How to configure a specific trap processor to clear the view of a message

I have a question about trap processor. I manage several Wireless Switch Controllers (Motorola WS5100) and I recieve traps generated by these devices. In most cases I was able to appropriate configure sent trap messages to make an e-mail notification clear and readable. but when i get messages like this I cound't config trap process. in right way:

wsTrapWirelessRadioAdopted is received from 172.29.9.2 with the following related information : sysUpTime.0: 169 days, 23 hours, 39 minutes, 0 seconds. , snmpTrapOID.0: .1.3.6.1.4.1.388.14.5.1.7.2.4 , wsTrapWirelessRadioName: 11a(Index:7) H6_AP46 , wsTrapWirelessAPMac: pOIh , wsTrapWirelessAPIpAddress: 172.17.0.223 , .1.3.6.1.4.1.388.14.4.1.4.1.1.1: 171611 , .1.3.6.1.4.1.388.14.4.1.4.1.1.2: normal , .1.3.6.1.4.1.388.14.4.1.4.1.1.4: adopted , .1.3.6.1.4.1.388.14.4.1.4.1.1.5: ?
, .1.3.6.1.4.1.388.14.4.1.4.1.1.8: unacknowledged ,
This trap is sent on my e-mail when an Access Port has been adopted or unadopted from the Wireless Controller.

So question is:
how to set up the trap proccessor to get only information about source (trap was recieved from 172.29.9.2) and the name of an AP (in this example: H6_AP46)

Thank you for your help.