Error adding performance monitior - manual or templates
Manually added monitor to domain controller, monitor was for used space and free space. Have 29 Domain controllers but only 7 out of the 29 have the correct monitors. op manager version 9.2 This error is from a manual performance monitor add. These are Virtual machine running off VMware These are a mix of Windows 2008 Standard and R2 domain controllers. Any help would be great.
OP Manager Exchange Monitoring
Hi, We are operating OP Manager 9.2 with exchange monitoring. OP Manager showing very high User count as compare with actual counts which we check through exchange console. Kindly find attached snaps for your reference and guide me about the same. BR, Arshad
Longstanding Biztalk performance Monitors Gone Bad
I'm on Opmanager Build 9200 I have used some Biztalk messagebox host counters for over a year. Suddenly when I go to edit them, opmanager only displays a screen which says "Error!". Despite the error page, the values for the thresholds are still working, however I'm not comfortable leaving this way, as I am unable to modify them, and it could be matter of time before they stop working. I've tested from the opmanager server, accessing the perfmon BiztalkMessageBox:host Counters | Suspended
Problem adding MIB to MibBrowser Free Tool
Hello, I'm not sure what the problem is, but it seems like it should be pretty straight forward. I am trying to load a MIB, but I'm getting an error. Here is a description of the problem: - I have downloaded the DOCSIS MIB definitions (DOCS-CABLE-DEVICE-MIB_RFC4639.mib) into ManageEngine/MibBrowser Free Tool/mibs - then I open my ManageEngine MibBrowser Free Tool and click on 'File', then on 'Load MIB' and then point to 'DOCS-CABLE-DEVICE-MIB_RFC4639.mib'. Once I click on 'Open', I receive the
Opmanager - Templates not appling
op manager version 9.2 Under the category Domain controllers I have 29 servers I am wanting to modify the template that is attached to them "AD domain controllers" to add in a performance monitior for used disc space and free disc space. I can make the change to the correct template and it say it applied successfully, but the new performance monitors are not applied, any ideas, let me know if further info, explanation is required.
Oputils and 64bit
Can I install Oputils on a Windows 2003 server 64bit and have it function properly? Thanks, Joe
OpManager - server temperature monitoring
Hi all. We are using OpManager in our company (licensed). I can not find Dell specific performance monitors. I am trying to fins Temperature monitoring - I can not find it.
Notification Profiles -> Run Program -> Problem with $displayName VAR
Hello there, i'm trying to send SNMP Trap from OpManager to a MOM Server with trap receiver capabilities; all work fine but when I try to put in the $displayName variable and I test the function the The "Please wait" dialog box run perpetual. For testing purpose I tried to change the script into a simple echo "$displayName" > <filename> and I got the same result. Following a Java Exception found into stderr5.txt log file: 17:15:16:486 PM java.lang.IllegalArgumentException: Illegal group reference
Issues with Symantec Endpoint Protection 12.1 services - false positive alerts?
We've noticed an influx of false positives for Symanetec Endpoint Protection (EPP) 12.1 on our servers recently. Basically, it just reads that EPP is down, along with a couple of EPP services. I log in to the server in question and EPP is in fact up, and the services are running. We recently upgraded EPP to 12.1 and did not have this issue with version 11. Has anyone else experienced this when trying to monitor Symantec EPP 12.1 services? Thanks
Can i uses openldap to instead of windows AD for the opman user auth?
Can i uses openldap to instead of windows AD for the opman user auth? Thank you
Exit Code 4: Solaris - custom script
Hello, I'm trying to get a Custom script monitor working on a Solaris box. Script Body: DBC="DB Connections" EVAL=`/home/apa/db_connect_test.sh` echo Data:'\n' echo instance'\t'value echo $DBC:'\t'$EVAL If I put this script on the Solaris box it runs with out error and outputs the following: Data: instance value DB Connections: 12 I'm running the script as the same user set in OpManager's stored credentials so, I know that the script *should* work. However, I get this error when testing the
RepairDB
I would like know if I can use the RepairDB.bat like maintenance routine? Example: clear table, inconsistent data, etc. Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
OpM firewall rules
hi, I need put the OpM on my windows firewall rule exceptions, As I do this? Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
Import "Device notes" by xls/csv file
I would like to update all my device notes information, but we do have over 500 devices that it is not effective to input them one by one. Is there any way to import those information to all devices in one shot, e.g. by a xls files? FYI, I am using OPM build 9410.
Set Default Dashboard
According to the User Guide (page 132) I am to: 1. Mouse-over Dashboards tab and select the Dashboard which you want to set as the default dashboard. 2. Click on Actions drop down menu and select Set as Default Set as Default is not an option for the dashboard I selected. OpManager version 9 build 9410
disk usage alert script
Hello, I want to make a script to alert if a specific directory space less than 50%. Does this seem to work? #!/bin/bash DLOC="/dev/sda1" DVAL=`/bin/df -kl | /bin/grep $DLOC | /bin/sed 's/^.* \([0-9]*\)%.*$/\1/'` if [ $DVAL -gt 50 ]; then echo "Data:" echo -e "diskusage($DLOC):\t$DVAL" fi
Couldn't get memory utilization for AIX Server.
Dear All, I have installed recent OPM version in Linux device. AIX Server version: 5300-10-01-0921 I have manage the performance of AIX server using SNMP protocol. I can't use the CLI because of security problem. Using mib browser tool, I have tested the CPU/MEM/Disk Utilization. CPU Utilization: hrProcessorLoad.1:-->0 hrProcessorLoad.2:-->0 hrProcessorLoad.3:-->1 hrProcessorLoad.4:-->0 Memory Utilization: Request failed or timed out. No error Disk Utilization: hrStorageUsed.1:-->199207 hrStorageUsed.2:-->632246
Switch Port Manager -> IF Speed and Vlan ID WRONG VALUES.
I use OpUtils v.6.0. I am testing this tool, but i have a problem with switch port manager. When i go to a switch the column Vlan ID and IF Speed have wrong values for many interfaces. My switches are Huawei and snmp is configured for all versions. OpUtils is installed on CentOS 6.3 and have the last built no. 60048 for OpUtils please let me know anything, Regards, Miguel Esnard
Backplane Utilization cannot be monitored on Cisco 2950
Back plane utilization on Cisco 2950 and 2960 switches need to be monitored and initially Backplane utilization of both models cannot be monitored. After upload CISCO-STACK-MIB, only Cisco 2960 can be monitored the Backplane utilization and still Cisco 2950 cannot be monitored. Please help.
Feature - Improvement Request, Notification "clear" change
Currently If a notification profile includes the "clear" notification, that profile subscribes to "all clear" notifications. I would like, this to be changed, to only subscribe to clear notifications, for conditions the profile is subscribed to in the first place. For instance for our SQL DBA's I do not notify them for problems with any interface, but they receive the clear notifcations for interfaces, which just results in us getting questions for issues which really they don't want to be bothered
Hyper V automatic guest detection disable
Hi, At the moment when I add a VMware host I have the ability to turn off autodiscover for the guest machines on it. I would like to do the same with Hyper V servers but I don't have the option. This means although I only want to manage the HOST it picks up guest servers hosted on it and fills up my licenses. Can this be done? Kind regards Eugene
WMI Polling - Authentication Question
We are currently in the beginning stages of configuring OpManager, and have hit a bit of a snag. Per the KB on the issue, for WMI to correctly work, -administrative- access is required to the domain controller. My employer does not allow administrative access to the domain controller, so that puts us in a bind. Does anyone have a work around for this?
At a glance reports not showing WMI stats
Hello All, Hope this is not a question that's been asked over and over... but here goes: If I set up a new server to be monitored and add a load of WMI monitors this all works and the status screen looks good and shows data. When I run the At a glance reports, no data shows??? Does the data have to come from SNMP monitoring or is there a way to get it to show data from WMI instead? Thanks in advance..
Netflow add-on into OPM
I am using the following version of OPM and NFA: OPM Essential 9410 NFA 9 Professional 9700 I try to integrate NFA into OPM so that I can check the traffic in one screen. I have successfully config the Add-on as attachment 1 But when I try to check the ports traffic on OPM, it ask me to login again in NFA as attachment 2 I try to login but fail, it just keep on ask me to login again. Can anyone help me on this case? FYI, the credentials sure can login to NFA.
OID WatchGuard
I added my WatchGuard firewall 750e. I uploaded the MIB that the manufacturer, but can not find the OID for CPU, Disk, Active Connections, link up or down. Anyone know how do I find these OIDs and add in OpManager? Follow MIB attached. Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
Opmanager and scheduled discovery
Do you plan to develop a scheduled auto-discovery on opmanager?
Postgre monitoring
Hi, I need to monitor a database of OpManager, but what credentials? Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
Report Schedule Mail Format
Dear Support, I want to schedule monthly reports for availability and modify the mail layout of this scheduled mail. Is this possible in OpManager thanks and regards Baran
SNMP Walk logging
Hello, I need to constantly gather informations from Oid: 1.3.6.1.4.1.2356.11.1.63 - gps position data per time interval that I've set. The best solution would be logging it to a file. The goal is to track selected device using SNMP Walk. I can read current position, but how can I log entire history of oid's data? Thanks i.a. Paweł Szczepanik
Resize column width in IPAM
Hi please tell me how to resize the default column widths in the IPAM plugin for OpManager. Specifically I am looking to resize the "IP -> DNS" column to 50 characters. Thanks, Matt
Summer Time
Hi, here in Brazil the summer time already finished and the Server where OpManager is installed update de time, but the OpManager application still remains in the summer time (one hour in advance the regular time). How can I solve this problem? Tks in advance Regards, rqpaiva
How to can hide the default infrastruture view in infrastruture snapshot
How to can hide the default infrastructure view in infrastructure snapshot. Because We use other infrastructure view to place server and other devices. default infrastructure view such as Servers, Routers,Switches and Desktops no contain any device. But them can't be deleted. We really didn't want to see them in infrastructure snapshot. Any guys know how to hide them?
How to move opmanager from one server to another?
Hy, I would like to move my OpManager version 9410 to new server. When I download new installation from manageengine site I have version 9450. When I try to restore database I get an error saying that I have wrong version. Where can I get new installation file version 9410? Thank you for your respond. Robert
VM not being discover auto when adding host
after adding the host servers into op manager none of the vms in the host comes across with it. any help will be appreciated :)
How to fetch reports for the servers
Hi Team, I have come across with your tool: Windows healty monitor, happy to see the basic monitoring it does. Was wondering, if there is any option for fetching the report for CPU/RAM utilization in XML or PDF format.. :)
REST API to get information about particular servers?
I was looking through the documentation and couldn't see an obvious means to get CPU/RAM/HDD usage about a particular server through the REST API. Are there any examples/samples of this?
Hyperlink in custom Gauges
I modify the "/conf/opmamanger_snapshot_dial.xml" file and add support for a Custom Category of Equipment...i add this snippet: <CATEGORY name="Custom"> <DIAL dialType="number" displayName="Some Description" name="Name1" shortKey="Some" unit="MyUnits"> <PARAM pollKey="CUSTOM1" type="Custom Type"/> </DIAL> </CATEGORY> How can do the following: When i click over the gauge a popup appears with the "Script Monitor" info, like when i click over the script monitor Thanks
SMS Test Message Looping
Hi. I'm trying to use the latest trial version of OpManager 9450 on Windows XP SP3. And when I configure sms server settings and press 'test' button, test message is sending and comes to my phone again and again (looping). I use Nokia 6110 Navigator as sms modem. This problem like a problem, which was described in https://forums.manageengine.com/topic/sms-messages-looping. Please help me to resolve this problem.
Customizing email body for schedule reports
Dears, I've setup a scheduled report in OpManager, and i will send the report to some receipents through their email ID. This is working fine, however the email format (text, text style , ..) is not satisfying. I would like to know if there is anyway to customize the email body so i could send the report email with more reach format. (ex: lets say HTML format) Regards,
Virtual Device - "Interface Teredo Tunneling Pseudo-Interface-Tunnel" where can I modify threshold?
the virtual device template seems to have included some pre-configured thresholds. We keep getting threshold alarms for the "Interface Teredo Tunneling Pseudo-Interface-Tunnel". I just want to shut off any threshold monitors for this interface whatsoever. However I can't see where this is configured, or where I can modify the alerts for it. I don't want to disable all network monitoring I just want to drop this interface out of the watch list.
Next Page