OpManager MIBS for NetApp FAS 3220
Hi, I'm having problems importing the MIBs for our new SAN (NetApp FAS3220) has anyone beeen successful in importing the the NetApp supplied MIBs into OpManager? MIBs attached.
new hardware health features and dial graphs
Hello, I've few questions about new hardware health features (Opmanager v10) and dial graphs : Hardware health tab We've got an HP Lefthand Storage array. This hardware is discovered as a Linux server and some hardware counters are not properly configured (see screenshot below : fan speed empty, power 0 watts,...) - how to modify these SNMP OID hardware sensors for this category ? - how to modify thresholds to create alarms on hardware sensors ? An hardware monitors sub-menu like in screenshot below
AIX disk problem
Hi, we have 4 Aix machines there. one of the AIX macheines' disk show all the disk partions and utilizations,but rest of the servers not. I checked Performance polling is enable for AIX. kindly give me suggestions for this... Thanks, Tulsi
Server health monitoring not working opmanager
Hi, I'm new user op manager.I installed op manager centos 6.4 64 bit.I want to monitor all of my server,such as vm ware esxi,centos and windows server.At first i discovered all linux server.I see service monitor working but performance monitor not working.I see my all linux server snmp running and i add Credential Details, but when i want to test Credential than it show SNMP Passed CLI Failed Failure Reasons CLI Incorrect Login Parameters I cant understand how to resolve this issue or i think missing
Recent Alarms Device not responding: probably down or busy
Our Recent alarms are not clearning. The alarm message is "Device not responding: Probably down or busy" Date / Time 1/6/14 1:13pm However when you click on the device is responding, but the error does not clear.
Error URL
Good morning. We had a fall event in a URL that was in down state and after sometime the same returned to the UP state but the graphics appear with a status of down. What is the solution to this problem?
Editing Device Templates
Hi All, i would like to be able to edit the Windows Server 2008 device template. this template has auto assigned itself to our servers when they were discovered by Opmanager. i just need to enable the monitors which are default on this template - however i need to assign the template an OID? is there a simple way of editing the template without this as these servers are using WMI and not SNMP. im sure there is a simple way of editing the monitoring values. im new to this so any help would
Certificate Expiry Field and Custom Report, by Certificate Expiry Dates
Here is an easy to implement suggestion. I would like the option to add Certificate Expiries, to Server and Network devices, and be able to put thresholds based by their expiries, so that I could be notified in advance of that date, to obtain my renewal. I've created a custom field for Certs, with a date field, but that doesn't help me with monitoring it :-) which I would like to at 1 per day, and a threshold of 1 month or 2 weeks etc. Would be very useful with the number of certs which we manage.
OPM device needs manually set "Manage" after connectivity loss
Every time remote devices lose connectivity, we have to manually go to device page > Actions > Manage again. How can this setting be changed where we no longer need manual intervention?
please help , how can i monitor HP blade 460c mirror disk ??????
Hi everybody , how can i monitor HP blade 460c mirror disk ? our company has opmanager and opstor , but none of them can't detect the mirror disk !! just detect first H.D.D , i wanna monitor the mirror ( another one ) , i don't wanna lose my job please help me , your kindly help is really appreciated .
10200 Removes Custom Toolbar
I had created a custom toolbar within the navigation menu of our 10100 build. It included links to all other web-based management tools available in our organization...made it easier for technicians to browse to the device management. After 10200 that's gone. Not a HUGE problem, but just FYI...not great.
Server List
Is there a way to get server list for a particular domain via IP range? I know I can do all computers then do a search for server but need to know if I can by IP range.
Opmanager Iphone App AD Auth
Hi, Can you advise when and if you are planning to implement AD auth via the iphone app Thanks
All Alarms: Not showing correct results
When I select a different page size in the Alarms -> All Alarms screen, leave that screen, then come back, it will always show 25 results, while the page size shows the option that I selected before. When I initially select the page size, it shows the correct amount of results. This also occurs when looking at specific device results if there are enough results to view. System details: OpManager 10 on Windows 08 R2. Viewing on Max OS X 10.8.5 using Chrome 30.0.1599.69.
Discover from a CSV file
Good evening, I have OPManger 10 installed on a test environment. I'm trying to discover a list of server from a CSV file but I get the following error: "Devices in the specified range are not active". All the server are in a WORKGROUP. Can i resolve this problem? Thanks.
Hyper-V Systems not showing in Top N Min/Max/Average CPU/Memory usage widgets
I created a new business view, added 4 physical SQL servers, and 4 Hyper-V Host machines. Then I created a new dashboard, and added two widgets, the Top N Min/Max/Average CPU and Memory widgets. I then filtered the widgets by All Categories, but only for this business view with 8 devices. The problem is that the Hyper-V hosts do not show up in the widgets at all.
Workstation Monitoring stops after a client reboot
Morning, I am trying out the OpManager software and have tried to monitor a workstation to see what its like, I have setup the performance counters CPU and Memory, connected via wmi (winxp) using my admin credentials, it works all day then when the machine is powered down and back up again the performance monitors stop working. I have tried the Test Credentials which passes, and the Test Performance Monitors which Fail, i can remove the monitors and add them again and it starts working. I'm assuming
Maintenanc Calendar Items - Per Server - Per Virtual Device
I would like a Date & Time Field added for some routine maintenance that we perform on servers, and virtual devices, here is what that list would include: Backup Schedule: Defrag Schedule: (would be associated with physical servers, but not be associated with virtual devices): Scheduled Maintenance (with description): Patch Schedule: Custom Schedule: (which I could populate a text field with information about the upcoming event) Associated Reports: I'd like to run a report for all servers,
AppManager-Plugin in OPManager
Hi, is it possible, if we like to use AppManager and OPManager in our company, to install just the OPManager plus the APPManager-Plugin (ManageEngine_OpManager_APM_Plugin)? Or is it still needed to install also a separate full installation of the APPManager? If it’s possible just to use the OPManager plus the APPManager-Plugin, how about the licensing? Are the licenses we bought for the APPManager still valid? Kind regards Christian
I need to update the JUNOS mibs in opmanager
Hai, I need to updated update the below mentioned mibs in opmanager. Here's the full SysObjectID list for Juniper JUNOS devices Juniper JUNOS SRX650 Firewall 1.3.6.1.4.1.2636.1.1.1.2.38 Juniper JUNOS SRX650 Firewall 1.3.6.1.4.1.2636.1.1.1.2.40 Can you assist me for the same. Regards Murthy
CPU Utlization and Real time monitoring Not working.
HI Support Team, We are using OPManager Build 9200, and we are facing the CPU usage issue from one of the production server which has Intel(R) Xeon(R) CPU E7-4850 @2Ghz (4 Physical Processors) and totally 80 vCPUs. It results the CPU usage violation since the machine is under utilized. What could be the problem? And CPU Utilization graph shows blank.. -Elangovan B Global Computing Team,
Cpu of Checkpoint firewall
Hello, i have an issue with the cpu value of my Check point firewall, it's always 0%, or if i type "top" command, i can see that cpu load is between 10 and 15%. My checkpoint firewall is installed on Dell physical server. If i use CPU Utilization(UCD SNMP MIB) it gives me 0 : Monitor Name CPU Utilization(UCD SNMP MIB) Protocol SNMP OID .1.3.6.1.4.1.2021.11.9.0 Monitor value 0 Units Percentage If i use CPU Utilization (CLI) i have en error : 1. The device might be down. 2. The username and password
Data Loss after applying a device template
Hello, I was experimenting with applying two device templates to the same server to test how it handles the monitors added to the server. For example, I have a Linux server that has been collecting data for several weeks for just its typical monitors (disk space, cpu, memory, interface traffic, etc.). I recently created a new template containing a custom monitor for monitoring an apache webserver via SNMP (I have an agent that collects data and pushes it out to a unique SNMP OID). By taking this
Memory Utilization Dials on Virtual Machines "InCorrect"
I wanted to get some feedback from other users regarding the display of the Memory Utilization metrics for VMWare VM's. After moving to vmware host monitoring in opmanager we noticed that we were getting conflicting information, specifically relating to the Memory Utilization monitoring. (The same applies to CPU Utilization monitoring also, however the difference is not as pronounced). After much consternation, (and discussions with manageengine support) it turns out that the memory utilization details
Op manager problem adding ESX and their Virtual machines
Hi I have an issue with ESX server, I had working one ESX server in Op manager but I deleted it because it showed 3 virtual machines as orphaned.... so we decided to delete the server, but now I cant even add it, it sends me a message like " cant add the virtual machines"... weird fact because this was working yesterday. Could you help me with this? Im working with latest version of Opmanager. Thanks
Moving postgresql DB to Another Disk
Hi, When I initially installed OpManager I installed the database on the C: drive. I'm rapidly running out of room on this drive and I'm wondering if it's possible to move the database to a second drive on the same machine?
Add Listview Items on Snapshot View
Hi, i would like to add an ListView Item on Snapshot View (like Netapp Devices) to display monitored values. Or is there any other solution, to have an overview of the values from the performance monitors? cheers, Marcus
URL Content Match
I see that I can have OpManager alert me if a keyword I choose does not show up on a website. Is it possible do this in reverse ti have OpManager alert me if a keyword shows up. i.e. OpManager alerts me if www.blablabla.com has "Server Unavailable" or "Error". Thanks!
MAP: Unable to process Property Update notification for "server". No ManagedMapObject found.
Hi I get in the "nmserr.txt" file the following Error for some Servers I added to the Monitoring. MAP: Unable to process Property Update notification for "server". No ManagedMapObject found. How can I fix this? Best regards
Config Mgmt Plugin Error
Hi, I have installed the Device Expert plugin on the probe server and when I try to go into the plugin under the network tab I get pushed to the Opmanager login page and once logged in again I am back to the main op manager page and not the device expert. Any help would be much appreciated. Regards Henry
Custom Monitor overview
Hi It would be nice to have a possibility to see all the custom Monitors we made and to edit them if needed. Right now I have to knwo in which template I have added a custom monitor and if I would like to add one to an other Template, I have to create a new one. Thanks
Export of Configs per Device?
Hi all, I am currently auditing all servers we monitor in OpManager. Currently the only relevant report I seem to be able to run is "Notification Profiles Applied by Device" That's a good start, but what I would like to do is generate a report that tells me what each server has monitored, and what their individual settings are. For example: Server A CPU and thresholds Memory and its threshold Disk C and its threshold Disk D etc etc... Is this possible, or am I going to have to try a custom database
Opmanager - Service / Resource false alarms
Hi, Opmanager Version: 10200 Setup: Three VM's in a Esxi farm with multiple instances (40) of Tomcat on each server / vm Issue: Opmanager will report false status (down or unavailable) on Processes and / or Services being monitored. Removal of the monitor and recreating the monitor will usually clear the issue for a few hours, however the alarm will resurface, sometimes the alarm will move to a different service / process number (e.g. Tomcat01 alarms, delete monitor - recreate - alarm resurfaces
OpManager: strange process CPU usage (over 100%)
We have a strange issue. We get reports about CPU utilization, where a process utilize CPU more than 100%. Could you explain, how this could be? We are using Opmanger 9 Build number: 9450 Latest version: 10200 ---- Message: CPU Utilization is now back to normal, current value is 24%: Top 3 Processes:-sqlservr - 199.973%;sqlbrowser - 0%;MonitoringAgentService - 0% Device: ste-vmdb-003a.sterling.corp.voxiva.net Category: VirtualDevice Error Condition: Clear Generated at: 18 Oct 2013 01:58:42 AM GMT
Trying to create a template for ITWatchdogs Watchdog15 but getting a units error
I imported the MIB, found the OIDs that we need for monitoring and created a template. For some reason the temperatures come off missing a decimal point. For example, 75.5 F comes out as 755 F. I checked it again with the MIB browser and it shows: internalIndex.1:-->1 internalSerial.1:-->070004A3F58477C3 internalName.1:-->WatchDog 15 internalAvail.1:-->1 internalTemp.1:-->777 internalHumidity.1:-->31 internalDewPoint.1:-->447 Any thoughts?
OpManager 10200 and Hyper-V in Windows 20012 R2
Hi all! What about monitoring Hyper-V in Windows 20012 R2 by OpManager 10200b ???
Current connections iis
Hi, I have an IIS server, is possible view current connections to the server with Opmanager? Thanx Sal.
Custom Dashboard
I have 6 maps that I created. I would like to have a custom dashboard that only has links to the 6 maps. Is this possible?
Version 11 and API Client Interface
Hello, I just recently upgraded to the newest version of OpManager. Although we typically do not use the newer API-based UI that's available because it's in beta, one of my users really likes the graphs/reporting functionality it has compared to the regular UI. For some reason, however, when we access the apiclient on v11, some data does not seem to be pulled correctly. Two obvious examples are: Under the Inventory section, the categories listing shows that we have 106 servers - "Server (106)", but
Downtime scheduler
Hi, I am trying to schedule downtime on some devices. When I choose "Select devices" there are no devices under "All devices". Any idea why none of my devices are shown? Thanks and regards Kim
Next Page