Rule Engine Add Notification Profile.
Hi Guys can a Rule engine add a notification to all devices when added to opmanager based on criteria? Thanks, Stephen
Notification Profiles Report
I have been asked to create a Notifications Profiles Report both by profile or device that includes the "criteria selected" for each device. I have searched the forums and have found other reports, but not ones this detailed. Any help would be great By Profile Example Profile Name, Action, Device Name, Selected Criteria, To Email monitor, Send Email, server101, Device Misses 3 Polls, ithelpdesk@company.com monitor, Send Email, server101, When any DNS Service is down, ithelpdesk@company.com monitor,
Extreme switches: EAPS info and custom dials
Hello! I have a few questions concerning Extreme switches that are in EAPS ring. First questions is it possible to make a table or dial to a device snapshot that includes info from the mib? (attachment: eaps_info) That way it would be easier to get EAPS information from the switch just by looking at device snapshot. Second question is: How can I get a dial showing for example cpu utilization? (attachment: cpu_util) I understand it need some tinkering with the "opmanager_snapshot_dial.xml" file, but
Unable to create a backup on MSSQL
I installed OpManger 11 64 bits and MSSQL server 2012 64 bits on a windows 2008 64 bit server. Im trying to create a backup of OpManager, but I got this message: C:\ManageEngine\OpManager\bin\backup>BackupDB.bat -mode configdata file:C:\ManageEngine\OpManager\conf\ui.properties [OpManagerUtil] COLUMNSTORE INDEX set is false Please install MSSQL native client in OpManager server and copy bcp.exe and bcp. rll files from MSSQL Server to <OpManagerHome> directory and then try again. C:\ManageEngine\OpManager\bin\backup>BackupDB.bat
Monitorize Python Script
hello, we need to monitorize a Python script, located in one directory. the result of the script is this: is there any way to monitorize this? BR
Are Avaya devices supported in the current build for OpManager
We have a client which is trying to monitor their Avaya Devices but the device templates or the vendor for Avaya Devices is not listed in the application. We also tried to apply the proper MIBs to be able to discover these Avaya devices but we are unable to upload them properly. Are Avaya devices supported in the current version of OPManager 11400? Awaiting for your prompt response
WAN-RTT configuration
Hi I look on the demo http://demo.opmanager.com/ but can find a way to see how WAN-RTT is working. I don't see where I can configure Wan Monitoring. Could you help to open my eyes) With best wishes, Dmitry
SNMP v2/v3 can't work on ipv6 address
OpManager version: 11.4 (11400) do snmpv2/v3 to monitor Switch Device via ipv6 address. but when we use wireshark check OpManager to Swith, we found OpManager via ipv6 address environment, it's snmp can't sent get-request to Switch device (add device, or find network). When we change from ipv6 enviroment to ipv4, snmpv2/v3 will work normally.
Notification Profile
Hello, Is there a way to list all monitored devices, that has no notification profile attached? I did miss some alerts, because no notification profile was attached, but to check all device by hand is a lot of work! I am using OpManager 11400
Juniper SRX and custom queries
Hello, I am trying to get some specific information from an SRX3400 for the purposes of graphing. Primarily I want to graph the amount of flows. What I would like to graph is valid session, invalid session and sessions in use. I have OIDs for some of these. Juniper has a KB article and PDF. http://kb.juniper.net/library/CUSTOMERSERVICE/GLOBAL_JTAC/BK26199/SRX%20SNMP%20Monitoring%20Guide.pdf Where in the software do I shove in a specific OID for the purposes of graphing? Thank you all for your help.
Lost sysname as display name after network fault.
Hi, after network fault, i lost for many devices the display name, not anymore sysname but it appears the ip address. Why, how can i fix it ?? thk
How to recover admin password in OpManager
Hi, For some reason that we don't know we can't access in the opmanger with the Admin user. We haven't another user and we need to recover the password. How can we do that? We have OpManager v10.2. We have urgency! Kind regards, Rita Azevedo
View Associations Blank screen
Hi, i have a problem, when i click on Notification Profiles - View Associations a blank screen appears http://server_name/admin/ShowAssociation.do?methodCall=getDeviceProfile&firstTime=true I use opmanager 11400 on windows 2008 r2 how can i fix it ? thk soo much.
Default alarm thresholds not published for OpManager
I need to know what the default alarm(alert) severity is for the following: Interface is having problems Windows Service is down Hardware in problematic condition I have seen the KB article concerning polling and service/URL down events but I need the above details as well. If someone could respond quickly as I need to provide a report ASAP. Thanks, BNDT12
BackupDB.sh gives: "jdbc.BackupException: Error writing data to file."
I can't backup my OpManager with the script BackupDB.sh provided. Before the update to 11300 is worked. What I get: [12-22-2014]|[08:53:44:236]|[SEVERE] : jdbc.BackupException: Error writing data to file. at jdbc.BackupDB.dumpDataToFile(BackupDB.java:157) at jdbc.AbstractBackupDB.backupDB(AbstractBackupDB.java:80) at jdbc.AbstractBackupDB.doBackup(AbstractBackupDB.java:438) at jdbc.BackUpImpl.backupDB(BackUpImpl.java:72) at jdbc.BackUpImpl.main(BackUpImpl.java:210) Caused by:
Solarwinds vs ManageEngine
Hi, does anybody tried Solarwinds and is able to compare it to ManageEngine? Solarwinds has a great web interface and the new monitoring agent is a wonderfull feature, at least on the datasheet. I tried to install it and it was a nightmare!! It requires MSSQL and IIS already installed. It installed at least 6 or 7 different components. It create several windows services. It's not cleat what I have to do to restart the software. It didn't work so I tried to re-install it. I searched a way to uninstall
WRTT configuration issue
Dear Team, I have an issue on WRTT configuration, I have configure the WRTT to collect the date over the Cisco Routers and after two three day the data is not collected on the OPmanager dashboard.. and suggested solution? Thanks in advance
Xen Server
i've saw that there is a opmanager beta version whit Xen Server monitor, when it will be in production?
Opmanager & Microsoft Exchange 2013
Hi all! Exchange 2013 was released many months ago ... but OpManager does not know anything about the Microsoft Exchange 2013 Why?? When will be added support of Microsoft Exchange 2013 ??
Multiple vulnerabilities in FailOverServlet in ManageEngine OpManager
Please advise when the posted vulnerabilities are expected to be resolved. https://raw.githubusercontent.com/pedrib/PoC/master/ManageEngine/me_failservlet.txt
StartOpManagerClient
Hello, I am facing trouble while trying to start opmanager client through web client i am getting error: this page can not be displayed. i tried StartOpManagerClient.bat and it showed me error check whether the server is running then i tried StartOpManagerServer.bat and it showed me that license is invalid although it is valid and it was working just 2 days ago then i tried another port (WMI - 135) while using StartOpManagerClient referring to the below link https://support.zoho.com/portal/manageengine/helpcenter/articles/port-used-by-opmanager
Thresholds in device templates do not retain values
I am on 11400 and have created a new device template, copy of Windows 2003, and removed all monitors to start anew. After adding monitors, I can set the threshold amounts the 1st time but if I try to edit them later, after applying to devices, the behavior is strange. If I have 7 monitors and I edit them all and save, all 7 assume the last settings I changed! This is useing the 'Edit Thresholds' option in the template dialog. To correct this I have to remove all monitors and add them back, once at
Vecenter cant be added
Hi I added Vcenter in OpManager but Virtualization and home tab are empty and can see the vm host and Microsft server only in Network Regards Ahmed
Opmanager
Opmanager stops showing monitor information, some links to routers are orange for days and then blue. Information in Graphs stops and a few days later they started to show information again. Verison 11.3
Server down, but OpManager only states "Attention"
Still testing the different states of the OpManager gets when a server has problems. So I turned off one of our servers. This is all I have seen in my e-mail in the last 12 hours Message: Device not responding: Probably down or busy Device: Playfield Category: Server Error Condition: Attention Generated at: Jun 09,2008 04:09:22 PM If a server dies, the status should be Critical! Tested SNMP in the same method. When I kill off the snmpd service, OpManager assumes all services are in their last state.
compile MIB file?
Hi there, Is OpManager capable of compiling MIB files? http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-GENERAL-TRAPS Thanks.
Feature Request - Asset Details Extended to list UEFI or BIOS
Below is a link to powershell method(s) to determine UEFI or BIOS. I would really like opmanager to include the UEFI / BIOS information, and further would like to run inventory reports based on UEFI, or BIOS. In the next couple years I'm certain enterprises will be "mostly" UEFI, but this is still a transitional time with so much hardware still being BIOS-based, and many VMs primarily being built as BIOS. Why I care... When considering disaster recovery, or business continuity, the first thing I
how to export list of devices
Hi, how can i export list of all devices on csv ?? file.csv like : DeviceName/IP,DisplayName,DeviceType 192.168.100.1,Itben,test 192.168.100.2,Itben2,Linux Thk
Integration Opmanager with ServiceDesk Plus
Hi, I´m having a problem integrating opmanager with servicedesk plus, I try to do the following actions but it doesn´t work: 1. I check if the server that is hosting the ServiceDesk Plus is running. 2. I change the username and password to: username: domain\vanilson pasword: vanilson Does anyone know how to solve this problem??? Best Regards...
List of devices with suppressed Alarms
Hi Is there a possibility to get a Report / List of all devices with the status of suppressed alarms? Thanks
HyperV host 2012R2 not adding as a hyperV host In Opmanager 11400
We have a Windows hypervisor host running 2012r2. When Opmanger (11400) discovers that server it does not discover it as a vitual device but as a server. I've tried: Rediscovering Deleting the device and rediscovering Deleting the device and adding it as HyperV host and none of those options work. It also seems that we're having some problem displaying views in a timely fashion. For example, an all device view (for 81 devices) takes 5+ minutes to render and the business view widgets (on the splash/home
Passing Parameters to a PowerShell Script
Hello I have a PowerShell script (defined in OpManager as Script Template), as mentioned in the help I can pass the IP and the name of the device using the command line (cmd /c powershell.exe -ExecutionPolicy Unrestricted .\${FileName}.ps1 -serverIP ${IPAddress} -serverName ${DeviceName}) My script will be called by different devices, the question is, can I pass other parameters to that script. For know, I have to copy the script for each device, and in each version I am specifying different values
Servers updated as snmpnode
Good Day, I do not know what happened, but all of our server types has been updated to snmpnode, so when we click on a server name we get the error message, unable to find object I have to go to admin and discover the devices again, then it gets the correct details again, but the availability graph does not display. Please assist this is really urgent, please see attached doc.
Workflow deleting files using wildcard
Hi, I am creating a workflow which must remove the log files in a certain location on one of the servers we monitor. I only want to remove the .log files, and created a delete file step and added the following code inside of it: E:\New Folder\*.log I get the following error when I try to execute the workflow: Task failed, output is :
And that is all. If I add a specific file name it works correctly. In the post titled Wildcards in workflow it was stated that wildcards will be added. Am I doing something
Is possible send custom fields with different OID on SNMP Trap profile?
Hi, Is possible send custom fields with different OID on SNMP Trap profile? I'm testing the integration of OpManager with other system and when I put the custom fields of the monitor, all they have the same OID. Nilo
Move OpManager to new server
Hi, The current OpManager on Windows Server 2003 Standard Edition SP2, SQL Express 2005 & Op10. I've setup a new server Windows Server 2012 R2 Standard, SQL Express 2014, Op11 (i setup this before going through your guide..) May I know can i still follow the backup & restore guide now? Is there any other way for me to migrate the data in the old Op to the new Op? Thank you for the help.
edit monitors?
Hi there, How to edit some non-standard monitors: MSSQL and Active Directory monitor? thank you.
issue with Firefox
Hi there, OpManager 11400 Firefox 35.0.1 Note: I'm using the old interface Using Firefox, I can't click the link under Maps to the following: Business View Rack Builder 3D Floor Builder I managed to get to Business View from Home (there's a sample business view already there). When creating new view, I tried to use my own image by clicking the Browse button. After selecting the image (it was .JPG), it didn't show the image. If I go through with that, adding items etc, the background will be what
Device availability shows down but response time indicated is 001ms and the server responds to ping
Hi, We have an issue whereby one of our servers is showing Down for the last 7 days, however, the server responds to ping from the OpManager host and OpManager indicates a response time of 001 MS. Additionally the server can be pinged from the ping tool on the server dashboard. Please advise as to how to resolve this issue if possible. Kind regards, Dean
Rhel ISSUE: Does not run after successfully installing!
Dear community, we have been trying to install and run the latest 64 bit ManageEngine on RHEL 6. Everything goes well in installing the latest in the default dir, but at the initial sh StartOpManagerServer.sh, which created the initial SQL tables, we rerun it and it just stops after stating "This OpManager has been licensed to a Free User", as shown at the screenshot. How can we debug this? Which log files should we take a look at? Thnks a lot in advance. PS: We are trying to buy the product, after
Next Page