Monitors Not Working
I have added 5 url monitor all but 1 show the urls as down, even though all the urls are indeed up. In fact when I click the url in opmanager it pops up the site in a small popup and displays the site to me just fine. When I edit the url and click "CHECK NOW" the following is returned: The URL http://www.nationalgpsservices.com is down, Reason : Host Unavailable. So it thinks the host is unavailable even though I know the url is up. Any ideas?
Monitoring specific process for up/down status
I don't see how to configure opManager to monitor a specific process so an alarm can be generate when the process state changes from up to down. Service monitoring is straight forward but how do you monitor a process that isn't a service ? Jerry
Opmanager 7 and Content Keeper Devices
Hi Support, Great work with the new Vendor and Type listing, however I'm unable to find ContentKeeper devices. What's is the change of you adding them ?
Problem accessing DeviceExpert configs
I have entered and verified the login info for DeviceExpert under the Add-On icon but when I go to a device and try to look at the config all I get is the login page for DeviceExpert. I can click on the routing table info and it shows it but I cannot view the startup or running configs. Any ideas?
vendor
anyone know why the vendor for all my devices are coming back as unknown when i do s discovery. should it come back as dell hp etc....
Business Views Problems
I was delighted to see I can create and edit business views in the Web based Opmanager 7. However, there seem to be a few problems. a) Opening a map in the server based map editor seems to destroy the browser created version. Even when a save view is not triggered, this sometimes seems to occur. b) Links are so slim on the web version that it is almost impossible to reselect them to edit them. Once off the editor, the cloud containing the link information seems completely divorced from the link to
Opmanger 6 / 7 Password Requirements
Is there any way in version 6 to set password restrictions such as minimum number of characters and requiring use of a combination of upper/lower case numbers and/or special characters? For example a password like P@55w0rd? Do you offer a feature like this in V-7? Thanks.
Echoing of words in Russian encoding is Incorrect�
Hello When writing the name of equipment, its situating and comments to the OpManager 7 problems in Russian after the page refreshing instead of Russian letters there are question marks or numeric�character�set. Could you please help to solve this problem . The decision of purchasing OpManager is depend On its quickest� solving.
OpManager Free Edition Devices?
I am running the free edition of OpManager 6 and it manages up to 20 devices. If ugprading 6 to 7, it will only manage 10?
Issues scanning for Devices on Opmanager 7
I'm having issues scanning for devices, if I search for any more than 20 ip's I get a heap load of these errors in the event log and the next page to import the devices doesn't show up. After this I am not able to import any devices unless I do it by Add Device. Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7000 Date: 21/06/2007 Time: 14:58:40 User: N/A Computer: HELPDESK2 Description: The Netgroup Packet Filter service failed to start due to the following
URL monitor - random list order
When recreating all our monitors in version 7 (the upgrade from 6 was not available at the time) I specifically added the URL's in alphabetical order. The problem I found was that OpManager seemed to insert each URL in a random position in the list after I created it. This was EXTREMELY frustrating as it took many hours to create and test each of the URLs only to find they were "jumbled up" ! I need to be able to modify the list so that it is alphabetical. please advise how this can be done. Many
DBrepair - Failure CRITICAL ISSUE
I can't access OpManager and I get the ops run dbrepair message at the logon screen. I have done this and it has had no effect. We have just purchased the licence fee so this is very very annoying. I am unable to complete critical reports and if the tables are corrupt I would guess I am also losing data. I need to resolve this ASAP Mark
No Custom reports for business views
I would like to have a report that shows response times for ALL devices within a business view as well as availability, I have looked into the reports and custom reports and can't seem to find or create this? Regards mark
Sort the oder monitors are displayed in Device Snapshot
is it possible to sort the order the monitors for a device in snapshot view are displayed? We have several devices where we added new monitors after days and the newly added monitors belongs to other existing monitors but the new one is displayed at the end of the list.... Kind of sort-function would be nice... Regards Jenson
How to Configure Switches to raise an alarm
Hello all, if i add a switch to OpManager then after the first poll there is a alarm for that device, that several ports are down. That's true :-) This Ports are not connected anywhere up to now. Our goal is: We want to be alarmed as soon as a port changes it's connect-State. Right now there is always an alarm and if we clear the alarm after next poll it's there again. If i unmanage the ports we don't use today then i will never be informed by OpManager if someone connects a device to one of this
Importing MIBs for Barracuda Spam Firewall
Hi All, I have the attached MIBs from Barracuda Networks, this is not however in any importable format for OpManager. Does anyone know how to re-format this file or can tell me how to re-format so that I can then import it into OpManager? Regards, BlueFire
Configuring notification profile details OP 7
I've setup OP 7 and it seems to be working fine. Bit slower but fine. I've integrated OPManager & Service Desk so after OP Manager detects certain issues I want monitored it will autocreate a ticket for me to work on. The problem is I can't configure the profile details at all either when setting up the profile or after it's been created. I am receiving service desk tickets from OPManager - but they are not assigning to a tech or category which is what I really want. If I'm using IE 6 and try to
Opmanager 6 / 7
I know Opmanager supports SNMP I/II is there anyway to enable only II? Thanks.
Collecting log data to view history not working.
Hey, I have migraded from MsSQL to MySQL using this guide: http://support.opmanager.com/sd/AddSolution.sd?solID=1204 Averything seems fine but the data collecting feature of opmanager. I can see current status and all alarms from the past but I can't see any information on when a specefic server is up and the aount of traffic flowing through a interface. See these picturures:
/temp/NODATA after migradig from MsSQL to MySQL
Hi, I have a problem with OPmanager 7 (7004) I have migraded from a MsSQL to MySQL af descriped here (Follow the link in the post) http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002642451 Im using a new server with a new installation of Opmanager. I have not copied the folder users since only admin is used. I have not copied the folder conf since I want complete new and different configuration on the new server. All the servers and devices are now in my
Next Page