Timer Jobs not pulling through in Applications Manager
Hey there I have an issue with our SharePoint monitors in App Manager where the Timer Jobs are not pulling through. I have Powershell Mode monitoring enabled and everything else pulling through fine, besides the Timer Jobs. I mentioned this in a previous ticket, request ID #49000007893914 Info: 1. We are running SharePoint 2013 across our 4 SP servers. 2. Please find screenshot of monitor attached, as well as the App Manager build. Please help, need to get monitoring on this asap. Are there any other
Modify the interval of Monitor Group Template Dashboards
Hi mods, Any 1 has any idea how and where can i modify the intervals of a monitor group template dashboard? I need to switch it from 2 day interval to 7 days for report generation. I ve tried looking into "report Settings " , "Schedule Reports" and checked
(Admin) Alarm from the Applications Manager
Dear team, Currently we're having new issue is " Connection refused. The Managed Server dcemsprobe06.canadiabank.com_9090 may be down. " Please kindly support us to fix as soon as possible. Thank you,
Not able to collect the data for Network Interface attribute using SSH mode
Hello. Good day. Your support to check this reported error on a LINUX RHEL 9.4 monitor. It indicates that it cannot collect data from network interfaces. Attached are a couple of screenshots of the error. Thanks for your help Regards
"No Data Available" shown for KVM Guests Application Manager v17
Using Application Manager v17 to monitor kvm guests (Win11 and Rhel). qemu guest tools have been installed successfully on guests. Monitor for each vm can not retrieve any disk information. Is there additional configuration that is needed to retrieve
encounter SSL Handshake Error ManageEngine Application Manager After Upgrade to build #170004
hello I am using application manager 17 and build number 16423. I have no problem with this version. But when I upgrade to build #170004, I encounter SSL Handshake Error in all https services. I followed the instructions on the site, but the problem was
Monitor QSYSOPR error messages AS/400
In Application Manager, I have had error in QSYSOPR that are not triggering that the system is unhealthy. I believe I could be missing an alarm for this. How does one go about configuring this? Thanks,
POST method to elastic
Hi Everyone i need litte help, i try to configure manage engine application manager with elastic, i want to tell elastic when some server get alert from manage engine it will send too alert to elastic. i try use webhook/rest api, but still error can u
Monitor all automatically started windows services
I want to monitor Windows Services. My goal is to monitor every service that is in start mode "automatic". When adding installations on a server the additional services (automatic start mode) should automatically being monitored by AM. Is this possible? Should i create a template with wildcards? Is this even possible? Do any of you have ran into this and found a good solution? Kind Regards, Eric
New issue intrduced lately on Amazon Linux 2023
We have a Linux monitor that creating an alarm regarding collecting data from NIC. Any idea what is the command it is using to collect this kind of data ?
Error on Application Manager
WrapperManager: Initializing... jvm 1 | skip OS compatibility check : false jvm 1 | exitcode : 0 jvm 1 | OS Architecture : 64 jvm 1 | createAPMStartupDetailsFile() :: apmprocessid already present in file : jvm 1 | TMP-UBUNTU2204LTS-DEV: TMP-UBUNTU2204LTS-DEV:
Aplication manager
hii can anybody help my case? because i get this error when i run the application manager and after that i don't get akses to web server i think i should get http://ip:9090 or http://hostname:9090 can u guys help me?
How to add dynamic query parameter in URL monitor
Hi Support, Is it possible to add a dynamic query parameter like timestamp to a URL? E.g. https://www.domain.com/page.html?t=timestamp where, t is query param name timestamp is dynamic Epoch Unix Timestamp, e.g. 1707204695 Can anyone guide me on how this
Multiple LDAP Monitors to the same LDAP Server
I'm currently evaluating Applications Manager for our org and we have a specific need of monitoring some critical ldap servers that we're hoping Apps Manager will cover for us. These are not standard AD ldap targets. They are Optimal Virtual Identity
An error was reported when APM added VMware Horizon to connect to the server
I have referred to the prerequisites for adding connection proxy monitors and APM hosts. Prerequisites for Applications Manager - Applications Manager User Guide (manageengine.com) When I added a monitor to APM, I reported an error message as shown in
APM Linux v8 - Not able to collect the data for CPU,Disk,Memory attribute using SSH mode
Hello, Please, could yo help me sharing with me which are the package/commands that are necessary to collect the metrics of operating system. I have this reference: https://www.manageengine.com/products/applications_manager/help/server-monitor.html#commands
Physical Memory don`t show the number of mem
Hi PS, I have got two problem about PHYMEM and PHYMEM TOTAL don`t show the number of memory, it just show the percent memory. Please help me.
.NET Core monitor is not showing data
Yesterday I installed the monitors for both .NET and .NET Core to the web server hosting most of our apps. The data returned is not what I expect: Only one .NET app is listed in the APM Insight Overview page, despite there being traffic on multiple .NET
Not able to collect the data for CPU attribute using SSH mode on RHEL 8 with OpManager
Hi All, I try to monitor a server on RHEL 8 with OpManager but the CPU not show metrics: The error is "Not able to collect the data for CPU attribute using SSH mode" I installed the package: yum install redhat-lsb-core And sar command: root$sar bash:
Resolved |Warning colreorder requires datatables 1.10.8 or greater | always when i enter to the website
Hi, I did an upgrade to version 16, but after that i have got an issue when i enter the website or refresh it. Anyone have the solution ? Thank you :)
postgresql health monitor is unknown
As you can see from the picture, the health of postgresql monitor is unknown I tried to stop and start the service but the issue still remains
The best high availability solution for App Manager & Op Manager themselves
Hi guys. Could any one please let me know that, what is the best high availability solution for App Manager & Op Manager themselves. First of all, it is so important for me to make a high available monitoring for our company, and when one App or Op Manager monitoring goes down, the other one could work instead of it. Thanks in advanced.
Manage Engine Applications Manager service not starting.
We are using "Application Manager of Manage Engine 15". For the last 4 we are unable to open it. When we try to open it, "unable to connect" shows on the browser screen. When we start it from the services list it shows running but after a few seconds
HTML widgets
is it possible to embed HTML into widgets/dashboard views in the Application manager
Connection Refused for HTTP monitoring - Application Manager
I've setup a simple URL monitor but receive Error : 5301 - Connection refused: connect even for http://google.com. We are behind a corporate proxy, but I couldn't see where in admin I may need to set that up. Any assistance would be greatly appreciated.
thesholds against multiple elements
We are now monitoring a 3 node cluster where the 3rd node is Asynchronous so "Data Loss" is its normal state as it is not set for automatic fail-over. The threshold "MS SQL AlwaysOn - Availability Database Failover Readiness" reports this as a failure
APM Plugin MSSQL Server Network error IOException: Could not create socket
Hi, could you help me with this message. The database monitor was working good. But days ago send the message: MSSQL Server is down. SQL Error : Network error IOException: Could not create socket I edit the monitor and test the credential. I checked
Interger Values not correctly displaying
I have created a script monitor with mapped numeric values. The problem is that I have the values set to integer type however Application Manager keeps adding in a decimal and what looks like scientific notation to the value field which I don't want.
APM v15402 Not able to collect the data for CPU,Disk,Memory attribute using SSH mode
Good mornig, Please, you could support me with the issue "Not able to collect the data for CPU,Disk,Memory attribute using SSH mode". I added recently 14 linux monitors and all have the same message. I had check the commands used to obtain the información
Extrat Date in Date format from values stored in Database
We are using MS SQL server as repository to AppManage database. AppManage is storing datetime as a bigint in SQL server vs a regular datetime field. Please recommend the function that can be used to convert this number as valid date as part of regular SQL queries. Following is example of one of the fields that we need to see as Date in our SQL query results for custom reports AM_ManagedObject COLLECTIONTIME = 1281061878306
Windows Server CPU Utilization % always sends Idle time attribute is 100% alarm
Hello, Would anyone have resolution for Windows Server CPU Utilization % always sends Idle time attribute is 100% alarm? The alarm triggers because the Idle Time % of the Windows server is always around 100%. Please advise of anyway to get around this
Linux Memory Utilization
Hi, in my application manager show 99% physical memory utilization, when I check on the server it was just using 6% memory. After that I check using this formula Memory Utilization (%) = 100 -(((MemFree + Buffers + Cached)*100)/maxValue) some example
Can´t start Manage Engine Applications Manager
Hello there, i´m trying to install Manage Engine Applications Manager (ManageEngine_ApplicationsManager_64bit) on windows 10, but when it finishes, i can´t get to run. When i manually run: "startApplicationsManager.bat" (as administrator), i see a new
Managed Engine - jsonfeed.do?method=createMonitorGroupFeed
Hello there, We use the jsonfeed.do JSON FEED calls to get information about our monitor groups, but since our upgrade of the service, the service stopped working. When I check the response from the server, javascript gives an error on what is returned:
blank content in Opmanager plugin
Dears, Hi, good time based on below screenshot, we have problem in opening opmanager plugin from other clients (IP or DNS) faced blanks contents while there is no issue on opmanager server and each tap and feature is working properly.
show VMs status in one dashboard
Hi dears, I have installed the plugin for horizon view connection and all of the view servers have been added to customized dashboard but I need a live dashboards for all VMs status in view connection broker. is there any solution to have one dashboard
MS SQL Missing from Add/Discover in Applications Manager
We recently installed App Manager and while looking to add our SQL Servers: MS SQL/SQL Server is not an option in the list. Are we missing something? Should we be adding via a different method in Applications Manager?
Action: Edit Action : Execute Program "$RCAMSG_PLAINTEXT" truncated
Hi, I attempted to create an action for alerts in ApplicationManager. The Action is to execute a program with the $RCAMSG_PLAINTEXT variable as an input argument to the program to handle. Format is like below: myalertprogram.exe -n "$HOSTNAME" -s "$SEVERITY"
How to add OAuth provider correctly
Hi, I have an internal rest api that accepts oauth, and when I attempted to request add oauth provider for an alarm action, there are some config items that I cannot be sure: the rest api accepts token request in this requirement, illustrated in curl
Monitor IIB - IBM Websphere Message Broker:
Hi, I am using IIB 10, from the help card I found that: The following jars are required to monitor broker ConfigManagerProxy.jar ibmjsseprovider2.jar I can not find ConfigManagerProxy.jar because of from IIB 10 we no more use that file. Please help to guide next step. Thanks.
Next Page