Opmanager 10 w patch "buy Now" link showing up on registered version
Our product is licensed, and I don't want users to think otherwise. The "buy Now" link is unwanted on registered version. AMS Expires on : 10 Jan 2014 12:00:00 AM PST
Menus Removed after Opmanager Upgrade
Hi, We're applied a service pack to upgrade Opmanger 8 to version 8810, (as we plan to upgrade to version 10) and I notice since applying the Service pack for Version 8 It has removed the menu, What happended? It was there before we applied the service Pack now we can't add new devices Screenshot below
need Device Profile for F5 6900
We wish OpManager can have device profile for 6900. But it couldn't. There is a device profile for F5 6800. But the CPU utilization, memory utilization are incorrect. We are using OpManager version 9200. Regards, Toai
Bandwidth monitor per minute
Hi, Is there a way to configure BW monitor on OpsUtils 5 to poll and display per minute data instead of the default 5 minutes? Regards, Mark
track file size with opmanager
I'm wondering if anyone has an idea on how to use SNMP to work with OPManager to alert me when a particular log stops growing in size. Is this possible?
unsolicited traps
How can I make opmanager to simply ignore and drop the unsolicited traps, or maybe delete them after a while, instead of keeping them into the db? In about 3 weeks of usage I have about 2 million rows of completely useless unsolicited traps. Thanks
Custom monitor not capturing data or graphing
I have created a custom monitor i can poll it but the data is not being graphed or altering can anyone help. Thanks, Stephen
Add disk utilization on virtual server
Hello, I'm trying to monitor disk usage on my virutal servers. Few days ago one of the disks only had 2 MB room left. And I didnt have any monitor on the specific server. I'm now trying to add the servers for monitoring but cant find the option where this is done. On my physical servers its very simple. How do I do it on the virutal? Regards Haariis
DomainController Category Bulk Change
Is there a way to change the DomainController Monitors in Bulk? I'm not seeing a way to do this. I am running v9
how to monitor Internet Traffic of those IPs outside of the LAN
Hi, There is an ADSL which goes to router. those IPs which are in our LAN can be monitor. but those IPs which are directly connected to the internet cannot be monitor. How can I monitor the Internet Traffic of these IPs. Note: Our LAN is 10.0.0.0 . and we want to monitor anything except 10.0.0.0. In addition there is no Proxy or ISA server to do it with them. Could please tell me how can I do this way of monitoring? Best Regards
FIX: Memory Leak on Windows 2008 (non-R2) in LSASS.EXE
I wanted to share this on the forums here in case someone looks for it. If you use a lot of WMI scripting/monitoring and are using NTLM for authentication Win2k8 through service pack 2 has a memory leak in lsass.exe and will consume the server memory after a while. This MS hotfix fixed it for us and lsass' memory usage is no longer constantly growing. (It looks like this hotfix will also be a part of SP3 whenever it is released.) http://support.microsoft.com/kb/971265 If you're finding java.exe is
Active Directory or LDAP authentication
Can you use Active Directory or LDAP to authenticate users in OpManager
Add Category and Inherited Monitor Properties
Hi, When I go to add a Category from the Infrastructure Views menu, I am prompted to select 'Inherit monitoring properties from:' and am them given the list of default Categories e.g. server, desktop etc. Can you please tell me where I can find details of these default monitoring properties? Thanks
need support
why there is no integration between opmanager and desktop central ?
Interactive Service Detection
Hi I have noticed that OpManager is not fully supported in Windows 2008. When the service starts it try to start Internet Explorer, resulting in this dialog. (see dialog.jpg) If I click View the message, a Opmanager login screen is shown. See Result.jpg Why does the service display the login screen? I have seen this error in ADManager too. About the problem: http://blogs.microsoft.co.il/blogs/yanivf/archive/2007/08/10/Services-and-Session-Zero-in-Vista-and-Windows-Server-2008.aspx OPManager: build 8811
Assign performance monitors?
I would like to be able to monitor CPU, Memory, Hard Disk IO and Space, and Bandwidth for all servers, and the CPU/Memory/Bandwidth for Network devices... Is there an easier way than going one by one each monitor and setting thresholds for every monitor, then setting alerts for going over the thresholds? 5 monitors X 157 servers = 785 Monitors X say.... 30 seconds each monitor, thats a full 6 hours to set up monitoring... and thats just the servers/virtual servers...
message length
I amb not getting all of my message detail in my alerts. i was given an answer on how to do this but it didn't work. here is what i was given Hi, Please follow the steps to increase the length of the alarm. 1)Enter into opmanager database :\>mysql.exe -u root -P 13306 opmanagerDB; (You can find mysql.exe under /opmanager/mysql/bin) 2)change the type to text from varchar(200) so that you can store the entire message. mysql>alter table event change TEXT TEXT text; mysql>alter table alert change MMESSAGE
Opmanager 10, IBM BladeCenter Cisco Hardware Sensors
Upgraded to Omanager 10 yesterday. Appreciate the fixes. However posting regarding every bladecenter we have (5) alerting for Cisco BladeCenter Switch Hardware Sensor Alerts. "Hardware Sensor Name : chassis. Category : fan. Current State : warning(2) - The sensor is operating outside the normal operating range" Its unlikely that we truly have a problem with every blade switch, honestly I would not be surprised if these switches are fan-less, because of the monstrous fans which exist in the IBM
App to OpManager
Hi, Any applications that you can monitor from my phone (OpManager)? Thanks
Upgrade Opmanager
We would like to upgrade the Opmanager to latest version from existing version “Opmanager 8”, kindly let us know the detail steps to upgrade and the necessary precautions and recommended version.
Opmanager and Chrome V26
Support, Chrome v26 breaks the opman interface. See attached. All common sense says this is Google's fault, but you can be pretty sure they aren't going to fix it, so we need you to fix it please? Same issue on Versions 9.4 and 10. Tried IE10 but the IEPulse tab doesn't work. Won't use Firefox - the bloated crashing pile that it is.... Thanks, Dean
SQL Logfile Used % showing very large number
We are using OpManager to monitor our SQL servers. We have a database that is being mirrored that we are trying to monitor but it is not working properly. When we look at "Logfile Used %" it is showing "9223372036854776000 %" used, on the primary server of the mirror it shows as "4 %." I tried removing the mirrored copy from OpManager and added it back, however it still shows this large number. The log file size is only 150 MB. Any ideas on how to correct this?
Polling interval issue with Opmanager build 10
Ever since I installed the new Opmanager build 10 , my interface polling has been set at every two hours. I had all my interfaces polling at five minutes before the upgrade and I cant seem to bring the polling time back down. Is anyone else experiencing this issue?
IPAM and SPM Add-In Stop Auto Discover
Hi guys I am looking into the IPAM and SPM plug-in for Op Manager but as soon as I install the plugin and seems to start auto-discovering all of the devices. How do I stop this from happening because I have 600+ devices and I only want to trial on a single site in the short term?
IPAM and SPM Add-In Stop Auto Discover
Hi guys I am looking into the IPAM and SPM plug-in for Op Manager but as soon as I install the plugin and seems to start auto-discovering all of the devices. How do I stop this from happening because I have 600+ devices and I only want to trial on a single site in the short term?
Add ability to disable tabs in OpUtils
We have engineers that use the product to find an available switch port in the VLAN they require but we don't want them to access the other tabs...especially all the Tools.
Problem with BackypDB_Postgre.sh
Hi, when execute the script (as root user) ./BackupDB_Postgre.sh -mode all -destination /usr/tmp i obtain the following message: Please wait ! Backup DB started ..... - 0 out of 909 tables completed. jdbc.BackupException: Error writing data to file. Thank in advance
Workflow URL check not working
Hi, URL monitor in workflow doesn't work correctly: if you try to check public URL like google.com or cisco.com, either with Get or Post method, the site doesn't respond (Host Unavailable error) However, the same function in URL "dashboard" monitor works out.
OpManager Customer Monitors
I am trying to use this guide: http://www.wmaus.net/wordpress/?p=960 to make custom SNMP traps. I have everything working on the Linux side. but the way the OID is generated is random, so the OID isn't in the MIB. I can't see how to monitor the OID because its not listed. Any advise?
Expand hostname in Layer 2 Topology Map
Hi is it possible the expand the host name view within layer 2 topology maps so that I can view the whole host name? Currently some of my host names are 25+ characters
Monitoring Ethernet hand off links
Hi, We have few ethernet hand off links (WAN circuits terminated on FE & GE ports) on cisco routers. Though the link is down, the status of the interface will be still up. How to monitor such links using opmanager? Thanks, Sridhar
Question
Hello, in the device details, I've created a custom filed called Location and would like to know if there is a way to populate this field automatically using snmp: 1.3.6.1.2.1.1.6 - sysLocation? I would hate to have to maintain the information in the devices and in OpManager and I would like to avoid those csv imports. Thx! JEC
Is it possible to show the site name beside the servername?
I would like to see the site name on the central server beside the servername on the alerts list. Is there an option to show this? With 500 devices an 10 sites, it is not easy to see directly on which site the server is. Thanks Jo
Visio 2010 Add-in
Can anybody advise if the Layer-2 Map Visio plug-in is available for Visio 2010?
Agent monitoring
Whe use opman 10.0, when we install e agent on a systeem in will come online for 1 minute afther then is goes offline en never come back online. Saying can connect to the server.
opmanager 10 slow, not usable
Hi all, we've just installed OpManager 10, last release. Now we're monitoring about 180 devices. All of the sudden, the web interface has become very slow: about 10 minutes after service start, it becomes simply unusable (it takes about 20 minutes to login). We've tried several things, we've disabled interactive service detection (both disabling win service and editing the opmanager xml file), we've tried to tune the postgres db (increasing the memory buffer and so on), but the issue still persists.
Blank VM Guest OS
Hi All, I have a situation where some of the hyper-v VMs do not show the Guest OS on the VM Info tab of the snapshot page. Everything else works great. Any idea what may cause this peculiar problem? IT Systems Manager Sandy Lane Hotel
cannot connect in credential using telnet
Hi, I have a problem on using a credential telnet when im using my modem(Zyxel P-2612HWU-F1) also known as wifi modem the connection cannot be succeeded even you input the correct password. but if im using a putty it can be connected. I think the difference is when im using the putty it is not asking for username, only password but in the credential it requires username.
SMS Notification (on-call scheme)
We use an on-call rotation scheme. Where each week another engineers mobile phone will receive the notifications. Since this is not a feature in the current version of OpManager, we hacked ourselveves a solution by altering the the contents of the database. This seems to work for escalations but not for notifications. If I go to notifications and save it, it'll work. Could you either tell us, how to solve this and/or implement an on-call scheme in the notifiation and escalation function. This is
No Hardware Health Monitor
dear sir i download the new version of opmanager 10 but there is no Hardware Health tap in the version can you please guide me how to show this features? thanks
Next Page