Moving OpManager to a new server
I just finished an evaluation of OpManager and now that I've purchased it, I want to move it to another server. Are there instructions for this? Can I use MS SQL?
Central Server Farm
Hi, Is it possible to setup a second Central Server on a different location for fault tolerence in case one is going down.
SNMP Error when SNMP Service starts.
Hi, after do all procedures to enable SNMP on Windows NT 4.0 SP6a, I'm getting an error when I try to start SNMP Service. The SNMP service starts but it does not working properly. The error is in the attached file.
Can I see my customer servers eventlog in MSP
Hi, Is it possible to see my customer servers eventlogs in Opmanager or do I need to logon to the server to see it?
read-only users remove ping rediscover traceroute
Is there a way to remove ping, rediscover, traceroute, and show routing tables from users that have read-only access to a business view?
What ports to open on remote sites ?
Hi All, I'm a newbe for opmanager so I hope this isn't a silly question. We are using opmanager (MSP build 6005) for monitoring the networks of our customers. Although we are not using the software at it's full power (we just don't have the time to do everything at once) we are very happy with the software. Now for letting the probe do it's full functionality (using inventory and security) we have to open many ports on the firewall. (that is: as far as we know). We wouldn't want to open that many
FILE NTHR-MIB NOT FOUND
Where are the file NTHR-MIB referenced on Configuring SNMP agent in Windows NT Systems?? My NT Server is not working fine without this support.
SNMP monitor that does not do deltas?
Hi, I have tried to create a custom monitor for "memory used" on a BIGIP. Both add monitor via mib browser and add bulk delta the values. I need a gauge type.
switch port mapper
Hi all, Iamb a newbie to opmanager so please forgive my ignorance. Iamb trying to get switch port mapper working on one of my switches but cant figure out how to set it up on the switch. I have a linksys SRI248GA4HP with gu. Every time i try and use switch port mapper it comes up saying that "Data not available. Please check device availability and SNMP parameters." Does anyone have any suggestions?
Windows 2003 Server Occassionally Drops
Hey...i've got one server that for the second time now just quits talking via SNMP to OpManager. I'm using the same settings as I am for the other Windows servers... today I went in and all of the info was greyed out in the server status screen. test the credentials, and it fails. got into windows, check the SNMP service and everything seems fine, however OpManager will not talk. I'm running OpManager on a Windows 2000 server using the lastest build. the server is a one year old Dell server (poweredge)
Query Unmanaged Devices
Hello, I am in need of assistance in regards to pulling data from the MySQL database. I need to pull the devices that are on maintenance, the common name of the device, and when they went into maintenance. This query will go into a daily email script. Looking at the table "elementsonmaintenance" is only slightly helpful, as I am having difficulty matching the two columns within to the rest of the database... Thanks in advance!
Selected Service Monitors down but no notification
Hi Support, I am monitoring some services and under the notification profile, I have selected only a few of these services to trigger email alert. When the selected services were down, there is no email notification sent but alarm was generated in opmanager. I can see the 'alarmCode in checkAndNotify SERVICE-DOWN' recorded in the log but there is no 'Send Email Notification' entries in the log However, the email notification will be sent if I select ALL the services under the notification profile.
No Data available error for CPU, Memory and Disk IO-hP Serve
Hi, We are setting up OpManager 7. And successfully configured solaris and windows clients. However, for HP-UX servers, unable to get the CPU, Memory and Disk IO graphs. Getting "No data available" error. We want these details using SNMP and not using CLI. Please advise. Thanks in advance Reks
Todays availability is always 100% uptime
Hi, All our servers for different customers have the same uptime which is always 100% even though we have tried to shutdown some of the servers just to see the effect, they also have the exact same uptime.
Problems monitors WMI
I use the OpManager to one 6 months. Today I perceived an error when trying to add WMI monitors. Error: Exception occured in savePolledData api. Somebody knows as to solve this problem?
No Graphs on Interface Details and Templates for D-Link
Hi all for testing i installed the ne version of OPManager. Its a very great Tool. My Problem is, that i see no Graph-Pics on some diffrent Network Interface Graphs. The Strange Thing is, that SNMP recive some Datas from the Server. Also OPManager got the Trafic details but cant create no Graphics. Iam also looking for a Template to integrate my D-Link Switches and Access-Points. Is there a way to Download this?
TCP/UDP ports needed for snmp
I have a firewall between my snmp server, opmanager, and HP server. I would like to know what ports need to be opned on my firewall. I know TCP/UDP port 162 is needed.
Error uploading MIB
Hello, I am trying to upload a MIB to manage a Raritan KVM. When I try to parse it, I get the following error: Error parsing MIB:SX-MIB.my Exception while loading MIB:Could not parse the file C:/PROGRA~1/ADVENT~1/ME/OPMANA~1/./mibs/SX-MIB.my The error occured at the line no: 47 ,column: 9. For the table and row OBJECT-TYPE construct the ACCESS value should be 'not-accessible'. For other constructs the ACCESS should contain one of these values : "read-create , not-implemented , accessible-for-notify
Reports
Hi, I am using OpManager build 7024. I would like to know if I can generate a single report for selected routers interfaces showing the TX/RX traffic over a period of time. It seems the only option I have is to select the interface from the device snapshot and print its statistics. That way I am ending up have multiple reports and I have to do this every day as I can not have them scheduled to run automatically everyday or so. Thank you Ramzi
Problem with Performace Graph
Hello We set the parameter for detailed statistics to 15 days. Today (28.01.08) we check the Traffic Utilization of a WAN line for the 14.01.08 and the error is : Sorry, no data found for the selected period. From my point of view we should still have data for the 14.01.08 I tested this with another WAN line and there is the same error. Best regards Roberto
Monitor Hard Disk Failures on Hardware Controller Card?
How can I Monitor Hard Disk Failures on a Hardware Controller Card as they are not reported in Windows Disk Management or Event Viewer?! Our server are HP ProLiant ML370's and use RAID1 and RAID5 on a hardware controller card therefore not managed by Windows! Any help would be greatly appreciated. Matt
Problems monitoring some Servers.
Hello, I am facing some problems when I try to monitor tree of my servers. The process to do this was exactly the same to all the other servers I have added before, with no problems. I add a new device (ex:10.2.220.30), the device is added, but without service or performance monitors. Heaven when I manually give the Vendor (Microsoft), Category (Server) and Type (Windows 2003), the performance monitors appear but they don�t work. I have SNMP and WMI enabled on those machines, tried already with the
Automatic Report Generating
Hello In OpManager 7, is there a way to automatically generate reports, on scheduled times? And is there a way to export reports to another format than pdf? (for example excel? ) Thanks for your Help
[MSP6003] Java.exe on probe memory leak
Right now we are facing are very very serious problem with our MSP 6003 probes. On all of our probes java.exe is causing high memory utilization. We have to restart the Opmanager probes on a hourly base right now, this is very time-consuming and that's ofcourse costs money!!
Rename MSP Forum to Opmanager MSP
Is it possible for you guys to rename the MSP forum to OpManager MSP so it will get more hits.
Opmanager MSP new version
When can we expect you to release an upgrade for the MSP version, earlier you said January 2008 but time is running out?
MPS 7 - Coming????
Hello, you spoke about having the version MSP 7 in January. Can we have an estimated concrete week for that? we would like to introduce that because we hope to find more devices (included netgear switches) so we can try to manage them without spending a lot of time with custom mib. Let us know Please
Netgear smart Switches support (gs700t and gs700ts)
Hello, can we have included in the new opmanager msp the netgear smartswitch suite? we have a lot of netgear switches and could be fine to support them. I have attached here the complete mib list I received with the netgear gs700 TS series. Let me know if this can be done
Adding text to a business view
Is there a way I can add text to a business view? For example, I have my devices setup (and organized) exactly the way I want them, I'd like to add text to the view so I can label/describe them further. Thanks.
The importance to be enterprise for adventnet
Dear all, I would like to see from a company providing some products public roadmap. I think is not exactly "enterprise oriented" just promise release of software on a forum without giving exact structure of next version, release and bug fixing. We use some of your producfts for business and a normal approach is to take decisions based on avaialbility of solutions. I have seen the roadmap.adventnet.com but here is only a place to put our ideas and nothing else. I have seen promises abou the MSP Opmanager
limit of managed nodes for free OpManager 7
Hi I recently upgrade Opmanager 6 to 7th version. Version 6 of opmanager was released free for up to 20 managed nodes while ver. 7 is released free for up to 10 nodes. Since I have to deal with up to a dozen of nodes I was warried to do such an upgrade but I noticed that the system kept on managing all my nodes even after the upgrade. Now... if I ever should reinstall from scratch on another manager server the latest version of OpManager, is there a way to continue using the free license (to manage
Threshold for the MSExchange.
Hello, I'm implementing the threshold for the MSExchange and I have a problem for define the threshold. I would use a pertinent value. Where can I find this information? Thanks, Pierre-Yves
can't add new device
I use Opmenager Pro Build 7024 but i can't add new device have error in pic thank you
Fine Tuning Queries
I'd like to know how to... - Change the text used in Alarm messages or create custom alarm templates so we can have more useful text in them, - Re-order the interfaces for a router so that one the initial router screen, where only a couple of interfaces are shown, we can see the most important/relevant interfaces. Cheers Dan
Cannot reinstall OpManager7
I am reinstalling OPmanager 7 on windows 2003 server, but Opmanager shuts down gracefully Error The specified Service does not exist as an installed service I like this prodcut and i want evaluate this product fully
Properties for new Infrastructure-view Opmanager V7
When creating a new Infrastructure-view, standard settings are made for the view. It is not possible to choose some of the SNMP-monitors for desktops in the new view. Is it possible to make a new view with the same properties as the Desktop-view, if You wish to Group teh desktops in different views?
Partition details history
When i make a report from a server with detailed partition information i get only information from the last 15 days. In version 6 this was not a problem.
Time.jar
Good afternoon to all! Staff, necessary of the archive to time.jar to be able to synchronize the hour of the together OpManager with the hour of the server, somebody knows I where can obtain? Very Obliged!
"No Infra Structure View found with this name" -&g
Any Help or manual for the new Google Map Functionality available? I see a Link "Add to Google Map" in Device-View. If i follow this link the Information "No Infra Structure View found with this name" is displayed. Also if i click the BusinessView "Google Maps" this Message is displayed. Jenson
oracle support in opmanger or application manager
dear ladies and gentlemen, i am looking for information about the support of oracle databases in opmanager. i have to mention that i'm a student from austria and in one of my current projects i have to look for a monitoring solution for a certain company. out of a couple of possible tools they chose opmanager which they really want to have within their company. the problem is now, that they want to know if there is a support for oracle and if yes, to which extent. so i would be really happy if you
Next Page