Can we set a differnt ping and snmp collection interval?
There are situations where we want to ping certain devices rather quickly (1-2 minute) so we will know right away if it becomes unreachable...BUT we don't always need all the snmp info gather at the same interval and would like to only get that information every 10 minutes. Can we set the ping to have a different polling time then all the interface/cpu/memory/etc information? Thanks, -Wayne
OpManager vs. Orion
I am looking for a comparison document of OpManager v's Orion. I hear there is one out there somewhere This would save me a lot of time and hassle and allow me to provide a better business case for implementing OpManager. We already use ServiceDesk and are extremely satisfied. OpManager and Oputils will be a complement to an already powerful suite of tools. If anyone has this, please could they forward to harry.danger@yahoo.co.uk. very very much appreciated...
Trouble loading a DELL-DS2-MIB into OpManager 8050
Hi I'm having trouble loading a dell console switch mib into OpManager 8050 as it appears to be missing a construct definition, but I have no idea which MIB would define the OctetString construct. Any help would be greatly apprecaited. Thank you rob
OPmanager Iphone page refresh
Is there a way to have automatic refresh on the OPmanager browser for Iphone?
Upgraded to 8050, now issues
Once I upgraded to 8050 things started going wrong. Among other issues, it appears that now the "Server Availability Distribution" is all over the map. Look at the times at the top of the chart that is attached. Any help would be greatly appreciated.
Error! Displayed in Alarm Escalation
I've e-mailed OpManager support twice about this but had no reply... I was adding a new rule within Alarm Escalation but included a space. I was shown an error telling me to remove special characters, which I did so. On then trying to save the escalation rule a page simply displaying "Error!" was shown. Now this is all I see when I click on Alarm Escalation. What can I do to fix this? Thanks
Switchports and alerts
I have several Cisco access switches that are monitored by Opmanager. Every time a user unplugs their laptop or it gets shut off we get an alert. This is not optimal as we get hundereds of alerts a day. I have read the forums and the solution has been to unmanage the ports. I do not want to do this since I want to continue to gather performance statistics on these ports. I have seen the ability to change the criticality of certain interface rules but I dont want to change the rules for interfaces
URGENT : Change threshold in AD add-on already applied
Hello, I would like to change and actovate threshold in AD add-on, I have 41 DCs and I cannot find a way to modifiy globally threshold and if I go in each snapshot and i try to modify thrshold, all options are in gray and canot be changed. Can you please, provide how I can change them. Regards philippe
How to backup OpManager 8050?
How to backup OpManager 8050?
Generating an alert
Is it possible to generate an alert from an incoming email to a predefined mailbox ...?
Migrate from 32 to x32_64 arch... Opmanger.
Hill to all! I have a new x86_64 server,my old server with Opmanager is 32 bit. How i can migrate to Opmanager 64 from 32bit ???
Service Down notifications
We often get false alarms for service down. Alerts for device down can be modified to only alert after 3 bad responses. It would be extremely helpful to have this same functionality available for service monitors. Has anyone found a way (supported or not) to accomplish this?
Server restart based on a exceded threshold
Hi, I'm monitoring our servers using OP-Manager - latest build. One of the monitors is getting the temperature of the CPU or ambiental temperature. Apart the Email and SMS notification I would like that the server is being shutdown when this alarm is triggered. Do you have a best practice in this direction? Thanks and Regards, Razvan Despa
Blackberry Curve 8520 and OpManager build 8050
Hi, I have OpManager build 8050. I tried to connect to it using the Blackberry web browser but, after some time, it says "connection timed out". I am using the LAN IP address of the server and I am connected to the LAN using the WiFi. Does anybody have the same issue? How I can fix it? Thanks, Roberto D.
ports....
opmanager is using which prot, i mean to say that its using 9996 port right!! TCP or UDP to allow in my firewall??
What is the definition of these severity levels in OpManager
Hi All, Re: OpManager I have look through the documentation and cannot see this anywhere but what is the definition associated to each of the alarm severity levels? The levels I know about are .... Critical - ? Trouble - A threshold or limit has been exceeded which could indicate an issue. Information purposes only at this stage unless a manual review deems it appropriate to action [This is my definition]. Attention - ? Service Down – The service being monitored is offline and cannot be accessed.
Problem in opening ManageEngine OpManager Console
Hi All, Problem Reported è I’m not able to open the Opmanager Console after I closed the Opmanager Console Tab. è On opening the Opmanager Console it’s prompting me to enter the license key even though I’m using the Evaluation version. Evaluation version was used for only 3 days. (Evaluation Period – 30 Days) Server Configurations è OS – Windows XP with SP2 è Browser Used – IE 8.0 è OpManager Edition – Professional è OpManager Build Version – 8050 Steps Performed to Solve the Problem è Restored
new interface
Hi all New to Op Manager so forgive any stupidity How can I add a new interface to a device template? I have been able to create a custom monitor from an imported MIB file, but I want to show it as an interface along with the other interfaces that are discovered for the device. Thanks
Adding custom WMI monitor does not work
Hovering over the WMI perfomance counter shows me the current raw value from the exchange server, however when I add the monitor and try to test it, I get The Monitor did not respond to the test request. The specific monitor in question is the PhysicalDisk.AvgDisksecPerRead (any instance). Is this due to the fact that it is a 2008 server. Has anyone gotten this working? Thanks. Rob
Device notification profile time window monitoring
Hello, I have a problem with Opmanager 8 build 8050. When I try to make a new Notification Profile Rule in a device (Add Profile > Select a Notification Profile > Define Criteria > Apply this profile during the below mentioned time window), I define From 18:00 To: 8:00 all days, but this rule does't work. Alerts are not send by mail ! I think that the problem is because the window exceeds 23:59.If this is true, how can I do otherwise? Downtime Scheduler is not ideal for me because between 8:00 to
Cisco MIBs- how to load?
Hi, I am trying to figure out Cisco's MIB files. They are names with an extension ".my", and they don't look like standard MIBS. I tried to upload one of them to Opmanager but I get an invalid MIB error. Here is an example- I want to load MIBs for my 4402 Wireless Lan Controller, and this is their list of MIBs for it: ftp://ftp-sj.cisco.com/pub/mibs/supportlists/wlc/wlc-supportlist.html Are these regular MIBs that OpManager can import? Do I need to modify them? Also here is a list of all their other
Problems adding Wan RTT monitors
Hi. I'm triying to add some Wan RTT monitos but i can't, I dont have any message apart from "Error!", no error codes or anything. I've checked the snmp and telnet access to our router and works fine, is not a credential problem and I've been able to add wan RTT monitors before without any problems. Any clues?. I'm using OpManager Pro 8050 over windows 2003 server, the router is a L3 switch (cisco catalyst 3560). Regards.
How to enable SSL in Build 8050
This KB mentions there will be a new article for 8050, is this out yet? http://support.opmanager.com/sd/AddSolution.sd?solID=22801 "Note: From build 8050 onwards, apache is removed and the steps to use SSL will be different from this one. It will be updated as a new KB article soon." Thanks.
Custom WMI Scripts in build 8025
Are custom WMI scripts possible with build 8025? I've tried an example that was listed in another discussion but it doesn't show up in the GUI.
Error in interfaces
Hi, Update OpManager to build 8050 and the block interfaces have such report "No interfaces are there for this device." I did rediscovery, but nothing helped. And so on all routers
How migrate OpManager Linux to Windows
I want migrate OpManager from Linux to Windows. Need only to backup the MySql and make the restore in Windows? I can migrate to SQL Server?
credentials for asa 5500 series
I can't get the firewall to recognize the credentials im using for the firewall. I select ssh type in the username and password and hit test credentails and it fails. i know i'm using the correct credntials.
ESX Monitoring configuration
Hello Everyone, Can someone provide a document on how to configure SNMP on an ESX server as well as how to configure OpManager to monitor an ESX server? Should I also configure CLI credentials for monitoring ESX servers? Thank you
JMX remote monitoring
Hi, I was trying to configure to monitor Java runtime and i failed, Herewith i have attached the screen shot for more info. I checked both in windows and linux with following config, but i was not able to configure. set CATALINA_OPTS=-Dcom.sun.management.jmxremote.port=7009 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false CATALINA_OPTS="$CATALINA_OPTS-Dcom.sun.management.jmxremote.port=7009 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false"
MIB and OID Acronyms
Here's an easy question...what does MIB and OID stand for? I've been looking in the user guide but can't find the definitions. Thanks, Frank
Event Viewer
Dear all, I want to know if it's possible to monitor other event log. For example, Safeword application create new event log and I would like to monitor this Event log. Could you help me please, Best regards,
Errors Rate in Interface Templates
Hi, I am monitoring some routers and in the interface templates I have setup thresholds value for errros and discards at 5.0 % and rearm value at 4% for both. The ocurence it is setup at 3 times consecitively. Whe I go in the dashboard of an interface on the right side i see a graphic with errors and discards. There I can see the errors in and out, discard in and out. On the graphic these are as a number 10, 12, 64, etc. (picture ENP-6726.jpg). If from the dashboard of the interface I click on the
Link to businessview from intranet-website
Hi all, we would like to link to a businessview from our intranet-website without the need of having the intranet-user to authorize to OPManager (eg. anonymous access). Do you have any tips on how to accomplish that? Thanks Dirk
Email alerts
Now we have one more person who will take care of all devices if memory level shoots above threshold. I have many devices i don't want to add this guys email id going to each and every device and adding his email in notification profile Any quicker way i already have network map for this company. i can assign all attention related assign to this person for all device in network map for this company but are memory threshold only attention alert? i don't think so help!
IPSLA
Hi, I am in the process of setting up a number of WAN RTT monitor. Can you advise what the config is that is sent to the routers also what is the impact on the router if any? Is it advisable to have for example 1 router with 10 different destinations with each destination route having a RTT monitor on it? Cheers in advance. RH
OpManager 7 will not start new install w/ logs
Hello, I cannot get OPManager to start. This is a new install of v7. I was looking through the logs on the server, and it was referencing an active network connection that we do not use for "normal" traffic. Is there a way to specify what network adapter it uses? Any help would be appriciated!!!! Thank you Mike errors in the stderr6.txt and wrapper are: PM (OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. : make_sock: could not bind to address
New to Manageengine
Hi, I am new to Manageengine, I am not sure what fits in my requirement hence i am seeking some clarification, we have different platform available like Unix, Linux, Windows, different database system MSSql 2005, Oracle, loadbalancers, firewall we would like to monitor all the above stated system. I am not sure whether Manageengine OPManager can do all, do i have to go for application manager separately? If you could clarify it would be helpful. Thanks Hardeep
can not input a Network Range for Discover
Hello everybody, i have install V7 of OPManager on a Windows XP Prof. system. The Gui works fine without any problems. Now i discover the network and use the follow values. ip range: 10.177.96.1 - 10.177.96.254 i have choose any network mask but the message: Please enter a valid number. BTW: i cant change the network address/mask in my network. thanks and regards dbase
Adding router takes a long period. What should i check?
Adding a new Cisco 2850 router device takes a lot of time! I am using Linux version of OpManager. How can I troubleshoot this issue? Is it anywhere log of adding devices? Can i add devices using CLI at Linux?
8050 Issues
Hi since my upgrade to 8050 i have major issues end everytime i solve one with support i discover a new mulfunction. and support requests seem to take forever to be assigned. Right now i have issues with. 1. Business views with 400 members that cannot be edited (newly created or old ones) 2. alerts that do not clear 3. False WMI credential errors "Permission denied-Verify WMI credential" that are also not cleared 4. New bussiness view with few members that can be edited but dashboards do not
Next Page