Device Template For multiple 2003 servers with different thresholds?
Say I have several classes of 2003 application server. Monitors are using WMI. A) Type 1 that needs to say monitor free disk space by GB, threshold of less then 10 gigs. B) Type 2 that needs to monitor disk space by GB, threshold of say less then 50gigs. It would appear you cannot create two device templates using the same OID or name like "Windows 2003". So you make one with a OID "Windows 2003 A" and "Windows 2003 B" but now you cannot apply the profiles to any devices because the list of devices
How can I run OpManager as service in Linux
How can I run OpManager Build 8052 as service on CentOS 5.4 Linux server.
CPU and Memory Utilization for F5 Big-IP 3600
Hello, Running OPmgr 8721. Trying to get CPU and Memory Utilization for a device running 9.4.6. I have downloaded and loaded the mibs from here: http://www.oidview.com/mibs/3375/md-3375-1.html It is a multiprocessor device. Most of the monitors that were created for the 3600 template work, except for CPU and Memory. This OID for CPU in the template returns nothing: 100-(.1.3.6.1.4.1.3375.2.1.1.2.1.42.0*100/.1.3.6.1.4.1.3375.2.1.1.2.1.41.0) Likewise for the Memory OID: (.1.3.6.1.4.1.3375.2.1.1.2.1.45.0*100)/.1.3.6.1.4.1.3375.2.1.1.2.1.44.0
Reports
Is it possible to publish a report in html format, say every 5 minutes to an FTP site to be uploaded on a different web server? We have a web facing application utilising around 6 servers, the monitoring is done on a server that is not accessible to the web. We want to be able to provide high level visibility of the servers availability to the board and customers. The best way that I can think of is if the MAP can be published every 5 minutes to an ftp server or such... Is this possible? Thanks in
When I click on the Virtual Devices MAP it shows Error!
Virtual Devices Maps results in Error! So far all the other maps seem to work. Anyone else having this issue? I can find the VM's if I search for them.
Plugins
1. Opmanager plugins have two kinds? a. Integration with Opmanager b. Installed separately
can i integrate event log analyzer in opmanager?
now i'm running opmanager free edition in a Linux box, i need windows event logs. is it possible to integrate event log analyzer in opmanager.
not discovering devices
I had two problems: 1) I couldn't get the software to run after it was installed as an NT service. The startup would hang and fill up the log files with this repeated over nd over: 15:02:38:421 PM ##### PROBLEM IN INITIALIZING MODULE class com.adventnet.nms.eventdb.EventMgr ##### I uninstalled and reinstalled a number of times. And by the way, the uninstaller doesn't remove or stop the mysql process nor could I find it listed in the Windows Services. I had to manually kill it. 2) I finally got
Rediscover now Window Prob
Hello Member, my Problem is the Window from "Rediscover now" is to small, Ican´t Scroll to the send Button. Plese help :).
importing images for maps
how do you import a map or image to be used as a map
Unexpected OpManager Shutdown
Recently our OpManager service shutdown without warning and we went a number of days without even realizing it. OpManager logged the event in the Windows Event Log as: "There were 2 failed launches in a row, each lasting less than 300 seconds. Giving up." A second or two later, another event was logged as: "There may be a configuration problem: please check the logs." I've seen this issue in a few other threads but there didn't appear to be any specific root cause. Is there anyway we can
WMI Performance Issues and hotfixes
Hi Gabriel, Here is a good article from MS on WMI issues. http://blogs.technet.com/b/kevinholman/archive/2009/06/29/getting-lots-of-script-failed-to-run-alerts-wmi-probe-failed-execution-backward-compatibility-script-error.aspx Of particular interest are these three items: 1. Apply http://support.microsoft.com/kb/933061 This resolves a LOT of issues on the Windows 2003 OS with WMI. This should be one of your first steps. This applies to x86 or x64 Windows Server 2003 SP1 or SP2. 2. Registry
Where can download apache.zip to enable SSL?
i want to enable SSL,but i can't download apache.zip use URL http://bonitas.adventnet.com/opmanager/12Sep2007/apache.zip please tell me right URL
WMI is not showing in Credential Library when creating new
i installed opmanager free edition in a Linux system. For configuring Event logs need WMI credential, But it is not showing in Credential Library, it showing only SNMP v1/v2, SNMP v3, TELNET/SSH. What i've to do?
JAVA 95-100% on Dual Core VM System in OpManager
Hi Support Team We have noticed for sometime that opmanager java is always in 95-100% on a dual core VM system ? Isn't VM supported for Opmanager for installation ? Attached are some screenshots ,thread dump and logs. http://bonitas.zohocorp.com/customer_uploads/2011_1_3_3_47_1_OpMan_logs_Jan_3_2011_11_37_31.zip Thanks Gopi ME Tech
Fixing WMI Errors in OpManager
Hi Team, I recently saw a Script in ServiceDesk Plus, which can free up Firewall ports, DCOM , RPC errors in Systems before the systems can be installed with the agent version in SDP ? Is there any chance to incorporate this script in OPManager and when we discover the devices and use the WMI Credential, this Script can be executed and free up the WMI errors. Because in large environment with 250+ devices, it becomes difficult to go to computer one by one and do the steps you have in knowledge
How i can configure syslog and event logs in opmanager and in clients?
HI, I'm a system admin in an IT software company. Now we using nagios monitoring tool, but it is not enough for our requirement, we need to get syslogs and event logs through a centralized monitoring tool. I downloaded and installed OpManager in a linux box for this purpose and added some systems for monitoring, but it shows only its health like CPU, Memory, HDD, etc. My question is how to do syslogs and event logs through OpManager?
Unable to Add ESX host (Unable to fetch Managed Object details for the object)
Hi All, I tried to add an ESX from Maps>> Virtual Devices >> Add New Host and i am getting error: "Device already present in the System" When i tried to search for device, error is as below: "Unable to fetch Managed Object details for the object" Let me know where am i going wrong. Regards, RK
Notification Profiles Triggering stops working AGAIN
Hello, Running Opmgr 8721. Came back after a weekend to find ,yet again, that notification profiles were not working. The Opmgr service was running but no one rec'd alerts. Once I restarted the service, a ton of notifications were sent, all late. Is anyone else having this issue? I see no other solution at this point than to reboot the server every day. Please help! Thanks.
IN IBM-AIX MACHINE COULDN'T GET MEMORY UTILIZATION
In IBM-AIX device, I couldn't get the memory utilization using Host-resource.mib. We have use default SNMP of IBM-AIX. That is to say, we don't use Net-SNMP. In default SNMP, we couldn't get them memory utilization. But we could get the CPU & DISK Utilization. How to solve it? Thank you in advance.
Opmanager and D-Link DAP 2553
I currently have the Dlink MIB (DLINKAPMII2553.mib) loaded into OpManger but I'm having a difficult time getting a simple request, how many and what are the mac addresses of the connected wirless clients. Has anyon been able to accomplish this?
OpManager Loss Monitor
I am OP 6.5 install and run for a while. It work fine with correct SNMP community and cisco 2960 switch. The problem since I monitor 3 days with 5 min snapshot setting for more than 100 devices, the network device monitor data change into N/A instead of correct snapshot data ? I change setting "Admin/SNMP Parameter" into 3 sec time out/5 times retry and won't get snapshot back to work ? Running MiB Browser is work fine ? That's production environment which need to monitor about 150 devices with OP,
Supported Device
Hi, about OpManager Deluxe edition, i want to know, how many devices support? i'm evaluating this product for the network operation center with more than 5000 devices. Kind Regards,
device with two addresses
Hello, i am trying to add a new device, a firewall with two interfaces, one in internal LAN and another in DMZ. OpManager sees two devices instead of one. How can i tell him that is the same device ? thanks
Temperature Monitor
Hello, I am having trouble adding the Temperature Monitor to Devices (Cisco routers and switches). I goes through the process, but at the end, it does not show in the list of Monitors and the dial shows "NA". Assistance is needed. Thank you, Devon Vernon
Disk Used Space 100%
Dear support , I was install Opmanager for monitor server system , when i update to version 8722 , some server of window 2k3 ( only 2 server / 15 server ) with warning Disk Used Space 100% , but in this server it's not . When i click "Real Time" of disk , it's comeback to normal . It's only on version 8722 , in version 8721 not have this problem . Pls fix this problem . Thanks !
Remote monitoring
We currently use OpManager build 8720 to monitor our main network. I have a smaller subnetwork within the main network that routes traffic to different places than our main network does but I can't adequately monitor that traffic because OpManager is on our main network. Are there OpManager agents I could install in the smaller network or is there another solution?
Why can't I change the Category?
Please see the two attachments. Both servers are virtual servers and are both Domain Controllers. The only way that I can get the Active Directory dashboard to display is to set the category to Domain Controller. I was able to do this for one server, but on the 2nd server and other virtual servers I am unable to change the category. Is there another way to display the Active Directory dashboard?
Event ID configure on op-manager
how to configure event id on op-manager
Opmanager Performance
Hello, Are there equivalent tweaks available in Opmanager 8721? Periodically, the server will crash and I have seen on other posts where memory for Java and Mysql may be an issue in these crashes. http://forums.manageengine.com/topic/nfa-professional-edition-performance-tuning-tips We have seen consistent heavy CPU usage due to many instances of cscript.exe and ping.exe running, so it isn't necessarily java.exe which is the culprit. Monitoring 500 servers, our Opmanager server is a virtual machine
Exchange 2003 information store size incorrectly reported
Build number:8722 I have set up the Exchange dashboard on my Exchange server. I wanted to monitor the exchange database size. I updated to build 8722 which allowed me to add used disk space as a monitor, but it only reports the size of the EDB file, not the combined size of the EDB and STM file which Microsoft uses to determine total Exchange database size. Can you write a patch to make this monitor count both files to give an accurate indication of database size?
CPU/Memory usage as per feature
Do you have some data that if i enable some service in Opmanager how will that effect the CPU/Memory usage. I have idea about the number of interface/ number of device, are there some more which affects performance of the server. Suppose if i change the polling interval/have many notification profile/ monitoring errors/discards etc.
Easy User Access to Monitors and Thresholds
Hi Team Just a suggestion. 1.While configuring device templates, would be nice to include Filters - If CPU >= 75 , WARNING, Alert - TechA@xyz.com,If CPU=65,MAJOR, Alert - TechB@xyz.com etc 2. List View can have more options from Quick Config Wizard, rather than using Quick Config Wizard for One to Many, List View can have all the options Many to Many. 3. Is there a way to save a device configured with all the monitors, thresholds, windows services, custom monitors and then copy/past the setting to
Can disk utilization be displayed as MB free vs % used?
Is there a way to display a server list with drive space available in actual MB rather than a %? Right now the servers Infrastructure View displays only CPU% and MEM Utilization%. I'd like to create a new view that let's me display MB free on C:. That or add some sort of Top 10 to the Dashboard that shows the C: with the least amount of MB free.
Theshold values gone.
I don't see the threshold values any more. All the thresholds values are disappeared. When I look into the detail, all the Threshold alert value and the rearm value are gone.
Thresholds - all lost over night
Hi, Something happened and we have lost all our thresholds for all devices. The thresholds are not present anymore in the templates. This has happened for all templates in the same time - the standard ones (cisco, windows 2003, all). They are all missing - those built in the original templates but also those modified / added by me. If i go to the a specific monitor I can see the status of the threshold as "normal" in green but if i try to edit the threshold there is nothing as threshold alert or
Monitoring cluster ESX 4.0
Hello, we have a ESX CLUSTER. When we try to discover one nodes of the cluster, throught the "Add New Host" button of the Virtual Devices Infraestructure view, the application reports an Error, and the device is not discover. Does opmanager supports ESXs cluster? How we can monitor these types of devices? Thanks
Alarm Screen Options
I want an option to e-mail the specific alarm from the alarm screen. I would be nice to be able to select "e-mail alarm" and send it directly to the responsible tech or even into my Service Desk, not just automatically.
Opmanager support Multi CPU ? SQL DB which Opmanager using.
Dear All, Please , Confirm to us. How using the opmanager work on multi cpu processor server. or how can check it by myself , We want to surely with server spec for opmanager installation. and show to opmanagere supported and using the multi-processor cpu. Database Question Database of opmanger which default to be the mysql db. Don't sure the version of MySQL and its support to Muti-CPU or not ? if you told me how i can see its ( cpu usage more than one for runing the opmanager or using
OpManager Won't start
Hello, After my linux server has crashed OpManager won't start. I have copied the .vmdk (Vmware virtual disk) to another server. And when i am starting ./StartOpmanagerServer.sh i get the message. Please enter License file path: Any help?? Greetings, Meerman
Next Page