J2EE Web Transaction Agent- response time
Dear JAMon experts, First of all, i have to say that your monitoring solutions is one of the greatest monitoring tools I found so far! The fine-granularity of monitoring at different levels is one of the key competitive advantages. I went through the documentation and I was unable to precisely decide if it can server my requirements. You'd be able to quickly help answering this need. My application architecture is (Load balancer + JBoss 3.2.3 + MySQL 5.0.19). I use J2sdk1.4.2.19 and my application
Seperate Warning/Critical Alerts
I was wondering if there is a way to separate out warning and critical alerts so that if I check the "Execute actions repeatedly if the Health is Critical/Warning (until it is clear)" button under Admin -> Action/Alarm Settings, critical is the only state that is affected by that continual process. Warning would be able to only warn once if I needed it.
Problem Monitoring Tomcat 6
Hi everybody!! I'm trying to configure a Tomcat Server monitor in AppManager 9. I set all fields: Host Name, Port, Tomcat Version, User Name, Password, everything is "OK", when I click "Add Monitor(s)", the Status return "Failed". I click in "Diagnose the Problem?", but the diagnostic page shows: Ping Test -> OK Host Detail -> OK Service Status -> Return a Tomcat's Welcome Page in HTML code (I don't know why, this is my problem.) Authentication Details -> OK. The monitor server and the tomcat server
How to setup AppManager to run on SSL
I've looked in the forums and documentation, and I've found some info on how to do this for your other products, but could you please provide instructions on how to setup AppManager to run SSL over port 443, and how to assign a certificate to the server so that our Sys Admins can access the site without having to remote desktop into the server. Thank You, Kris
Question about sending e-mail.
Hi guys, I've been using AppManager and am having trouble with e-mail alerts. How do I do to AppManager send an e-mail alarm every 30 minutes for example, and the monitor has a poll interval of 5 minutes? AppManager correctly sends the e-mail when there is an alarm and I created an Alarm Escalation rule to send e-mails every 30 minutes if the problem is not resolved, but has not worked.Thank you in advance.
Problem monitoring Tablespace
Hi, I'm having trouble with AppManager. When there is an alarm, for example Tablespace alarming 10% of free space, it does not change, even if the space of the tablespace continue to decrease. If space reduce to 1% free, AppManager is still alarming as 10% free. I'm using version 10. Thank you.
Ping Monitor Real Status
Hi, I'm trying the trial version of ApplicationManager but i've this problem: I'm monitoring one virtual machine w2003EE with ping monitor. If i turn off the machine the status of ping monitor don't change, idem the health,availability, and the graph. The status of "packet loss" still remaing 0. I can ping this machine and viceversa. can you help me
Question about Add-on modules
Dear Sir, I have some question about add-on module, could you please help me to explain about these question? 1 what are sap server and sap ccms? what do they work? benefits from these add-on and differentiation between sap server and sap ccms 2. what is real browser monitor? what does it work and benefits from this add-on Best regards, Songtham
ManageEngine Applications Manager Training at just $299 - Hurry up and register!
ManageEngine is all set to host User Conferences in Boston, Washington DC, Chicago and Dallas. Boston - October 17 - 18, 2011 Washington DC - October 20 - 21, 2011 Chicago - October 24 - 25, 2011 Dallas - October 27 - 28, 2011 (Click here for the venue at each location) Technical Training & Certification at $299 and NOT $2995 ManageEngine Training Program covers in-depth technical training of products that we use. Originally, this training costs $2995 but you can attend it at the conference for just
Change default presentation sorting
Any way to make APM sort presented material by default in version 10.0. For example when showing Disk Utilization or when showing services (after selecting 'Add New Services').
Remove Inactive Databases from Sql Monitor
We have a database server that has been operational for some time. However, some of the databases have been dismounted. Appmanager now generates a critical alert for each of those database. How do I mark the databases as down or otherwise stop the alerts? Is it possible to rediscover the active databases without losing historical data?
Physical Memory of Application in Linux
Hi We are using Application Manager 9 version and we are monitoring the Linux Server But we have one Problem in Physical Memory Utilzation it shows Free RAM Disk Cache and not the Actual Free RAM we require this way as below total memory used = total memory (.1.3.6.1.4.1.2021.4.5.0) - free memory (.1.3.6.1.4.1.2021.4.6.0) - memory used by anything else than disk cache = total memory (.1.3.6.1.4.1.2021.4.5.0) - free memory (.1.3.6.1.4.1.2021.4.6.0) - memory used for disk cache (.1.3.6.1.4.1.2021.4.15.0)
Can't show the data on the Oracle Server.
Dear All, We can't show all the data of Oracle Server. An Oracle Server have configured with Cluster. We can access to telnet(port number: 1521) from APM Server to Oracle Server. And then we have tested the Oracle Server using Oracledebug.bat file. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- OracleDebug.bat 192.168.4.1 1521 system oracle SHMIS Discovery for database
connection between applications
Hi how can make a connection between applications manager and sap?
Hello About Linux in Application Manager
Hi We are using the Application Manger 9 for monitoring the Linux server. We are monitoring through SNMP But we have one problme in Linux that is of RAM use in the Physical Memory Utilization(%) it show 93 % usaged RAM but it in General it is of Disk Cache of Linux it is showing. We Require Free RAM like total memory used = total memory (.1.3.6.1.4.1.2021.4.5.0) - free memory (.1.3.6.1.4.1.2021.4.6.0) - memory used by anything else than disk cache = total memory (.1.3.6.1.4.1.2021.4.5.0) - free memory
Physical Memory Calculation
Hi does any one know how is actually the Physical Memory Calculated in The Linux server in Application Manager 9 version Reagrds Narendra
Linux memory utilization
I have a server running out of memory but I can't get an alert from app manager because it shows the memory usage at 5%. here is the free command. You can see that 80% of the memory is in used buffers. but app manager is still showing 5%. This is version 8300 free total used free shared buffers cached Mem: 8059408 6104464 1954944 0 14532 5615964 -/+ buffers/cache: 473968 7585440 Swap: 4658840 4398376 260464 Ray Carlino
Help for Proxy WMI and service of DCOM..
Good morning. I'm new to the community, my Name is Ivan Ruotolo, I'am writing to ask if you can tell me how can I monitor a service via DCOM ManageEngine (application manager). And another question ... I would use the Application Manager and use it as a proxy for agentless WMI to manage all of this proxy, a fax like Nagios, with its proxy nrpe_NT .. Someone more experienced than me could give me some manual? Thank you and good job .. P.S. The environment and microsoft totally.
How to montitor HornetQ JMS server from application manager ??
Is there a way we can monitor the HornetQ JMS server using jmx ?? We have enabled the jmx from hornetQ. I am able to connect to HornetQ from remote machines by using jconsole. But unable to monitor from AppManager. Thanks, Satheesh
how to add linux script by script monitoring in manage engine?
I have created simple script in linux to check udp packet stat..with netstate..want to monitor it by manage engine using script monitor ..how to use it?
[Webinar]: What you need to know about Applications Manager Version 10.0
We recently released Applications Manager Version 10.0 and want to demonstrate to you how the new features work. For this purpose, we are organizing webinar sessions where we will discuss release 10.0 in depth. There are 3 sessions to be held this week.
Adding managed servers to rebuilt admin server
I have 2 managed servers and an admin server. The admin servers hard disk became corrupt and the server has to be completely rebuilt. The new admin server has the same name and IP address as the old server. Is there any problem in adding back the existing managed servers to this new admin server ? Any help would be graetly appreciated. regards, Brendan
Applications Manager 10.0 released; includes end user monitoring enhancements, vCenter support and more
ManageEngine Applications Manager 10.0 is now available for download in our website. The highlights of this release are enhancements to end user experience monitoring and automated mapping of VMware resources through the vCenter server. Here is a quick look at the new features/enhancements in 10.0: End User Experience Monitoring (EUM) add on introduced: The 'Real Browser Monitor' add-on has been rechristened as 'End User Monitoring' add-on with enhancements that help it go beyond real browser monitoring.
Manageengine Application manager
Good Day , Thank for this product it surely fills a gap in the support of databases. However my biggest problem is that I cannot uninstall it . It looks for Directories that don't exist . You cannot even uninstall it witht he Windows unistall utlities . Do you have any fix for this problem ?
Combine 2 applications manager to 1
Hi there, At the moment we have 2 different applications manager installations on 2 different servers. Both installation do have a lot of monitors. The idea is to combine those 2 installations to 1 and we want to migrate the monitors of installation 1 to installation 2. Is there a simple way to do this by exporting/importing the monitors? Can we extract the data from the mysql-database, so we can do a sql-import? Otherwise we have to create all monitors from installation 1 by hand on installation
Crashed WebLogic server causes AppManager checks to get blocked
Hi, We use AppManager to monitor various WebLogic managed servers. The application which was deployed in one of these WebLogic managed servers got stuck in a deadlock (application issue) and other managed servers which were part of the same WebLogic cluster also crashed due to this (with out of memory errors). Strangely enough the java process (the managed server) still runs at operating system level. According to netstat, this process is still listening on it's webserver port. When a connection
How to copy Actions, tresholds, users...
Hello guys, i am using AppManager and i have one question. i am monitoring a DC, but we moved to another DC and we will get new IP's to the servers. I am going to start a fresh instalation of AppManager and i would like to know how to copy the DB from the old instalation to the new one, but i dont wanna the monitors. I wanna copy the Actions, the tresholds, the users, everything but the monitors. How could i do that guys? Att.
Replication Stats for Active Directory Service
Hello Anyone knows how many time is required for AppManager to show the replication stats for AD? Is neccesary any setup to get this values. We have 2 domain controllers. Regards Orlando
MQ Monitoring fails after Update to Version 10
After AppManager Udate from Version 9.2 to 10.0 our Webspher MQ-Monitoring fails with the following Error: Couldn't establish connection.Reason Code:2195(MQRC_UNEXPECTED_ERROR) Regards Dieter
Total number of files in a particular directory
Hello, I would like to add a monitor for the total number of files in a directory on windows 2003 server. With "File/Directory Monitor" monitor it is possible to monitor the total size of a directory but I need the total number of files. I believe that it is possible because in the Detail View appears the metric but in blanks. What should I do? Thanks Hugo Ramón
Error # The interface is unknown.
Today I see "Error # The interface is unknown." in our build of Appman 9. Last night there were issues with our ESX hosts, this server wasn't affected by this issue but since then we see this error. I tried removing the monitor, it won't allow me to add it again due to this error. The network settings stayed the same so that's not an issue. Network traffic is passing through the system. Anyone have an idea?
I have problem Website Statistics in IIS Monitoring (don't show our websites)
After add IIS monitor width WMi mode on any server Web statistic show (Please wait for this Data Collection to complete and refresh the page after few moments to view Website Statistics.) but can't show any time our website
SAP CCMS Monitors - change parameters
Hi I have a sap ccms monitor added in apmanager and i need to modify the hostname of this monitor, it is no possible, the only parameters that i can change are DisplayName* User Name * Password * Polling Interval It is very important for me to change this hostname without delete and recreate the monitor because it has a lot of alarms configured. Can you help me please?? Thanks in advance Manuela
Any monitor: When in distributed architecture (multiple Apps Manager pollers) Ability to view as-polled data on the the main reporting server.
Any monitor: When in distributed architecture (multiple Apps Manager pollers) I can only view as-polled data on the poller server, not on the main reporting server. I would like to have the ability to view this on the admin server.
How to Setup a GlassFish Cluster Monitor
Hi there, we have a Glassfish Cluster ( 1 DAS - 2 Nodes on two different machines ) Is it possible to set up this in a clusterd environment (to check if DAS, Nodes, Loadbalancer running)
Problem with integraton of vCenter
Hi, I would like to add our vCenter (4.1) in the latest AppManager, unfortunately it doesn't work. I can see in the vCenter log, that AppManager is trying to authenticate with username@127.0.0.1. Maybe this is the problem? I already checked the user/pw several times. Thanks in advance Martin
problem of J2EE Web Transactions
Hello, I have trouble adding Monitor J2EE Web Transactions, please have a look. the error message is : [Service is not running. Web Transaction Agent may not have been deployed. Root Cause: Service port 55555 not accessible from lzz ] Now WebTransactionAgent.jar is in "C:\apache-tomcat-6.0.29\WebTransactionAgent.jar" and in my catalina.bat(C:\apache-tomcat-6.0.29\bin\catalina.bat) i write: set JAVA_OPTS=%JAVA_OPTS% -javaagent:C:\apache-tomcat-6.0.29\WebTransactionAgent.jar rem ----- Execute
dollar tags
hi deras i use application manager 9 and in its document explain that we can not use $HOSTNAME and $HOSTIP fot ping monitor and URL monitor in our actions,so i have an action ta it use for hosts alarm and ping monitor and url monitor and DNS monitor and i use fot that action $HOSNAME that it is usefull for hosts alarm and dans so what do i do instead of $HOSTNAME and $HOSTIP in ping and url monitor? because i want to have ip address in my emial that send for my action,what do i do??? tanx so much
Performance Metric Widget
Hi, I have a problem with the Performance Metric Widget in a custom dashboard. I'm monitoring a custom monitor fetching numeric values through a script. The widget can show a graph when "Show polled data" is selected but if I for example select "Last 30 days" nothing is shown, it say "Data not available for the given values". If I view the monitor itself I can see history report like normal, and select both "Last 7 days" and "Last 30 days" and problably all the rest as well. So how can I make the
Sceduled disk usage reports come through empty
running AppManager 9 build 9500 on Windows Server 2003 R2 Enterprise Ed. We have a scheduled report to tell us the "top 10 Disk Usage" offenders on our network, but every day when the report runs we get two PDFs that say "No data available to generate report for specified time period. Even if I try changing the time period to 1 week or 1 month, I get the same result. I've also tried recreating the report from scratch with no luck. What am I doing wrong here?
Next Page