Join our free ITOM Dubai workshop and resolve your network configuration monitoring woes!
Save the date! Our IT Operations Management workshop is coming to Dubai on July 22, 2019. We have interesting sessions on network configuration monitoring that are aimed to help you meet your business demands.You can participate in the interactive demos of our solutions and learn how to get the most out of your IT while getting certified as an ITOM expert. You can connect with our product experts, make new friends and share knowledge. So, come discover how you can improve the performance of your
ManageEngine ITOM Australia Semianr - Learn how to overcome IT management challenges!
We are elated to announce that we are all set to host a free IT Operations Management seminar in Sydney and Melbourne on July 16th and 18th respectively. Our product experts will walk you through on the various challenges faced while monitoring servers, networks, and applications. Register now Highlights : 1. Interactive product demos 2. One-on-one question and answer sessions. Agenda: View the entire agenda
Juniper Network Routers Models Reference Guide
Juniper Router Models: Juniper MX Series – The Juniper MX series is tightly aligned with the Software Defined Network (SDN) to provide an impressive system capacity, density, and performance. Juniper Virtual MX (vMX) Juniper MX 5 Juniper MX10 Juniper MX40 Juniper MX80 Juniper MX104 Juniper MX150 Juniper MX204 Juniper MX240 Juniper MX480 Juniper MX960 Juniper MX2008 Juniper MX2010 Juniper MX2020 Juniper MX10003 Juniper PTX Series The PTX series routers are designed for incredible speed, efficient
Attend our workshop, and get ITOM certified!
Save the date! Our ITOM workshop is coming to Dublin on June 11, 2019. During the workshop our product experts will walk you through the various challenges you might face while monitoring networks, servers, and applications. Register now Highlights: See interactive product demos Attend one-on-one question and answer sessions Become an ITOM Certified Expert Agenda: View the full agenda here Venue: Clayton
Backup of Cisco switches with no prompt for enable password
Hi, I'm trying to figure out the backup SSH credential settings in OpManager to support Cisco switches which are configured without an enable password prompt. The authentication steps when connecting to these switches is as follows: SSH Prompt for login name Prompt for password Connectivity to the switch is then established with the > prompt To enter enable mode, enable is entered and are then taken directly in to enable mode with no prompt for login name or password with the # prompt. Thanks
[Free online training] You're only a few steps away from becoming a network management expert.
Hello there! The free online training on Network Configuration Manager is right around the corner. What aspects of configuration management will the training cover? The training will cover key aspects of network configuration management like compliance and change management. Is the training for only new users or is there something for existing users as well? The training will have something for every user. If you're a new user, we'll walk you through all the features and about how they can help you
Remove/delete Device in NCM
HI i have 2 devices in NCM that i want to remove I been looking around in "Inventory -> Config Managment " and cant find a delete/remove button for the objects. So how do i remove them?
Attend the free online training and make yourself a Network Configuration Manager pro!
Hello there! We're all set to deliver our first free training for the year on Network Configuration Management! What will you be learning in the free training? In this two-part free training you'll extensively learn about change, compliance and configuration management. New to Network Configuration Manager? We'll be taking you through the entire scope of the tool to help you learn how to deal with network disasters. Already a Network Configuration Manager user? Join the training to catch up on the
Attend the free online training and make yourself a Network Configuration Manager pro!
Hello there! We're all set to deliver our first free training for the year on Network Configuration Management! What will you be learning in the free training? In this two-part free training you'll extensively learn about change, compliance and configuration management. New to Network Configuration Manager? We'll be taking you through the entire scope of the tool to help you learn how to deal with network disasters. Already a Network Configuration Manager user? Join the training to catch up on the
Unauthenticated Remote Code Execution Vulnerability
This document will explain you about the Java deserialization vulnerability reported by Offensive Security Group Security Advisory which allows, Unauthenticated arbitrary code can be executed on the server where Network Configuration Manager is installed. Vulnerabilities Fix Released on CVE-2018-19403 11-December-2018 What was the Problem? Unauthenticated arbitrary code can be executed on the server where Network Configuration Manager is installed. This allows users to execute payloads. How do
Free eBook: 5 ways to ensure business continuity in the wake of network disasters
Are you looking for ways to keep your network disaster-proof? Check out our eBook titled '5 ways to ensure business continuity in the wake of network disasters'. This eBook focuses on the benefits of Network Configuration Manager and aims at helping network admins making their networks disaster-proof. In this eBook you'll learn tips and tricks to Reduce network downtime by quickly recovering from network disasters. Ensure business continuity with disaster prevention. Get deep insight into network
Is there a way to add Cisco switches to NCM that don't require an enable password?
Hi, As per the topic title is there a way to add Cisco switches to NCM that don't require an enable password but still need the enable prompt entered? I'm trying to determine what the Credentials settings should be in OpManager under Credentials \ Backup for SSH to switches that don't require an enable password. When connected to these switches via SSH this is the sequence: Prompt for Login name Prompt for Password Prompt after login is > Enter enable mode by using the command enable and you are
Spirit up and become a Network Configuration Manager expert
Hello there, We are back with our last free training of this year on Network Configuration Manager and we hope you are all geared up for it! New to Network Configuration Manager ? Don't worry, attend the training and learn the tool thoroughly. Already a Network Configuration Manager user? Join us and catch up with our latest enhancements and new features. Attend the training and learn the tips and tricks to manage your network like a pro! Our two-part training series covers every Network
ManageEngine User Conference 2018 is here: Join us in Chicago for 2 days of invaluable training, and fun networking!
We'd love to see you in Chicago for the ManageEngine User Conference and Training on the 25th and 26th of October. It's going to be two action-packed days designed to help you get more out of your ManageEngine experience - with a track completely dedicated to IT Operations Management. Click here to check out all the details. What's in it for you: Talk to our experts in 1:1 sessions, and get all your questions answered Watch live demos, learn what's new, and participate in hands-on training Discover
Learn Network Configuration Manager on a broader level to manage devices effectively. Join the free training and make the most out of it!
Hello there, Hope you are all geared up for the 5th season's free training on Network Configuration Manager! If you are a new user of Network Configuration Manager, grab this opportunity and attend the training to gain complete knowledge about the tool. If you are already using Network Configuration Manager, then catch up with the latest enhancements and features to boost up your business. Attend the training without fail and learn the knicks and knacks of Network Configuration Manager! Our
Learn tips and tricks of using Network Configuration Manager more efficiently. Join the training and learn for free.
Hello there, We are back with our next series of free training on Network Configuration Manager! New to Network Configuration Manager? This is the best time to join this training and learn how to use our solution extensively. Already using Network Configuration Manager? We'll be talking about the new features and enhancements in the solution that would bring in more ROI to your business. So make sure to attend this session to get the most out of Network Configuration Manager. Our
Come, attend the Network Configuration Manager User Conference at Sydney & Melbourne!
We're happy to invite you to the Network Configuration Manager User Conference and Training at Sydney and Melbourne between April 30th and May 4th. [Register now] This two-day event full of in-depth and intensive technical training will help you make IT management simple, fast, and efficient—all focussed on Desktop Central. Trust me, you don't want to miss it! Here's what you can do there: Discover the latest ITOM trends, watch live product demos, and get a sneak peek of our product roadmaps.
Exported configs are not formatted to be readable
I am trying to export a config to a text file using NCM. (I click on the config, then Export Config). However the resulting text file is completely unformatted. Can this export be formatted into a readable format?
Steps to Keep Your Yahoo Messenger On At Startup
Yahoo has been working as one of the most dependable mailing platform that offers unlimited services to its users. With the technical support and services Yahoo Customer Support Number gives users immediate help that they require, especially for password related issues. As we all know, that Yahoo is one of the very interesting mailing panel with latest added features. The mailing is fun and attractive for all users. With the numerous benefits, users of Yahoo also come across technical problems in
Having trouble getting NCM to apply credentials to 4507R+E w/ Sup 7L-E. Credentials manager always fails telling me to specify a prompt.
I can discover the device just fine, but am having issues with NCM applying credentials. Since OpManager finds it as a CatOS device I am not able to specify SNMP as the management method for managing configs. When I log in to the switch via SSH I am dumped into enable mode by default. I do not have to enter an enable password. This dialog confuses the heck out of me. My process: SSH to management IP. I'm prompted with the following: login as: password: After entering username and password I am placed
Paloalto PA 500 Backup Failed
Hi Team , SSH configuration for Paloalto Firewall are valid and able to connect the device through SSH but when we add new device through Paloalto Template and enter SSH credentials it's verified all the credentials successfully but at last when we click on take a backup immediately , it failed. I'm not sure what is wrong with the configuration but we are able to get a backup of our VM-300 paloalto firewall through NCM version 12 but not able to get a backup of PA500 after its successfully verified
Backup of Cisco SF series switches
Hello! How can i make ssh sequence for SF series of cisco switches...with ssh credentials Here is the loging sequence... login as: user User Name:user Password:******** Switch#copy running-config tftp:// THANKS
Force10 S-Series - Backup Failed
I've added a few Force10 S55 devices to NCM and supplied the proper device credentials. But when attempting a backup of the device(s) I get a failure. When I open a terminal session through NCM, I'm able to access the device without issue. The odd thing is I initially set these devices up as Cisco Nexus devices and had no issue with the backups. Only when I changed them to Force10 devices did the backups fail. Any ideas? Thanks in advance for your assistance!
Free webinar: Network outages - Fight them off with configuration management.
Hello there! We have a free webinar coming up on 26th of July, 12 PM AEST & 2.30 PM IST! The agenda for the webinar will be: - Cost of network disasters - Causes of network disasters - Disaster recovery with NCM - Backups - Restore configuration - Change management - Compliance - Firmware updates - Configuration Mgmt challenges and its solutions Register here to join the webinar.
HP ProCurve 3500yl 48g. Problem with backup
Hello, We have HP ProCurve switches with stack access. When I configured credentials and tested it – it told me that all is fine but actually – backup failed everytime. Strange situations but in a first time my credentials works fine with telnet tftp, now it brokes. Problem that every time when I'am logging in to our HP 3500yl switches (commander) I have a promt to select the switch from stack and it is brokes backup-function.
Fortigate 60C Backups failing
OpManager 12.2 NCM reports backup failures for Fortigate 60C running FortiOS v4.0. Tested commands and they work fine and the backup appears to be successful at first but then the alert appears about two minutes later stating that the backup failed. Any assistance would be appreciated, Thanks.
Cisco WLAN Controller could not me backup
Our WLAN Controller is Cisco 5508 with Software version: 8.2.151.0，It's could not be backup by telnet-TFTP、SSH-TFTP or SSH only mode. How to change WLAN controller setting or need patch NCM ?
Does NCM support the Cisco MetroEthernet range of switches
I am having difficulties getting the ME3400 devices we have dotted around to backup correctly, i can see from the output that there command issues. Looking at the outputs that i get back it doesnt appear to be able to run the commands it is trying. ME340x Software (ME340x-METROIPACCESSK9-M), Version 12.2(60)EZ10
SNMP - FreeBSD remote distribution command
Hi friends, good afternoon. First I want to congratulate the channel on youtube. I have a linux CentOS server monitoring a PfSense (FreeBSD) via snmp v2, my doubts and how can I execute remote commands via snmp? Example: restart a wifi network interface, with the commands "ifconfig de2 down" and "ifconfig de2 up". Can you help me with that? Regards, Janduy Euclides
Free webinar: Configuration management done right - Prevent network outages and be disaster ready!
Hello there! We have a free webinar coming up on 28th of June, 10 AM PDT! The agenda for the webinar will be: - Cost of network disasters - Causes of network disasters - Disaster recovery with NCM - Backups - Restore configuration - Change management - Compliance - Firmware updates - Configuration Mgmt challenges and its solutions Register here to join the webinar.
Delete from NCM
I'm typing this in again, didn't see the question show up. I'm testing NCM in our OpManager and have 2 devices. I'd like to remove one of these devices (just from NCM), so I can add a different device. How do i remove a device from NCM without removing it from being monitored? I don't want to lose any monitoring data, but don't care about any related NCM data. So this would be remove from NCM, but not from anything else. How do we do this?
Automated Nexus 5500 Backups
When I attempt to perform a backup of my Nexus 5596 switches, they fail with the following error: copy startup-config tftp://10.10.10.21/1805_ConfigFile.txt vrf default ^ % Invalid command at '^' marker. Nexus-5596# copy startup-config tftp://10.10.10.21/1805_ConfigFile.txt vrf default Trying to connect to tftp server...... TFTP put operation failed:No route to host Nexus-5596# The reason it is failing is because the automated backup uses the default vrf. However, the Nexus has out of band management
Force10 config upload
I cannot get the Force10 switch to upload. When I configure the credentials all steps validate, but the config is not uploaded, message: Credentials are valid. But the configuration file is not uploaded to the TFTP server. Login to the device manually and verify configuration backup using the above set of commands. At the bottom it shows this command being used: copy nvram:startup-config tftp://172.16.50.65/2_ConfigFile.txt If I manually try to enter the command on my force10 switch I get this:
edit backup command
Hello: I have 2 brocade configured in NCM. I can backup the configuration, however the command that uses is "configshow", which does not show, among others, the zones configuration. To be able to perform all the configuration the command "configshow -local config.txt" should be used. Where can I configure the command to backup the configuration? regards
How to Search on google Acer Laptop or Computer Isseu?
Hey, Hi Friends Today I need to examine on Acer portable workstation related Problem or issue how to get by google arrangement it is simple Visit here Acer Customer Service is a Third Party Technical Service supplier giving master answers for the issues emerging in your Laptop, Computer, program, email, long range interpersonal communication accounts and antivirus program, etc. Just Now call this Acer Support Number08000465740
Deploy Configuration baseline to Collection problem
When I try to deploy Configuration baseline to Collection problem none of my collections appears to be selected . I can't figure out what is the problem ! anyone can help with that ?. I didn't find the right solution from the internet. References: - https://social.technet.microsoft.com/Forums/en-US/748090cb-167d-4601-908c-019be79de80a/deploy-configuration-baseline-to-collection-problem?forum=configmanagergeneral - Datacenter Management Solutions Video Examples
NCM 12 Cisco Catalyst 2960 switch backup
Hi all, So I have setup NCM on Opmanager and trying to take a backup of the switch. Added credential as Backup / SSH , below is the screenshot of the credentials. After that, I try to take a backup but it gives me the error Failure due to invalid 'Enable Password Prompt' value. I have tried many combinations using credentials without usernames and such but none worked. Any suggestion is welcome. Thanks
Notification Email multiple email addresses issue
Hello, I've just installed NCM 12.2 and tried to setup a Change Notification. But I could not add multiple email addresses. I filled in the "Notify Email to": user1@domain.com,user2@domain.com I received error "Enter a valid email address" while saving the configuration. Please advise. Thanks.
Active Directory Intergration with deviceManager
Hi, I am trying to configure ActiveDirectory(openldap) with devicemanager. Why i am getting this error? i am sure the ldap url is correct. 12:12:57:852]|[04-05-2017]|[com.adventnet.ncm.client.importusers.LDAPImportViewController]|[INFO]|[64]: Ldap Type : 2| [12:12:58:019]|[04-05-2017]|[com.adventnet.ncm.client.importusers.LDAPImportViewController]|[SEVERE]|[64]: Exception while adding LDAP Server info | javax.naming.NamingException: Cannot parse url: ******** [Root exception is java.net.MalformedURLException:
NCM Plugin for OP Manager 11.6
Dear All, We have running OP Manager 11.6 Essential Edition with Netflow Plugin, and we like to test NCM also integrated via plugin. We cant find the 5980 full plugin file in order to get installed in our system, we only can download an old one 5500 but is annoying to install one by one the updates to get 5980 updated. Can you please share full ncm link for 11.6 OP Manager version ?? Best Rgs Sergio
Next Page