regarding NBAR in Cisco
Dear Team, Can we configure NBAR in cisco 7609-S with RSP720-3C-10GE ( 7600-PFC3C-10GE) card? Actually i need to capture Skype, Viber and other application traffic in Netflow Analyzer? I tried to search in Cisco site but could not find it.
NFA Not updating
We just migrated NFA from one machine to another, and NFA is no longer updating. Is there something I need to do to redirect traffic besides the documents on migrating the database from one server to another?
NetFlowAnalyzer
Hello I just installed NetFlowAnalyzer trial version and it doesn't display anything. I need your help. Thanks!
Date and Time Stamp on User Activity Reports
Hi, I need to be able to report on individuals and how they use the net across our organization. I can produce a report which lists a users activity over a period of time but it doesn't display when each event happened. i.e. Johnny went on www.facebook.com at 10:15am on 23rd Feb 2010 Thanks, Graham.
Netflow graphs don't display at the Opmanager
Hello I've just installed Trial version of Opmanager and NetFlow analyzer for testing and everything works fine, but now I have a problem. At the Opmanager I add a link to Netflow and he's connected successful, but NetFlow Traffic Statistics at Opmanger didn't display anything Link below looks like that. http://netflow.home.local/netflow/jspui/consoleDash.jsp?iI=5000025&callP=true&stFull=1391415962685&edFull=1391502362685&rIp=x.x.x.x&speed=1000000000&callP=true&period=1 But when I change allP=true&period=1
Сan not see the traffic that generates the router itself
Hello. I have cisco 3921. Internet connected to Gi0/1 interface. Lan connected to Gi0/0 interface. On both interface i use 'ip route-cache flow' command. Traffic comes from Gi0/0 interface. Then traffic encrypt and goes to internet using gre multipoint 'dmvpn'. Netflow analyzer does not display gre/ipsec traffic on Gi0/1 interface . But unencrypted traffic on Tunnel and gi0/0 (lan)interface I see completely. How can I configure the router, so I saw all the traffic on the outbound interface to the
Unaccounted traffic ( above 50% of total traffic) in "yesterday report"
Hi! We have problem with version 7.7 (enterprise edition). When I see report traffic for yesterday, there's about 70 percent of all traffic displayed as "unaccounted traffic". I enclose file which shows this situation. "Recourd count" is set to 100 (in Admin Operations/Settings/Netflow Settings) At this moment statistics presented by Netflow are not very useful for us. I'm looking forward to hearing from you and your help in this issue. Regards Tom
IP SLA Monitoring Alerts
Hello Support, We're evaluating NF9 and its IP SLA functions. We have successfully implemented NF9 IP SLA in our lab. However, we're unable to receive alerts when we have shut down the destination interface. We checked your documentation and found the following: . Why there are no alerts from the device? You might not have received alerts from the device if the trap host is not configured in the source Router. Make sure you configure the routers to send traps to NetFlow Analyzer. Telnet the router
Ifindex Naming
I have multiple routers set up to be analysed using NetFlow. On all the routers i have multiple interfaces being monitored but they are all comming up with just IfIndex IfIndex1 or ifindex2 or something like that. In NetFlow i have tryed to set the Default Interface Name to all three different options (IfName, IFDesc, IfAlias) however it is still not working. All the other options in NetFlow are their default, i.e. SNMP community name = public and SNMP port is 161. Is there something that needs to
Cisco Application Visibility and Control available in NetFlow Analyzer 9.8.6 Build 9865 (Beta)
Hi Folks, We are glad to announce the release of NetFlow Analyzer 9.8.6 Build 9865(Beta) which supports Cisco Application Visibility and Control(AVC). We take this opportunity to thank all our customers and users for their feedback and the continued support. What is AVC? Cisco Application Visibility and Control is the combination of multiple technologies which found in the Cisco ASR 1000 series and Cisco Integrated Service router generation 2 (ISR G2). Cisco AVC allows network administrators to
Configure Monthly reports in Netflow
Hi, I want to fetch weekly and monthly reports from Netflow analyzer. But currently i am able to fetch reports from last 24 Hours only. Is it possible to fetch past reports more than last 24 hours? Regards, Inder
Conversation reports different fields
Hi, I'm looking at conversation reports a lot to understand traffic flows in my organization and create traffic flow matrix. I found out there is a difference in field shown for conversation reports: "Last 15 Minutes", "Last 30 Minutes", "Last One Hour" shows all fields "Src IP", "Dst IP", "Application", "Port" (as Source Port), "DstPort", "Protocol", "DSCP", Mapped fields and "Traffic". While other reports (except for "Custom Selection") shows only "Src IP", "Dst IP", "Application", "Port", "Protocol",
Netflow reports
Hi everyone I've little problem with reports. By default reports has only 10 position, how can I decrease it? I can't find it anywherer. Thanks in advance
View stats in more details
Hello Support, I wonder if you can help us, is there a way to view past stats for a selected host in more detail in the time dimension, for instance in average 1 or 5 minutes please let us know thanks Merv
Reporte de Facturación
Como habilitar el reporte de facturación en Netflow Analyzer?
disable netflow on Cisco ASA
Hi, I get these messages when trying to disable netflow on my ASA 5505. Can anyone tell me how to remove netflow? Thanks. AlzASA(config-if)# no flow-export enable ERROR: This command is no longer supported. Flow-export actions under MPF need to be removed to stop exporting NetFlow events. AlzASA(config)# no flow-export destination inside 10.59.1.53 2055 ERROR: flow-export: destination in use. Remove all references before attempting to delete.
MIkrotik & Netflow
i've a problem, to export traffic from RB MIkrotik -- > Netflow Analyser, Please help me, always unreplied
Customize Dashboard Question
I have several different companies that I am monitoring. I'd like to have a dashboard that shows the bandwidth utilization for each of those companies on one page. Is that possible?
Customize WEB Interface
Is it possible to change WEB interface?First I want to change login and logout page. If it is imposible i must find another netflow analyzer. Thanx
Volume based billing available
Hi, We are glad to announce the availability of a feature pack with regard to the billing feature over the NetFlow Analyzer Professional Plus Edition. This will include the following features: 1.Volume based billing. 2. Ad Hoc billing - Users can generate on-demand bills instead of having to wait for the end of the billing cycle for the bill to be generated (both on speed based billing and volume based billing). 3. Alerts when a specified percentage of the usage quantity is reached (ex: send an alert
Dashboard in an iFrame?
Hello, I have created a custom dashboard in Netflow Analyzer Professional Plus that I would like to embed into an HTML file using an iframe (or some other method) for use in a "Heads Up Display" screen that hangs on the wall. Can this be done? I would need to link directly to the dashboard and pass authentication as well. Thanks!
Unable to Capture Outbound Traffic
Hi, I'm using Cisco 7606s and GSR 12406 as my border. I'm unable to capture outbound traffic from the interface. Below is the config from my router. I have done a lil bit of research on how to over come this issue and it still i'm unable to resolve. interface GigabitEthernet1/10 description 20Mbps Ethernet link to ISP-1 (2nd BGP) bandwidth 10000000 ip address x.x.x.x 255.255.255.252 ip flow ingress flowcontrol receive on flowcontrol send on service-policy input INBOUND-UPSTREAM service-policy
juniper srx3400 Interface flow problem
These days, in the use of NAF 9.8.6. We found that the juniper equipment and the flow of the actual flow gap, only the actual flow rate of 1/10, or even less. Do not know what method can solve this problem, the following is our equipment configuration. forwarding-options { sampling { input { rate 100; run-length 9; max-packets-per-second 7000; } family inet { output { flow-server 192.168.21.112 {
Why choose Cisco ASA 5500 series as the best choice to protect networking
Through the Cisco MPF, the Cisco ASA 5500 Series brings a new level of security and policy control to applications and networks. MPF enables highly customizable, flow-specific security policies that have been tailored to application requirements. The performance and extensibility of the Cisco ASA 5500 Series is enhanced through user-installable SSMs. This adaptable architecture enables businesses to rapidly deploy security services when and where they are needed, such as tailoring inspection techniques
QoS Policy Creation
Hello Community, Can someone let me know if its possible to create QoS policies with NFA9? Cheers
Importing Existing Flow-tools Data to Netflow analyzer
hi, I have got some history Netflow data from flow-tools as in figure below, Can I import these data to Netflow analyzer? Thanks.
brodcade Huawei and NFA
Hi I want to ask you if i can monitor the Switch Brodcade Huawei by NFA and the same thing concerning Enterasys N7 if yes can you send me a steps to configuration Regards Ahmed
Monitor traffic in Stonesoft Firewall
Hi Can I monitor the trafic VPN in Stonsoft Firewall by Netflow Analyzer ? Regards Ahmed
Increasing user session timeouts ?
Since we've upgraded it seems we now get logged out every couple of minutes .. Where do I extend the user session timeouts?
Page Cannot Be Displayed - Distributed Edition
Hello: I've installed Netflow Analyzer as a collector on Server 2012 using MS-SQL Server. Everything appears to be running properly, but when I go to http://localhost:8080 I get page cannot be displayed. I did a netstat -na and do not see anything listening on port 8080. Any ideas on what I did wrong?
Netflow analyzer french version
Hi, I want to know on french version NFA under devices(dispositifs) /interface/Source or destination the trafic displayed on MB for example 17.25 MB see attacehed file so the MB means Mega Byte or Mega bits because the equivalence of Mega Byte in french is Megaoctet not Mega bits Other thing can i see the bandwidth of my adsl for example i used an 8 Mega bandwidth adsl so i want to see the 8 Mega displayed in NFA Regards Ahmed
netflow URL not loading
Hi Team, I have problem with loading netwflow.. recently DB server had been restarted lost the connection with netflow server. now the URL is not loading. any suggetions ? thanks shiju
Time difference
There is differnece between my System time and Netflow Analyzer. my system time is 9:28 pm but my netfow analyzer time is 12:28 and my router time is 21:28. where netflow analyzer pick the time and how to change the time
Netflow Behind Proxy Server
Hello community, We're re-evaluating NF9. Can someone please tell me if its possible to see traffic behind a proxy server. Currently, all communication to our server is via a proxy which uses port 8080. However, the actual connection to the server is on port 23. Because of the proxy we can't see the actual connection to the server on port 23. Is there a way to achieve this? Cheers Carlton
Netflow Behind Proxy
Hello Community, I'm re-evaluating Netflow. Is it possible to view conversations between a client that uses http to connect to the server via a proxy. For example, we have a client that accesses a server via proxy. The connection appears as 8080 because of the proxy, however the actual connection the server is on port 23. Because of the proxy we can't see the connection on port 23. Is it possible to see the connection on port 23? I hope I explained myself well Cheers Carlton
BCP
Just a general question about BCP (Bulk Copy). Why we need BCP in Netflow Analyzer? A detailed explanation is much appreciated.
After router replacement, interfaces not showing in NetFlow
Hi, I am using Netflow version 9.8.6 build 9861. I Need to Replace one router (hardware failure), after that, only LAN interface (fa0/0) show graphics at netflow. I Try delete router from netflow, then new router is displayed, with only 1 interface. Any Idea? Tans
Why cannot show the correct interface name,,hostname?
Why not show the correct interface name,hostname?As shown below: thx. chenchao
Enabling Cisco Netflow Protocol
Dears I have a Cisco 4510R switch which supports Netflow protocol as Cisco says ... when I am trying to configure the Netflow using the documented commands like IP flow ingress, egress ...it gives me unrecognized command for all commands. any help would be appreciated
backupconfig. erro.
When do I run "backupconfig",the fellow erro. java.io.FileNotFoundException: config_backup_ (系统找不到指定的文件。) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.<init>(Unknown Source) at java.io.FileInputStream.<init>(Unknown Source) at com.adventnet.netflow.dbutils.ZipbackConfiguration.unZip(ZipbackConfi guration.java:171) at com.adventnet.netflow.dbutils.ZipbackConfiguration.main(ZipbackConfig uration.java:57) The configuration file
Next Page