Connected Nokia 6120 classic to send out SMS Alerts - sending alerts but receiving mobile cannot open message
Hello, We have the latest version of OpManager running. We recently rebuilt the monitoring server to Windows server 2008 R2 and our Wavecom modem is no longer supported on this OS. So we attached a Nokia 6120 Classic via USB to the server on COM6. OpManager picks it up and sends out alerts however the receiving phone (also a Nokia 6120) cannot read the sms, gets the error "Unable to open. Message format not supported." Does anyone know how to make this work? Thanks.
OpManager and ESXi
I've got an installation with 12 ESXi hosts monitored with the latest build of OpManager. One og my ESXi hosts doesn't update the storage area, telling me that some storage LUN's are out of diskspace when they are not. How can I make OpManager to show or update the actual disk usage? Regards Kaspar Brygger Rambøll Informatik A/S
thinclients
is it possible to add a thinclient like a Wyse R50l to Opmanager ?
The device can't be displayed in maps-category-map
Hi: I meet a problem in Maps-Category, I have added 14 printers in printers category, but when I click maps-category-printer, in map page, I can only see 9 device in that page, however, when I switch to list page, all 14 device can be see, I have upload the 2 pages as attached files, the OpManager version is 8271, many thanks!
Multiple Event Log ID's to 1 Rule
Is it possible to create a single Event Log Rule in OpManager for multiple Event ID's (like you can with EventLog Analyzer?) For example I want 2 rules: 1 for non-standard Logon failures (530,531,532,533,535,536,537,539,627,644,4625) and 1 for std Logon Failures (529) Or do I have to create a seperate rule for each event ID?
Feature request for folder monitoring
We have a requirement to monitor a folder which processes files in batches. A remote process/server delivers files to this folder to be analysed and processed. We need to know if it's processing OK. Unfortunately, file count monitoring can't be used as we don't know how many files will be dropped in at any time, or when they will arrive. What we would like, if possible is to monitor the last modified date (age) of the oldest file in the folder and alert if it does not change between a specified poll
Juniper SRX240 Monitoring
Hi There, I am having issues with monitoring a Juniper SRX240. There does not seem to be a device template for the device. Can anyone provide any information on how to get this to working. SNMP has been enabled on the device
How to remove device categories from Maps in Opmanager
I would really like to be able to remove device categories that we do not use in OpManager, anyone know how I can go about doing this? Thanks, Phil
Issue with VMWARE ESXi 4.1
Just a few days ago we migrated to new VMware. We took this opportunity to scale some of our monitoring machines into the virtual environement. After building a new Win 2008 x64 virtual machine and loading OpManager 8722 I cannot discover or monitor our VMware Hosts. We have tried several options but the vendor, category never recognizes as vmware. And I also do not see VMWare in the type which I am positive we had in the previous build, which recognized our hosts without issue. All of our credentials
Errors from removed ports?
We are running the latest version of OpManager Professional (Build 8722 ) We have a number of network switches that are monitored. Our requirement is to only monitor uplinks and not all switch ports as this creates a nightmare of alarms to manage(a user unplugging his laptop generates an alarm?). Once the switches have been added to OpM we manually remove all monitored ports so that only the uplink ports remain for monitoring. However, even though the ports are not listed anymore, I still receive
Monitoring SRX 100 Junipers routers
I monitor Juniper routers (Model: SRX100), when I enter to the detailed view for the device I cannot see CPU Util/Mem Util/ Assoc. MU graphs. I used the MIB browser utility to load the MIB: mib-jnx-chassis.txt (Object ID:.1.3.6.1.4.1.2636.3) and it was to applied over Juniper SRX 100 device and it respond ok for SNMP GET query. Now pls note, that when i configured some monitor ( for exmple CPU load-PIC: 8x FE Base PIC @ 0/0/* ) and i wish to test the Monitor always appears the monitor didn't response (Threshold
OpManager in sub directory
Is it possible to move the OpManager URL to a sub directory - i.e. instead of http://localhost/ it becomes http://localhost/OpManager/ Thanks, Ant
Is default view for the device based on the host-resources mib?
I monitor several wireless controlers (Motorola WS5100) and when I enter to the detailed view for the device I cannot see CPU Util/Mem Util/ Assoc. MU graphs, so I believe my devices don't respond for this SNMP query. I checked it - I Loaded host-resources MIB to external snmp manager and tested my device - only memory utilization gave me a good respond. The strange thing is that when I add performance monitor (memory util.) (from host-resources monitors)to my wireless switch there's still no graph
[Feature request] Remote server management
It would be great to have IPMI support in OpManager. Not only MONITORING, but hardware control too. Ability to reboot, power on and off by events. And as extension to this feature request -- ability to assign management interface to server. For example -- server has primary IP 192.168.1.1, and IPMI Remote Management interface (iLo in HP case) IP 192.168.254.1
Add Disk(%) in LIST VIEW
In the list view, can we add Disk(%) like CPU(%), Memory(%). Thanks Alagar E K Kanoo +973-39739057
Glance Command for HP UX
Hi OPM Team We faced this issue with one of our customers site. They are monitoring a few HP UX servers, which are constantly giving 99% memory usage, whereas, if they use this Glance command , it gives 84% or so. This is happening in most of the systems. We know, we can modify the file and change the command to our customers output, but is it possible to use this Glance command. please check this command output and OpManager output Thanks Gopi ME Tech
disk space usage
Hi Helpdesk I started the monitoring a disk space usage on a machine which is running on Win 2008 server. Is it possible to setup a disk space monitor with alert? E.g: I have C and D drive and I would like to get the alert when the D drive usage is higher than 80 %. Thanks Joe
Digi CM Console Server
Hi. I got 2 equipments called Digi CM with 32 serial and 1 ethernet ports. I uploaded the mib file and got all the information about them at the mib browser page. But when I add the device, the only interface that is showed up is the ethernet one. I must monitor the traffic at their serial ports. How can I do this? Anyone could help me? Thanks. Antonio. http://www.digi.com/products/consoleservers/digicm.jsp#overview
WMI script
Hi, is it possible for OpManager to run a script like this on a remote windows server: wmic bios get serialnumber This can let me have the Windows serial numbers and may be report them. Thanks, Roberto D.
Monitoring Virtual Machines on ESX
We are monitoring ESX Servers. In the "Inventory details" of the snapshot of each server, the virtual machines panel, appears empty. ¿Is it normal?. The ESX servers hosted a lot of virtual machines, and in the tab "Resource Allocation" appears all.
Monitoring ESX
I dropped, by error, a virtual machine that existed. The machine appears on the ESX, but the snapshot of the virtual machine, isnt exists. When I try to discover it again pushing the Rediscover button of the ESX, the link of the virtual machine appears "disabled". How can i discover the virtual machine again?
How to configure a specific trap processor to clear the view of a message
I have a question about trap processor. I manage several Wireless Switch Controllers (Motorola WS5100) and I recieve traps generated by these devices. In most cases I was able to appropriate configure sent trap messages to make an e-mail notification clear and readable. but when i get messages like this I cound't config trap process. in right way: wsTrapWirelessRadioAdopted is received from 172.29.9.2 with the following related information : sysUpTime.0: 169 days, 23 hours, 39 minutes, 0 seconds.
Two Question about DBConfiguration with MSSQL
Hi, How can I configure the field's host DB when my DB Server has a Instance? Ex: DB Host: nameserver Instance: APP Database: Opmanager I created manually the database for Opmanager on MSSQL and I created a new user with dbowner privileges for security reasons. Is it a Problem or I must use the sa user? Thanks, Thiago Morais
SNMP v3
None of the SNMP v3 credentials that I have set up work? Though other tools are using the same credentials and work. Any ideas?
Copy Virtual Devices view
Hello I have tree separate VMware SANs with lots of hosts and VM-machines. It would be very nice if I could create copies of the Virtual Devices view to separate each san. Can I do that? //Peter
OpManager integrate to AD?
Hi Team, Can we integrate OpManager to corporate Active Directory? Regards, RK Kit Digital
Juniper SRX, CPU, Memory and Connection Count dials
Hi, I'm trying to make opmanager work with Juniper SRX firewall, and i managed to get some Performance Monitors Working but wasn't able to find a way of making the CPU, Memory and Connection Count dials to show the values that the monitor gets from the firewall. What am i missing here? Best Regards
Device Gauges
How can I change the OID that a gauge is looking at for a particular set of devices? Namely 3Com switches, which I can get a CPU Utilization for in the performance monitors, however can't get it to display in the gauge. Ant
How do you alert on response time of server
I have a router being monitored and the ping response can not be greater than 80 ms. I see the response time on the server tab, but can not figure out how to alert off of it
HP proliant HDD failure monitor
Can some one share how HP proliant Harddisk failure can be monitored in Opmanager
how to rename Infrastructure Views?
can help me please....
Business View background
I would like to know if is possible to add new background image on Business View. I've just to add an image to \OpManager\images\maps directory, or i must produce particullary image size or format? Thank's in advance.
URL Monitoring not working
I've been trying all sorts of random sites in URL monitoring and no matter what I put in there, I keep getting the "... is down, Reason : Host Unavailable" message. When indeed the website is up and running perfectly fine in a browser. I'm using GET and matching content.
Trying to add a new server to OpManager
Hello, I'm trying to add a new server to OpManager and getting the following error: Some stray entries found for this device I know for sure that it is not in OpManager. Can someone help?
OpManager Problem
Dears, i am facing a serios issue with the OpManager, all the icons are not normal, and the font of texts have also become big, can anyone give me any ideas to troubleshoot this issue it would be gratful for him/her. thanks Sohail
Device details for printer
Is there a way to alter the device details or snapshot page to show the total pages count for a printer. I have the total pages printed as a monitor but would like to show it on the snapshot or details page. Is this possible?
Printer total page count?
I am trying to track total pages printed on each printer. Is this OID in the supplied printer MiB? If so, which one is it? Thanks in advance. Seth
Decimal SNMP
I'm using an OP to monitor SNMP device that tells the temperature of the environment in real catch up. The value returned by the device is in numeric format temp * 10. To get the converted value applied the formula: (oid) / 10, but returns the value after the comma, like this: 271 is equal to 27 and 279 is also 27. You can now return the value with the decimal or approximate? 271 = 27.1 or 27 279 = 27.9 or 28 Thanks
How to create reports on syslog files.
I have a sonicwall firewall that I have setup for snmp and also have syslogging setup. I have added the firewall in to your software and I have also pointed syslogging to OpManager as well. I can see the syslog entries but have no idea how to query these results or create reports from them. What I really want to be able to do is list network utilization base on source IP address. That way I can figure out who in my office is using large amounts of data. Can this be done using either of the methods
Unable to poll devices from SNMP .
We are Facing an issue of polling devices through SNMP string from yesterday onwards. Port we have tried changing the PORT ffrom 162 to 151 , it initially starts from some time and again stops polling. Regards, Aditya
Next Page