Custom Monitor Issue
Hi I have custom monitor that test mailq size. I have tested the the SNMP with the following command from the server: snmpwalk -Os -c PASS -v 1 HOST .1.3.6.1.4.1.2021.8.1.101. That works fine. But when I test the monitor I get: The Monitor did not respond to the test request The Opmanager is running on Linux. Thanks in advace. Ryan
Instant SMS toolkit
Is there a way to use the SMS toolkit with a CDMA phone? thanks -
error and white screen
I am setting up opmanger and i am trying to monitor servers over a VPN. Discovery find the servers, but when I try to change using the device type button I get a whote screen with the word error on it. Tha is it. Any ideas? Lucky
switch port mapper
is it possible to add more than one router to the switch port mapper? i have vlans on my switches which are routed by different routers. due to this not all mac adresses are mapped to their ip(because i can only add 1 router address) stieven struyf
Op Manager 7 -- not able to set thresholds
If I try to set a threshold on a disk partition, no threshold is set. I can set a threshold on overall disk usage, but not on a particular partition. Since the main use for us is monitoring servers to ensure no out of space errors, monitoring partition thresholds is critical. Additionally, the 6.0 version wizard could set thresholds for system monitors easily. How can I set a threshold for ALL of my servers without visitng each of them? Finally, I wanted to fall back to an earlier version, but you
SSL for OpManager 6 Web Interface
How do we enable the OpManager web interface to use SSL? Thanks, Colin
Performance Monitor and Business view creator
Hello, i'm using OP manager v6 and i'm trying to have the same result with OP manager 7 ... I meet 2 problems : - no possibility to greate and assign performance counter (with thresholds) on a large number of nodes - Business view creator doesn't allow me to create a blank view (with only my .jpg background) which i will use to put my shortcuts. thanks for your help, C�dric
Report Parameters
Is it possible to add a "Time Window" parameter for 6am to 6pm in server availability reports? Or, if there was a way to conveniently change the 8am - 8pm option to another range that would work too.
Import list into Config File Manager
Is it possible to import a list of Cisco devices into Config File Manager like you can with Switch port mapper? If not, could you add it in a subsequent release?
Cisco ports not showing up
I am using 7.0 GA version and on one of my cisco 6509's, a group of ports on a couple different modules are not showing up when I view the interfaces. I can rediscover and they will show up, but if I try to add them, it won't. On another 6509 and 4948, ports didn't show up when I added the device, but I was able to rediscover and add the ports afterwards just fine. I have deleted the device then readded it, tried adding one port at a time, stopped the service and restarted, but nothing has worked.
The schedules about Opmanager MSP 7 ?
Hi all, Do you have any schedules about the Opmanager MSP 7 ? because my company have some security and performance consider, so we like to use the msp version... hope you can provide the schedules about Opmanager MSP 7 to me. by the way OP7 it's a great work, more function more stable and easy to use. thx for your works. Best Regards Rino Yeh from Taiwan.
Upgrading 6.0 to 7.0
I installed OpManager 7 and it appears there is no upgrade path for our version 6 configuration information. Did I miss something? If not, why would you release a product that isolates previous users and their investments in configuration? Is there a copy of version 6 that I can download to roll back using? Thanks, Colin
SSH CPU Utilization Monitor
Hello, I've configured a CPU Utilization to ssh and I'm seeing a SSH connection being made to my Linux servers as the the tcpdump: tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 22:02:59.297202 IP opmanger-server.32828 > linux-server.ssh: S 232470528:232470528(0) win 5840 <mss 1460,sackOK,timestamp 1315932578 0,nop,wscale 2> 22:02:59.297305 IP linux-server.ssh > opmanger-server.32828: S 5263190:5263190(0)
Service won't start
The OpManager service won't start on our server. The service begins to start, but it hangs (see screen shot). Thanks, Carolyn
Vendor support (Vmware/Bluecoat)
I was wondering if support for the following solutions is on the roadmap: - Bluecoat SG appliance series - VMWare ESX 2.5/3.0 Both have a large install base, and would be a great addition to Opmanager. A nice to have would be Cisco Blade center module (CIGESM) support. Regards, Leon
Opmanager 7 discovers only the first device in range
Hello, I'm currently evaluation Opmanager 7. When I do a discovery over a class C subnet, it only correctly discovers the first device it finds. The rest is classified as "desktop". When I take a look at the "desktop" group, all devices have a blue star (snmp enabled) and are configured with the correct community. I've tried auto discovering the following devices: Cisco 3560 Cisco 2950 Cisco 3750 When I take a look at a switch which is classified as desktop, at the Sys Desc. I see the correct value's
names of siwtch interfaces on network views
Hi, I have OM 7.0 running on a trial, and the network dashboard tells me that FastEthernet 0/1 is currently down. super. what it doesn't tell me is which of the many switches this is on, and doesn't give me any option to go click on the name to go to it. in a similar vein, i have other's with descriptions shown as "*** link to comm..." and other names all nicely cut off just before they become useful. my gut reaction is to really really dislike this crude abbreviation of a port, whay isn't it all
monitoring and graphics additional SNMP tables
Hi, i'm looking at a 7.0 implementation starting with a trial, and i need the ability to track arbitrary snmp tables. the first example a load balancer we have at the heart of our network. it provides SNMP data about each VIP that the machine holds, largely similar to the standard enterprise interface tables, but there doesn't appear to be any real way to effectively track these values. ideally i'd like to be able to have a graph of throughputs for each vip on a stacked area graph, so i can break
Storing information from monitors in external file
Hi, I want to get results from some monitors, e.g. Disk Utilization, CPU Utilization and Memory Utilization, collected on particular machine, and store in external file, like .log or .csv. How can I do that? Used is OpManager 6.0 on Windows. Thanks in advance, Grzegorz
MSDE
Does OpManager 7 work with MSDE? I have installed MSDE with the default instance on my PC but the OpManager 7 installation says "Host name or port number is incorrect" when trying to configure the SQL server details. thanks Richard
How to Backup WinProbe?
HI, We're looking to find out what your recommended solution for backing up an op-manager probe is. Does it make the most sense for us to just back up the Database & ship out a new server in the event of a failure? Are there any other important files that we should be retaining to deal with device failure? Please let us know. -ANI
Wake On Lan Broadcast
Hi, Does the Wake On Lan utility in OpUtils do broadcast or unicast? I want to be able to go across subnets, but at the same time I don't want to open my network up all the way by allowing UDP port 7. Thank you for your help in advance. Thanks, Ashley
PASSWORD RESET
Hi. A client has deleted the admin account and added a new administrative user into a probe of our MSP system and has forgotten it. How can we reset/recover the password?
Different Mail Server for Specific Alerts
Hello! I am running OpManager 6 Build 6016. I need to be able to setup specific Alert Profiles to use a different Mail server than the rest of them. The reason for this is that I need to be able to setup alerts on my Mail server separately, since if the Mail server goes offline I won't get the message that way! I know there is a secondary mail server option, but this won't work as our mail server can go offline but still receive the message (it just won't get processed into a mailbox), so I'm guessing
OpManager 6 - Windows service down email alert.
Can anyone please help me with setting up an email alert when the Print Spooler on one of our Win 2003 servers terminates? 1) I can send a test email from OpManager. 2) I have setup a Notification Profile (email) "when any [selected...] Windows Service is down" and selected "Print Spooler". I manually stopped the Print Spooler service on my server and did not get a email notification. Is there more to it than this?
MapMaker Tips/Tricks
Does anyone know any ways in which the device-text for devices in the mapmaker tool can be customized? i.e. adjust position (left, right, top, bottom), change the color, or even supress the text all together. Any other mapmaker tips/tricks appreciated. TIA
Network Application Monitoring
Hi, I am currently looking at the beta product running under Debian 4.0(side note, I had a problem getting it up and running - support was brilliant). I have a requirement for some monitoring to be able to do more than just do TCP port polling. Included are: SMTP polling IMAP polling DNS (udp) Our current solution allows me to configure not only TCP port polling, but, TCP conversation polling (while in most case tcp port tests are sufficient there are scenarios when more detailed tests are required).
Feature Request!
In the performance monitor, I would like to choose an interface based on the port Alias or the port name, instead of the port index. Ex. select the name: Gi5/1 It would also be nice to constantly monitor a device, even after logging out, similar to the way the network monitor works. This way I can go back and see if there have been any errors/discards over the last week or month. Thanks!
Treshold colors in Opmanager availibility reports
Hi, Is it possible to change the color tresholds in the availibility reports? We would like to see availability below 99.6 in yellow, and below 98 in red. Thanks in advance. Laurence.
MSP Quick Communications question ....
Hey guys, Im evaluating the MSP product for our company ..... Quick question, If i have a primary console in my office and a remote console at a client site, who initiates the connection ? I'm thinking of security issues for our clients, and having a 24x7 connection between the sites, or just leaving a port open sounds a little spooky to the clients .... Basically, does the client end initate the connection or the primary console ? Cheers all J
Issue with Cisco switch reportin ports
According to the "Port Availability Report", I have a 48 port Cisco 3548XL switch that has 82 transient ports and 18 used ports. This would result in a 100 port switch. This switch is only 48 ports. This report also states I have a Cisco 296048T switch with 40 avail ports, 48 used ports, and 12 transient. This would also be a 100 port switch, which is actually 48 ports. Your Port Availability Report is entirely too inaccurate to be useful. Chris Schear
new install discovery
I recently downloaded the trial version of OpManager to test out on our network. I have it installed on one of our servers, and started a discovery. I let it sit over night, and it stayed at 0%. I have checked the credentials, and they are the correct user name/password that we use. Any ideas on what could possibly be wrong?
FeaturReq: Frequency & Period thresholds for trap proces
Two things that would add huge value for me in Opmanager are: 1.) Text based; string matching for SNMP trap processors. i.e. Some products issue traps for various conditions using only the EOID, without varbinds, making it impossible to distinguish between different events. i.e. Checkpoint. 2.) Also, a frequency and period capability to SNMP trap processors would be invaluable. i.e. - Threshold creation: Create the alarm if (x) occurences of the trap occur within the specified age timeout period
email notification not working
Hi, I think i have correctly mail server settings and notification profiles. Couse when i try to send test mail, that is work fine. But notification email cannot send. And i see this message in notificationLogs.txt: Pls help me. 16:35:29:517 Notifications: alarmCode in checkAndNotify URL-DOWN_Deneme_URL properties: {MSSQLSERVICE=no, MSSQLMONITOR=no, CLEAR=yes, EXCHANGEMONITOR=no, SERVICE=no, ADMONITOR=no, WINSERVICE=no, EVENTLOG=no, INTF=no, URL=all, THRESHOLD=all, STATUSPOLL=no, TRAP=no, CRITERIANAME=GLOBAL,
pop3 smtp testing services
I know in the past network monitoring tools watch ports and send data and get a response. But i've had times where opmanager says SMTP or POP is up? but it isn't really working right. I'm wondering what opmanager can do in this department? I need a tool that will actually test a pop3 user/mailbox, test and send a smtp message. I know what's up gold does it but I hate their front end. We currently use opmanager 6 and we are looking for a solution that has these features. Anyone out there using opmanager
PROBLEM USING BANDWIDHT MONITOR
Hi, Iam usingbandwidth monitor under the head of network monitoring tools. earlier i was facing the error 2001 bt any how i had resolved that error bti amfacingthe error number 2005 and noti[s are given to resolve this error. I will be seeking your help in resolving this issue. Thank You Navneet Singh navneet
Opmanager 7 - Various Problems
hi, Downloaded OM7 , which is very good but have a few frustrating problems. When reporting alarms from ports on our Catalyst 6500's it doesnt give a meaningful name or even the ifindex. So all ports are identfied as cat3/5 this is not all very useful. Trouble Jun 26,2007 07:16:47 AM Traffic Utilization for Port 10/100 utp ethernet (cat 3/5) is 77.83%, threshold value for this monitor is 30% Clear Jun 24,2007 06:07:53 AM Traffic Utilization for Port 10/100 utp ethernet (cat 3/5) is now back to normal,
Configure Interfaces - Manage vs Status Poll - OpManager 7
Hello, Can I please get a detailed description on the new item in OpManager 7 "Status Poll". My assumption was that I could manage an interface, but not have it alarm me with the status poll option. For example, I could collect traffic stats, but not get an alarm if it went down unless the "status poll" is checked. Thanks, Mike
Cant monitoring Cisco interfaces
Hello World ! I have some problems when monitoring Cisco interfaces. I can't have interfaces values from 3 of my 8 cisco's devices. 3 of them don't spool the interfaces. I tried to spool them manually but with no result. I tried to rediscover them and to redefine the community but those values still don't spool. The traffic Monitors are all the same in the 8 devices... I attached 2 screenshots to see in detail my problem. Can you help me? Thanks for answering
OpManager slow
Hi there, I am more often experiencing OpManager running very slowly at random intervals, as an example I could click on a link and it may take several minutes for that link to come up. The server that runs OpManager is as follows Dell Poweredge 750 Pentium D 3.2Ghz 2GB RAM Fujitsu SCSI 80GB hard drive partitioned into three The processor is dual-core and I notice that when OpManager is running slowly, mysqld-nt is 100% utilising one of the processors so it's obviously busy doing something. Is there
Next Page