Discover effective techniques and shortcuts for hassle-free management of network configurations with Network Configuration Manager
Hello there, Is everyone feeling enthusiastic about the upcoming free training session on Network Configuration Manager? If you're a new user, this training is designed to assist in initiating your configuration management strategy. If you're a current
[White paper] AIOps: The journey from reactive to proactive ITOM
Join us as we explore the effective implementation of AIOps in your IT infrastructure, its maturity stages, and potential business impact. We also discuss the past, present, and future of AIOps offerings and the market, along with the current challenges.
Connect with us at ManageEngine North America User Conference!
After a long wait of three years, the ManageEngine User Conference is back in North America, and we are super excited to meet our customers! The conference will take place in May in Chicago and Toronto, and in October in Dallas and Orlando. Chicago User
OPmanager Plus NCM fails to backup startup-config from ASA
We have Standalone NCM, and I think ran into this same issue a few years ago, can't remember to fix. I am evaluating Opmanger Plus and Running config backs up OK, but the startup config fails due to unknown command. more more nvram:startup-config ^ Error:
Cisco ASR 1001-X NCM backup failure
I'm trying to automate my backups for my environment, however the script for the Cisco ASR routers seems to have an error in the backup script: after it shows the running config it enters exit, which on the ASR series logs out instead of exiting EXEC
NCM - How to modify deviceexpert password
Hi experts, I have NCM Enterprise edition and trying to set up an SCP transfer between some devices and NCM. So, I would like to modify the SCP current password but I don't have the default password. Therefore, is not possible to change the password.
NCM - SSH Timeout on cli commands
Hi, is there a way to increase the timeout in NCM 12 for the cli commands output? I have some hosts where the backup is done via SSH, those hosts have a bad connection and sometime the cli command output freeze for few seconds, this cause the backup to fail. Regards, Christian
NCM default deviceexpert password
I have OpManger with NCM Plugin installed. It works for CISCO device, i try to backup brocade switch. test credentials works but it tooks a lot of time. backup failed, i would like to test the command from Brocade SSH connection but i don't know scp deviceexpert password
Passing Ctrl - Y to configlet
Hi, I'm trying to perform backup of Avaya 4926GTS switch but the switch requires you to press Ctrl + Y before you can login to the switch. Using the normal backup operation was not successful so I'm trying to use configlet but there seems to be no way
Configlet to Reboot Switch
I have ran a configlet to upload the latest firmware to my switches. reload Y end I now want reboot them in batches but when I created a configlet with the following I get an error reload You haven't saved your changes. Are you sure you want to continue
Uploading Config/Draft to Palo Alto
Demoing OpManager with the NCM add-on. The backup portion is working great. Now I am trying to take a config from firewall 1 and upload it to firewall 2 (new device with different IP). I have modified the draft config with the mgmt IP of firewall 2.
Cisco IOS Verify File
Hi, with NCM i was able to upload Cisco IOS Images to Switches and Routers. I am now looking for a solution on how to verfiy the uploaded file against a MD5 hash. I have tried to accomplish this via the "advanced script" configlet, but i am failing on
[Webinar invite] How to avoid IP address conflicts in your network
Hello there! Tired of troubleshooting end-user complaints about IP address conflicts? Often, you and your team are only alerted about this issue when an end user reports it or when it cascades into a major network issue. Here's how you can avoid this
Error when using NCM TFTP
When I click the download button in NCM/device management/tftp files, to pull in a Cisco.SPA file for pushing firmware I get the is error. {"error":{"code":5000,"message":"Internal Server Error while processing this request."}} Any help appreciated.
APIs
Afternoon All, Has anyone had experience building an API script which would extract data from NCM (such as Device info) and then displays such information into a table of some sorts. cheers.
Configlet archive download-sw upgrade Cisco 2960X
Hello, I can not find the configlet to update the cisco 2960X switchs with the archive download-sw command Could you help me create it? The command on the switch is: archive download-sw /leave-old-sw /reload scp:/deviceexpert:PWDdeviceexpert@IP.SRV.NCM.PROBE//SOURCE_FILE
Join us in Toronto for our first ever User Conference in Canada: 3 days of invaluable training, and fun networking!
We'd love to see you in Toronto for the ManageEngine User Conference from September 10 to 12, 2019. It's going to be three action-packed days designed to help you get more out of your ManageEngine experience - with an entire track dedicated to IT Operations Management, and individual sessions focused on the products you love. Click here to check out all the details. Here's what you can look forward to: Attend in-depth product presentations that cover everything from feature updates and how-tos,
Firmware Vulnerability for Aruba/HPE Switches
Hi, we have many 2530 and 2930f switches with the ArubaOS. Is the Vulnerability Scan not working for this switches? In the Database i cannot find the CVE-2022-23677 or CVE-2022-23676 CVEs. Are there not integrate in the DB? Best Regards Steffen
Connect with us at ManageEngine Australia User Conference!
We're thrilled to invite you to our User Conferences in Australia. We'll bring you multiple in-depth product presentations on all aspects of IT management, as well as plenty of tips and tricks, opportunities for one-on-ones with product experts, and some
Cisco WLAN Controller
Hi, we have 2 Cisco WLAN Controllers (5520 and 3504) which I would like to add to NCM via SSH. Unfortunately, I can't get a working connection to the WLCs although I can see that NCM is connected to the device, so there is no issue with the network, credentials
Reverse Backup
I was able to do this with another network manager I am not sure if it is possible in OpManager. Since OpManager can pull backups of switches is it possible to do the reverse and send a configuration to a switch through OpManager?
NCM Probe doesnt seem to be iterating "user Role" from central
Unable to see the devices listed on NCM probe when logged in with AD user account. User permission is set to "Admin" with access to all Probes.
Network Configuration Manager - Stopping support for 32 bit installations
Dear Users, Please be informed that 32 bit installations will no longer be available for ManageEngine Network Configuration Manager. Support will be stopped for all 32 bit installations by September 30,2022. We request all users with 32 bit builds to
Supported Operating systems list for Network Configuration Manager installation
Dear Users, Please be informed that from July 31st onwards, Network Configuration Manager application will not support these operating systems (and the older versions below it) for its installation. Windows 7 Windows 8 Windows Server 2008 CentOS 6 RedHat
NCM failing to backup Palo Alto devices after upgrade
I'm hoping someone went through this already and has a solution, or at least a way to troubleshoot. We had OpManager Professional 12.5.583 backing up some PA220 and PA3260 devices for months without issue. We just upgrading the Palo Alto devices from
Inventory
Inventory of Cisco Stack, Cisco VSS, Nexus switches... All of this doesnt show on any of inventory reports. I believe this happends because templates for this devices are not good. It doesnt pull the right OID. Can i modify the device template so it uses
Not Getting the device Backed up configuration on the OPmanager Probe
I have a Network device that is getting backed up using our Opmanager and backup was successful every time, I have done some changes, now I need to revert back to pervious configuration file. where will the network configuration back up be stored in
Syntax Guide for Configlets
Is there a basic , or not, guide of syntax options for the configlets? I am trying to introduce a timer or wait feature...so that the desired command is entered , say 15 seconds , after the ssh login.
Advanced Configlet Documentation
Is there a document that lists all the possible functions that can be called from configlets for advanced scripting? I feel like the "advanced" scripting is super limited based on the URL below. For example can we parse output that is sent back to the
NCM will not connect via SSH
I am able to connect via Putty/SSH from the server NCM is installed on without have do to anything special. Trying to connect to a Palo Alto Firewall and we get this message from the SSH applet in NCM and when trying to test the credentials. (Ip Hidden)
Massive add to NCM for non added devices
Hi, I'm running enterprise edition OPM with NCM add-on. I have recently upgraded my NCM licence to i could cover all my devices with NCM. So, i have a lot of devices that OPM monitors that are not added to NCM. Is there a way I could filter them out,
[Webinar]: Preparing your IT department to meet the demands of the hybrid workforce
Continuing into 2021 and beyond, more staff will prefer working both from home and from the office. Evidently, the hybrid workforce is here to stay, and the temporary operational changes and duct-tape solutions for managing it will no longer work. Now,
Where can I see a list of backups done on a switch?
Looking for a list of all the backups done on a switch in case I want to restore. ...Alan
Restore configuration of switch
Hello and sorry for my english, I have NCM since 1 month and i really don't unbderstand how to restore config on switch. I have only cisco switchs. these switchs are added in NCM with "SSH-FTP" credential, this works, backup works. But now i want to restore
Webinar featuring IDC’s Mark Leary: Make your IT operations future-proof with the Branch of One architecture
With the pandemic, the unprecedented need to support remote working drove several IT organizations worldwide to make drastic changes to their infrastructures. With band aid fixes and make shift solutions, organizations managed to retain business continuity
Automatic Update
Hello everyone, I was trying to figure it out if this tool https://www.manageengine.com/network-configuration-manager/?pos=MEhome&loc=ProdMenu&cat=ITOM&prev=AB3 it can be configured in a way that it can update ifAlias interfaces in an automatic way. Example:
[ManageEngine Workshop - New Zealand] ITOM Unplugged - Realigning IT Strategies for the dual workforce!
Did you know that, according to a report by Microsoft, 71% of New Zealand's workforce wants flexible work options to continue post-COVID-19? One thing is abundantly clear:
Sync Config
Hi, I am having an issue of synching a startup and running config on one of my devices, and also i noticed it's device template is labeled as a switch instead of router, i am unable to change it since i can't get a router template from the drop down.
Cisco SNMP Backup switch
Hi all We are running a eval on NCM after testing ops Util a few months ago. we had no issues getting snmp backing up a switch using ops util however when i try do this for NCM it keeps failing. Where do i start to troubleshoot this? Is their logs anywhere
Going to ssh v1 to v2
Hello, We have some older switches in our enviroment that are running SSH V1. We have been testing switching them to V2. When we switched to V2 NCM sees the switch as being down or not available. We are currently locked out of the device and can not get
Next Page