Configuration Back up
Hi Community, I am having issues with my backup on Opsmanger, some of the devices can't back up. i did a test credentials and this was the output. Please find the attached. Thanks, Tetteh.
Policy violation
Hi Community, I am having issues with policy violation, we set a Tacacs policy on our devices, and out of three we have two being marked as right and one being marked as wrong even though all three are in the configuration. How do i get them to be marked
Learn tips and tricks for managing network configurations using Network Configuration Manager!
Hello there, Are you all getting excited about the upcoming free training session on Network Configuration Manager? If you're a new user, this training will help you kick-start your configuration management strategy. If you're an existing user,
Device deleted
When a device is deleted in NCM does the device configuration get deleted as well?
NCM Professional or Enterprise
Am i allowed to use the Professional Version of NCM even if I have multiple sites (same company) to manage? I dont need the split up between Center and Probe. One server is enough.
DeviceExpert Exporting device config history
Hi, I want to export the past Config history in TEXT file by DeviceExpert, do you have it as a function? I know I can get up to 5 generations out of the past in the report, but I want to export all the past history of managed devices to a text file!
IT Operations Management Seminar 2020
Greetings, Over the past few months, the IT industry has been subjected to several "New Normals" and there has been major changes in how ITs operate. When the pandemic started, organizations supported remote work and modified their system to accommodate
Having problems getting config backs up run on some new devices
We have about 5 new devices that OpManager can't back up. After I add one of these devices, I take the following steps: Add to NCM On the Apply Credentials page, it's set to use SSH and use our standard AD (Active Direcotry) credentials like all other
Cannot add device using API
I'm getting an error when I try to add a device- using POST Here's the Command- https://test.com/api/json/ncmsettings/addDevice?apiKey=<REMOVEDAPIKEY>&IPADDRESS=1.1.1.5&DEVICE_BEHAVIOUR=behavior&SERIES=pvseries100&MODEL=pvseries200 Getting below error
Blocking the port from NCM after discoverying new device on it in OpUtils
Hi there, I want to know if there is a automated feature in NCM regarding blocking a port after OpUtils discovers a new device on that port. If so, could you please explain it step by step how I can accomplish it because I am not too familiar with the
Learn tips and tricks for managing network configurations using Network Configuration Manager!
Hello there, Are you all getting excited for the upcoming free training session on Network Configuration Manager? If you're a new user, this training will help you kick-start your configuration management strategy. If you're an existing user, you'll have a chance to learn about the latest features and enhancements. We're looking forward to helping you manage your network configurations better, so you can avoid network downtime and easily overcome disasters. Hurry and register for our two-part
[Webinar] Back to work: Re-strategizing your network monitoring practices
With restrictions being lifted, companies are focusing on calling only the employees who really need to work from office while the rest of them are remote. This has led to an imbalance in IT infrastructure once again. Apart from employee safety, factors like VPN and configuration management, network security, etc. need to be taken into consideration. Join this webinar to learn how a streamlined network management strategy
MIgration from Device Expert to NCM
Hello, I have couple of questions related to migration and licence for Device Expert 5990. We are currently in the process of migration of our old Device Expert 5990 to a new server, i would like to know is it better to stay on old 5990 version or move to NCM ? Is there any How-T for that migration ? Second thing is about our licence. We have licence for 5990 and now we are wondering can we use that licence on new NCM or not ? If we can what do we need to do, to use it ? br, Tomislav
Network Configuration Manager login failure issue for few customers.
Hello All, Greetings from the ManageEngine Network Configuration Manager team! Few customers around the globe reported that they are not able to access Network Configuration Manager UI with error Invalid Credentials. While checking the issue in remote sessions, we found the table which has the user details of account got empty. Few other table entries related to user mappings were also missing. Though the application is running, users were not able to login to application. This all happened due
Introducing the ITOM podcast: Listen and learn how to avoid remote work roadblocks in your IT environment
With businesses around the globe transitioning into remote work, IT operations have gone for a toss. The enforced work-from-home policies, intended to maintain business continuity, have concurrently paved the way for the incidence of manifold operational bottlenecks Owing to these unprecedented circumstances, IT admins are on the constant lookout for information that'll help them streamline operations and support their remote workforce. So, to help you enable your remote workers, we have decided
EnableChangeTracking Switch Dell Serie N3000 N4000 Problem
Hello I am new to this community, a pleasure. Please help, when you want to activate the "" this shows error, change the configuration of Dell device template, guiding me as it would be configured in CLI mode, in the same way the activation of this service fails. Post Enable "EnableChangeTracking" Config CLI Device Template modified Switch Post config CLI DEvice template DefaultThank you so much Regards
Ignore strings in configs
Hi! We're evaluating NCM and found that, at least, in Mikrotik routers, that when config is backed up, some, commented, strings are marked as DIFF. So, if you config schedule for every hour, than you'll have a 24 copies for every day - which is not good. Example - in Mikrotik Routers at every config export shows current time: Is there any way to ignore or filter such strings in NCM comparation ?
Change Detection on Miktotik Router (RouterOS)
Hi! I wonder, is it possible to enable Change Detection on Miktotik Router (RouterOS)? If yes, can you tell how to do this? We're looking for NCM-solution and testing OpManager for now.
Leveraging OpManager to overcome bandwidth bottlenecks and erroneous config changes [Free webinar]
Greetings, As you all know, remote work has now become the new normal. To survive, businesses across the globe are shifting their operations to remote environments by extending their existing networks and adding supplementary IT infrastructure. However, this sudden expansion only makes a network more complex and introduces a whole new set of challenges, such as bandwidth anomalies and faulty config changes which could come back to haunt network admins. To help mitigate all your network bottlenecks,
Network Configuration Manager- Security advisory regarding CVE-2020-11946
This is an announcement regarding a security advisory addressing an unauthenticated servlet call vulnerability fixed in the latest version of Network Configuration Manager v12.4.196. PLEASE READ THROUGH THIS POST COMPLETELY to check whether your installation has been affected or not, and if affected, learn how you can resolve it. Issue and description: Unauthenticated API key disclosure - There was an unauthenticated access method to obtain the API key that was discovered in the product. This
[ManageEngine ITOM Webinar] Is your network ready to handle a remote workforce?
Businesses all over the world are shifting their operations to a remote work model amidst the COVID-19 lockdown. However while switching to remote work, businesses face certain complications such as network security, constant configuration changes, insufficient VPN capacity, and inability to scale mobile IT devices for remote employees. To combat this and ensure business continuity, IT administrators need to remodel their IT infrastructure. This webinar will help you learn how to secure your IT
Unable to Backup Device Configuration in NCM
Hi. I have added a new switch to the inventory, but when I try doing a backup of the switch's configuration I get the message 'Cannot trigger backup operation. Selection contains unmanaged device(s)..' However, the device is managed so I don't understand why the error is showing up. I've had a look for any clues but have had no luck so far. Thanks in advance for any help.
NCM Licensing Professional or Enterprise
Am i allowed to use the Professional Version of NCM even if I have multiple sites (same company) to manage? I dont need the split up between Center and Probe. One server is enough.
Chrome doesn't work with Device expert 5.9.7
Hello, everyone! Please help to find answer - when i use chrome browser with device expert 5.9.7 version I can't open "Change password", "User settings" windows. And I can't edit settings any existing user in "User management" settings. What is cause of this problems?
NCM Plugin
Hello, Although NCM plugin is installed and active, I'm not able to get compliance report or go to the NCM plugin as I'm not able to find it. Version is 12.4.102 Regards,
Remove device from NCM but not delete it from OpManager
Hi. I have some devices that i can't take backup off, but i need to monitor uptime,respons and so on, unfortunatly if i delete them from NCM, they also get deleted from OpManager. Is there anyway to remove a device from NCM without deleting them completly?
Rules problem
Hi all, i face an issue while writing rules for my device, i am trying to create a rule that is a 4 strings combination, means: should contain X and should not contain Y OR should contain Z and should contain Y there is a way to accomplish that? Thanks.
ManageEngine London User Conference 2020: Engaging sessions, presentations, and a lot of fun!
After the tremendous success of our User Conference last year, ManageEngine is all set to host a User Conference in London on March 2&3, 2020. Register Now With engaging one-on-one sessions and intensive technical presentations, the two-day event includes in-depth technical training that will help you manage your IT effectively. Here's what you can do there: Discover latest trends in Network Configuration Manager, watch live product demos, and get a sneak peek into our product roadmaps. Attend one-on-one
Join team Network Configuration Manager at Dubai User Conference!
ManageEngine is all set to host a User Conference in Dubai Feb 24 & 25 at The Address Dubai Marina and we are psyched about the same. With a track completely dedicated to Configuration Monitoring, the two-day User Conference is designed for users to get the best out of their ManageEngine experience. Register Now User Conference Highlights: Uncover the best practices and latest trends in IT Operations
Save your seat for our first ever User Conference in Mumbai!
The first leg of ManageEngine User Conference for the year 2020 is all set to take place in Mumbai on Feb 5 & 6 at ITC Maratha and we are psyched about the same. With a track completely dedicated to Network Configuration Monitoring, the two-day User Conference is designed for users to get the best out of their ManageEngine experience. Register Now User
Stop getting "Device Configuration Backup failed"
Hello guys, We recently decided to migrate from build 12.3.x to 12.4.101. So we generated a backup; however, we found it's totally useless in another build ! This was the first dark side of issue. Then we went for a fresh installation and configuration with build 12.4.101 and a time consuming configuration procedure ( Adding devices and configuring interfaces and monitors ). Soon, we realized that all devices are added to NCM by default. As a result, we are getting this error constantly. Could
OPManager NCM PLugin fail system location and description update
Hello, as reported in subject NCM Plugin fail to update system location and description update even if SNMP v3 is configured correctly. Where can I check to understand why it fails? Regards
PCI 3.2 compliance?
I am only seeing PCI 1.1.7 in the current version of NCM. Are there any plans to keep the PCI compliance scans up to date?
Question about NCM Plugin
Hello guys, I have a lot of question about NCM Plugin, can you help me? NCM can backup device configuration with ssh or ssh->tftp TFTP is not a secure protocol I read that is possible to backup and restore with ssh->scp but i didn't find in the option and I don't know where can i enabled it. When we Enable SCP is it possible to use for all the device? Nexus, fortigate,Avocent, GIGAMON, Netscaler etc..? If is not possible with scp is it possible to backup to external ftp server(not TFTP)? If the
What the different between R13 8310M and R15 8310M?
What the different between R13 8310M and R15 8310M?
Change IP management GUI
I need to change the IP address of NCM manager OPmanager, how do I change the GUI interface access IP? NOTE: I'm in version 12.
Untangle your network and start managing your devices efficiently with Network Configuration Manager!
Hello there, Hope you are all as geared up as we are for the next free training on Network Configuration Manager! If you are a newbie, this training will be a great platform to help you learn the tool with precision. If you are an existing user, join us and get updated about the latest features and enhancements. We have so many network management tips and tricks up our sleeves and we cannot wait to share them all with you. Hurry up and register for our two-part training series right away! First session:
Join our free workshop and elevate your network monitoring skill set!
To stay ahead of the competition, it is critical for network admins to keep themselves updated of the latest advancements in technology. We, at Network Configuration Manager understand this. That is exactly why we are hosting a free IT Operations Management workshop in New York and Chicago on Sept 24th and 26th respectively. Our workshop will help you understand how to overcome the most common challenges faced while monitoring your network infrastructure. Register now Workshop highlights: Learn
Attend the Singapore workshop, and get certified as an ITOM expert!
Get ready, Singapore—our ITOM workshop is all set to take place on Aug 29, 2019. Join us for an action-packed day filled with informative sessions on IT Operations Management. We'll cover the latest trends in network, server, and application management to help you meet your ever-growing business demands. Register now Highlights: See interactive product demos Attend one-on-one question and answer
Adding Cisco ASA with multi context in NCM
Hi All, Is it possible to add Cisco ASA with multiple context in NCM. We need to take backup of there are several context in the concerned Cisco ASA here. We need to take backup of every contexts. Is it possible? Any help would be appreciated Regards, Zobaarul
Next Page