Analog Modem on Opmanager
I have connected an analog modem on my Opmanager Server. With Windows I can connect to the modem and test it with no problems. Opmanager however keeps saying: Modem is not connected properly. Check your settings! Any ideas what i am doing wrong ?
Test Throughput between 2 end nodes
Hi everybody, I want to know if OPmanager is able to test the throughput between 2 End points and if so , how this can be done Thanks AZ
[OPManager] SUN Solaris component tempertures and RAID monitoring
Hi there, Need some help in configuring temperatures and RAID monitoring for Solaris servers and also our Dell PowerEdge 2950 servers. I tried working with the templates provided but couldnt get anywhere and I am not sure if we have the MIBs needed for it on SNMP. I am also trying with the telnet/ssh login creds for the server where i can issue ipmitool sdr list |grep degrees so i can filter some results. Can anyone assist please? Thanks.
Monitor Wan links other than Cisco
Hi! We have several remote offices that we would like to monitor the wan links on. The problem is that we DONT have Cisco routers but we use HP and EdgeCore switches with routing capacity. How can we monitor the response time and traffic on these switches? The WAN Add-on only seems to work on cisco routers.
Advanced Alerts
I previously evaluated OPManager and was wondering if Advanced Alerting was going to become available. I have the need to create multiple alerts based upon the same criteria, this was one area that OPManager feel short when we reviewed it. I need to be able to alert on the following Disk Space Used > 70% free and Disk Space Used < 80% Disk Space Used > 80% free and Disk Space Used < 90% Disk Space Used > 90% free and Disk Space Used < 100% Disk Space free > 100MB In my current monitoring product
How to install WMI on Client PC
Hello, I'm trying to use Opmanager with the WMI protocol, but I can't get it to work. I think the reason why it isn't working is because I don't know how to install it properly. That because I've never done it before. Maybe there is a port that needs to be forwarded or another service that needs to get activated but I can't find what it is. For testing the WMI I'm using a small free windows program called Solarwinds WMI Monitor. When I test the WMI protocol it says that the Remote server is unreachable
Buffer Failure
What is Buffer Failure with Cisco Router?
Opmanager cannot monitor the server it resides on
I am having an issue where opmanager cannot authenticate to the server it is currently residing on, therefore I cannot monitor it's resources. I've never had this issue before. Could you please advise on this? --Nate
Exchange 2007 Dashboard questions
Hallo. I just enabled the Exchange dashboard. I am running Exchange 2007. I wonder about send/received statistics. After finding out that the SMTP monitors don't work for 2007, I started wondering why they are added and displayed in the dashboard. What I would like to see is a send/receive statistic per hour/per minute or so. What I see in the transport monitors is Messages received per second. All other statistics values are 0. The messaged received total doesn't give me a lot of information. I
Retrieving cisco router config changes hostname!
Tonight we had a minor disaster. I set up OpUtils to copy some of our router configs, which had hostnames like this: hostname router1.site1 hostname router1.site2 etc. Well, OpUtils CHANGED THE HOSTNAMES when retrieving the configuration, dropping the suffix qualifier. As a result, a technician didn't realize he was in the wrong router and screwed up a configuration. I've verified the behavior in several tests. It also changes the domain name, prepending the suffix it stole from the host name (e.g.,
Custom MIBs in the switch summary
Hi, Currently trying out OPutils as I look for a system to track our switching/ip needs, and I'm having a bit of trouble with getting info up for my switches. I am using Extreme Summit 350x switches, and the switch summary screen slows port/mac and link information, but not the VLAN names of each port. I have added a custom MIB into the MIB browser, and if i walk through using that MIB, i can see the VLAN ids. My question is, how do I get these vlan ids to show in the main switch screen? Thanks,
when i am trying to setup email alert it is giving me error 6002
i tried to set up the SMTP with gmail and yahoo but are not working getting error E6002 please help me out inthis u can email me on shinep@intelligroup.com
All my laboriously entered subnets vanished without warning!
I spent a couple hours carefully entering all our subnet records, then suddenly they all vanished! I thought I must have accidentally hit delete or something, so I began entering them again, and before I got a third of the way through it happened again! This time I'm certain I did not press delete (and anyway, OpUtils would have asked for confirmation, no?). The records all entirely vanished. I just bought this and if it's unstable I'll want a refund. What's going on? I'm running on Windows Server
URL Monitoring - controlling browser reported
Hi, new to OpManager and looking at it to check some sites for me using URL Monitoring. The sites expect certain browsers to present themselves and use javascript and vbscript to check browser and redirect if valid supported one. Can I get URL Monitor to lie about what it is and support script so I don't have to make code changes to the site to allow it to be monitored? If this is all covered off in a manual page(s) somewhere please just redirect me to appropriate section as I haven't looked at the
Cannot complete monitor ESX Server
Dear all, I can monitor Virtual Machines's CPU Util and Mem Util from ESX Server But Disk IO and Network IO cannot monitor please recommend me how I can revise configuration for complete monitor Virtual Machines .
Memory and CPU Utilization Process
Hi OpManager Team, Kindly assist on this , i would like to know what process is going on when the alarm trigger CPU or Memory is above the threshold. I think it OpManager should able to view the process. Thanks you, Regards, Ahmad
Cisco CATOS Support Problem Again
Opmanager first found the cisco 6509(CATOS) as a route and I change the type to Cisco 6500 and switch type. But the portname can not show the right name(such as Ethernet G2/1 etc.) and only show "long ...". For this customer's network topology is cisco 6510 connect with cisco 6509 via the ATM layer(Nortel Passport 15000). Please tell me how to solve it. I also want to know whether the product support cisco CATOS. For performance monitor. It can show memory usage and cannot show CPU usage. Frank
Error occured: We are sorry for the inconvenience.
We have a problem on a newly installed server with OpManager 8052. The server is running Windows Server 2008 R2 (which I was promised by OpManager support that it is supported running platform). The problem is that when you run the dashboard (we are running it on a remote machine) a message appears saying: "Message from webpage" "Error occured. We are sorry for the inconvenience." "Please try after some time or refresh the page and try again" Sometimes it helps just to click OK and the dashboard
manageengine supported devices???
can anyone please tell me where can i find the list of supported hardwares for the manageengine network management software??
Dashboard Refresh
Is it possible to have only the widgets do a refresh on the dashboard? When the whole dashboard does a refresh the widgets that show real time traffic looses there graphs for a few seconds before it picks up again. We have widgets that show "Recent Alarms", "Business View Summary" and "Devices Exceeding Response Time" and for them to update there status the whole dashboard need to be refreshed. It would be great if you could set up individual refresh rates on all the widgets instead.
read xml output
Is it possible to read an output from a custom xml in opmanager?
OS Processor Queue Length alerts
Hi, Opmanager is throwing alert messages and I'm not sure if this means there is an issue worth looking into. Anyone familiar with an alert like this? Source Domainserver Severity Critical Last Updated Mar 13,2008 03:39:07 PM Message OS Processor Queue Length is 15 Queue, threshold value for this monitor is 13 Queue thanks
RHEL 5 Monitoring Issue -- Vinod Pardeshi.
Hi, I have installed opmanager 8 with build 8052. I have installed adventnet Snmp agent on RHEL 5 64 bit server. When I add that linux server in opmanager & check the Credential Details using both snmp & clip,everything is OK till here. Now the data in CPU & memory Dail is all Wrong. Plz help we have around 6 RHEL5 Server. & I need to dotesting on all server. Regards Vinod Pardeshi
Periodic Backup in OPM
Dear All, No functionality about Perodic Backup. It is possible memual only. Is it right? So we want those feature. Is it feasibility?
HOW CONFIGURE MIB
is there any document explaining how to configure mib? how to use mib browse? any tip?
Migrating OpManager
Hi All, We are currently running OpManager Premium 8052 (32 Bit) on MSSQL 2005. Our hardware is a little underspeced and we wish to migrate to a new server. Is there any documentation to refer to? We also want to upgrade the OS from Windows 2003 (32bit) to Windows 2008 RC2 (x64) and also upgrade MSSQL to 2008. I also have another thread for the Windows 2008 RC2 support: http://forums.manageengine.com/#Topic/49000004040651 Thanks Chris
VM monitoring
Hi, i am unable to fetch the VM installed in Vsphere (ESX server version4). what is the way to fetch what all Virtual Machines has in installed in Vsphere currently using Opmanager build in 8052
TTL EXPIRED IN OPMANAGER
I am still having problem ttl expired in Opmanager routers Expiring your time in transit do not get critical status with status are UP anyone know a patch to fix this problem ????? Pinging 10.190.8.1 with 32 bytes of data: Reply from 10.190.241.8: TTL expired in transit. Reply from 10.190.241.8: TTL expired in transit. Reply from 10.190.241.8: TTL expired in transit. Reply from 10.190.241.8: TTL expired in transit.
Start Opmanager 8.5 on Ubuntu server 8.04LTS
How do I get opmanager 8.5 for linux to start automatically at boot on Ubuntu server 8.04 LTS, I have installed the application in the /root/ManageEngine/OpManager/bin directory. Thank You.
Opmanager 8040 and java.exe using up all memory
Has anyone experienced a serious java memory leak upgrading to version 8040. In a short period of time (two days) it consumes all memory on the server.
Corrupt Views
Hi, Is there a way to rebuild the infratructure views? Mine are showing weird problems, e.g., devices in the wrong views. Thanks
In OPM, the measured memory utilization is high than real memory utilization.
Dear all, Our customer installed OPM server in linux device. Managed server Linux version: 5.2.6.18-128.e15 64bit They manage the linux server using SNMP protocol. (HOST-RESOURCE-MIB). They can't the Telnet/SSH protocols because of security problem. Asset Detail: Measured memory utilization: Issue: When we click the Test Monitor button, the memory utilization is normal as follows: The memory utilization shows normally in the Snapshot page as follows: But when UI is refreshed, the memory utilization
Monitoring SQL jobs in SQL with OPmanager essential
Hi There, I'm a new user that is using the OP manager essential. I'm trying to configure a monitor for MSQL jobs. I can see the SQL server but I cant't find where to cnfigure the monitor. Same for Exchange. Can anyone point me in the right direction? tnx Danny
Windows 2008 Server Ports
Hi There~ I am trying to monitor a windows 2008 server, but I am not able to do if the firewall is on. I can monitor it if i shutdown the firewall. Could you please tell me what are the port numbers that should be opened in firewall to monitor the windows 2008 server? Regards, Balaji Vembu
OpManager 7 - No RX or TX on Interfaces on Device Snapshot
I do get interface detail info, so I know OpM is gathering the data with SNMP, but it displays "NA", "NA", "NA" for Rx, Tx, and Errors I tried removing and rediscovering the interfaces with no success ideas?
Trial of VoIP monitor in OpManager
Hi, I'm a licensed (Premium) user of Opmanager. How can I trail the VoIP Monitor features with in my existing site? Regards, Carmel Lee
A scrolbar when you add a link
When you add a link on a map between 2 devices sometimes the names of the interfaces are to long that you aren't able to see the whole name of the interfaces.
Only the first MAC address from switch port mapper per port shows up in IP address area manager.
Hard to explain, but if I have multiple ip address's/mac address's connected to a single port on a switch (because the other end has a dumb switch, is a virtual server, etc), only the he first ip/mac listed in the switch port mapper section (the rest are listed when you click "more') will have that corresponding port listed in the ip address manager section. Does that make sense? Please advise.
OP-Manager delete SMS notification Q
Hi, I'm using OP-Manager installed on a virtual machine with the DB in MS SQL. We are in the latest build 8052. The SMS modem is attached phisically to the host and all is Ok if the VM doesn't move (VmWare V Motion) to another host. If this is hapening the SMS notifications will be queued. Once the VM will be moved back to the proper host and connected to the SMS modem, all the queued SMS will be sent over. Is there a solution to delete the SMS in the queue? If not I would need to wait that
ifspeed change alerting
I'm evaluating OpUtils at the moment and I have a question concerning the interface speed. We had some problems with the cabling in the past. The result of these problems was a change of the interface speed from 1Gbps to 100Mbps. At the moment nobody notices such a change until a problem occurs. Is there a possibility to generate an alert with OpUtils if a specified interface changes the speed? It is not necessary to generate this alert immediately. An alert after a scheduled rescan (every hour)
Next Page