How to generate disk free space report
How I can generate disk space report for any server?
NBAR and Serial interfaces
Good Morning, I have just enabled NBAR on all of my interfaces. The problem is that the NBAR report is only available on the Gigabit Ethernet interface. Netflow shows that NBAR is enabled on all of the interfaces on the router ( I have one Gigabit Ethernet interface, 1 Serial interface with 4 subinterfaces). The router shows that all of the interfaces have NBAR enabled. I have restarted the Netflow service with no change. Any ideas? Thanks.
Scheduled Report on NFA
Hi, I would like to know that, can i get a customised Top Application Report usage on the routers, i have 4 routers configured, i had configured the scheduled reports but the reports are showing only in numbers not in the graph, report is only for Traffic graph, can i get a Pie chart or Top Application report configured to send the scheduled mails. Kiran
unable to see new router on dashboard NFA 5.5
Hi, i had configured a router to farward the ip cache to NFA 5.5, but i am not able to see the router on the dashboard. i am able to ping the router the ports (9996) is opened on the firewall but still i am not able to see the router on NFA dashboard, on the router serial port i had configured the ip netflow is it fine ? or only on the fastethernet i hav to configure ?
Configuration Cisco router 1800 with MSP OpManager
Hello, I downloaded the trial version (MSP OpManager) and I installed it on my WindowsXP, and I have a cisco router running in my office (1841 series), and I need to install the "probe" on my server's clients, and according to the manual, I have to connect to my IP address (central server) but my laptop (with private IP) is behind my cisco router (with the public IP) , so my question is if I have to open a port on the cisco router ? and I need to forward the data from the router to the laptop? (all
associate requests to one another
Is there a way to associate requests to one another? For example, if you want three separate requests done during the same service visit. I thought of making custom text fields, but that seems like it would create difficulties when using these fields for reporting. Thanks!
Graphic on reports
How can I make my company logo appear on my reports? Thanks! Carolyn
PasswordManager Pro 4.5 Released !
Hi, We are immensely pleased to announce the release of PasswordManager Pro 4.5, erstwhile called PassTrix ! In the last 6 months, PassTrix has seen tremendous user interest and we are excited that this release was driven by user requirements. Apologies for the delay in the release, but am sure you all will find the product useful. I take this opportunity to appreciate and thank all of our customers and beta testers for their immense help. For product details : passwordmanagerpro.com Download product
Can we do custom scripts
Can a new user creation kick off a script to do a special routine? Jeremiah
Ordered Disk Scheduled Reporting.
I already submitted a support request for this issue, and received a reply, but figured it would be useful to the OpManager community to be aware of the issue and know that AdventNet has been informed of the issue and has assured me they are working on a fix for this problem. == When one generates a one-time all disks report in OpManager - it displays fine. However, if one schedules the report to occur regularly when it is sent to an email box it appears unordered. Thus, the drives are not ordered
Windows Server 2003 Service Pack 2
Hi there, Does anyone have experience in upgrading the opmanager host operating system to Service Pack 2? I've been searching the forum for some time now, and cannot find any information on the subject. I'm running Service Pack 1 now. Best Regards.
Site 24x7 Integration into OpManager 6.
Compared to Site 24x7's url monitoring, OpManager 6 is primitive. What's the chance that the Site24x7 code base could be integrated into OpManager? It would be great to have this sort of functionality - including the recorder built right into OpManager, especially since Site24x7 can become prohibitively expensive if you have a large number of pages you need to check. David.
MSSQL and SDP6 start up
My issue with MSSQL and SDP6 was down to the wrong port for SQL. I used netstat to see what port were in use and work it out from there. The port i found worked was TCP 1101. Now works like it should. :D
How to change language
I installed Netflow Analyzer with the english language but as soon as I open the website it show everything in dutch!! Is it possible to change it into English?!
Domain tracking???
Hi all In my network there are several domain , but only one of them use servicedesk, sometimes I found other domains in "Log on To" combo box that I should delete them. how can I stop domain tracking ??
Not able to see Logidal Disk Drive on Server
I can see the total disk utilization but however, not each individual drive. Is it something I need to set further? I tried the MIS Browser, it shows all the drives. Please help me. Thank you!
Checking of URL availability
Is there a document on how does OPManager check the availability of a URL? Cause in some cases, even if the URL is up... it still shows that the URL is down and when I try to test via "TEST URL" it times out; but if I manually inputted the url on the explorer it works fine. Also 1 more thing, is there a way to create a rule if the threshold is violated n times before it sends out an alarm to avoid false positive? Thanks
Generating an alarm if threshold is violated n times
I configured a server to generate the alarm if threshold is violated 3 times to minimize false positive. The threshold was surely to be violated, however it's been days now and haven't receive anything but if I manually test 3 times, I receive a notification regarding the alarm. Please help. Thanks
Two instances of SD+ on the same server. Possible?
I want to know if it is possible to have two instances of SD+ on the same server and have them act as different systems. The reasoning behind this is because we have another department in this company that would like to use the service desk product and we don't want them in our database. Is it possible to put service desk on a server twice? If not, is it possible for the same service desk to use two different databases? We are willing to buy extra licenses to accomidate this if it is possible. Thanks!
Looking to use software to centralize logs and events
Our network has 9 servers. I am wondering if anyone out there has used software to centralize logs and events for windows and other in house applications. Any feedback eould be appreciated. Thanks, Jimmy
OPMANAGER SMS MODEM
I need help with my op manager6 i have installed it on a windows 2003 server and now i want to configure sms settings. and now the problem i succeded once to install a nokia 6210 with serial cable on com1 and the sms server worked just fine for a while. and then i restarted the server for some update issues and after that the sms server couldent find the phone 6210 anymore. so i reinstalled the phone several times without any luck, so now i have orded a Wavecom M1306B gsm modem but the company that
NFA not using the timestamp fields
I'm developing an implementation of Netflow in a switch. Anyway I'm using Netflow Analyzer to "validate" my work and check if my netflow export packets are correctly formed. Everything works just fine, but I have the impression that Netflow Analyzer ignores the timestamp fields of my packets. Let's take an example: Imagine a continuous flow starting at 00:00. After 30 minutes, the flow is exported because of the "active timeout". The start timestamp of the netflow export is 00:00 and its finishing
Business Rules + Notification
Hi, I have a group called Support, where i have 3 techs assigned to it. Also I have that the 3 techs are notified when a request is added to the group, and 1 of them notified if the request is left unpicked for more than 1 day. Then I have a business rule, that the condition is that when the category is "Other", the request is added to the Support group. A new request is entered with the category "Other". The business rule works, because i can see loggin as 1 of the techs, that the request has Support
Display name in switchport alarms?
Hello, We are running Opmanager Build 6012. When a switchport goes down, we receive an alarm like "Port 24 is down". Would it be possible to use the port description (Display Name) in the alert, instead of the port number? Thanks in advance, Laurence.
Change URL for server
Hi, after I add user in the system then he receives email like this one: ------------------------------------------------------------- Subject: Your PassTrix password has been reset Login name : roman Password : fdfgsdg23 Click "here" to login to PassTrix now. ----------------------------------------------------------------- When I press "here" I goto https://server38:7272. "Server38" is server name but it is internal name. How can I change it to "www.test.com" for example.
Customize Alert Messages
Can I customize the Alert Messages with a specific subject? Currently the subject is a default "Alert from EventLog Analyzer". It would help us to identify from all these messages we get.
Database Clean-Up
Is there a simple way I clean-up my database? Remove entries prior to a certain date. My database is already 60GB and it takes a long time for the database/service to start. Also often the server stops collecting logs. I want to shrink the database and decrease the log retention size from 14 days to something smaller for now.
Technical Support
I am trying to get the JMX monitor to work through a firewall. I start the application with -Dcom.sun.management.jmxremote.port=8303 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false When I try to connect with the JMX monitor it times out. It looks like it is also trying to connect on a random port in addtion to 8303 according to the firewall logs. I am told this is due to the rmi connection that JMX uses. And I need to use something like service:jmx:rmi://localhost:3000/jndi/rmi://localhost:8303/serve
OpManager MSP Edition - Upgrade Pack 6002 Released
Hello All! A feature-packed upgrade for OpManager MSP Edition is available for download now. Here is a quick summary of what you can expect on upgrade 1. Google Map support is available. The Maps > Google Map View link allows you to generate a Google Key. Submit this key to integrate Google Maps. 2. You can add Trial Probes! This allows you to add Probes with 30 days trial period enabled. It facilitates demonstrating the monitoring solution to your customers. 3. Remote CLI is possible using the Telnet/SSH
Create a link in new solution???
Hi all How can I create a new solution to open a new link such as test.htm (the test.htm is a file on my servicedesk server )... Where should I place my test.htm file (on server running servicedesk)???? thanks :roll:
Monitors > Sun Solaris > <SERVER>'s Process Deta
In "Monitors > Sun Solaris > <SERVER>" view, I clicked on "Add New Process" and selected a process with "Process Name", smbd. There are >300 instances of this. The CPU utilization for smbd processes remains at 0% at all time! This is not the case if there is only ONE instance of the process running, i.e. the CPU utilization will be shown correctly. Is Applications Manager able to accumulate the CPU utilization for several instances of the same process? Thanks for this great tool though :D
Can't disable SQL alert
Hi, I am evaluating whether or not to purchase the OpManager SQL monitor. I am using OpManager to monitor a W2k3 machine with SQL 2005. I'm using the WMI SQL monitor to watch some stats. I am getting a lot of alerts about the MSSQL cache hit ratio. I've tried to adjust the threshold and have even removed that specific monitor, but still get notifications about it. What can I do? Thanks, arlyn
Setup done. Can't connect trough to SD
Hi I'm sitting with a problem. I'm testing SD to see if it will work for our company. The problem I have is that I have done all the settings in SD. Added users / pc's, assigned the users to the pc etc. If i start the client on the pc SD is installed it works 100%, but when I try and connect to that address from another pc on the network to log in as a user, I don't get the login screen. Do I need something like IIS installed on the pc or should the SD server work on it's own?? Your help with this
ServiceDesk Plus Training in US - New and Improved
We are planning to for ServiceDesk Plus training sessions in the US starting from the second week of May, 07. This training session will capture all the features in the latest version- ServiceDesk Plus 6. In our previous trainings, we shared the best practices in implementing an effective IT helpdesk using ServiceDesk Plus. You had to go back and implement all the best practices all by yourself in your environment. New and Improved: We'll implement the helpdesk for you - ServiceDesk Plus Experts
Inventory Filtering
I am trying to filter my inventory results using the RAM lesser than advanced filter and entering 256MB. This dosent work. It will show the same PC's everytime regardless of whether I use lesser than and enter: 256, 256MB, 256 MB even in bytes. Thoughts? Looks to me like it just dosent work.
MSSP model - How to use Kiwi Tunnel for multiple firewalls
I am new to the product and am having problems getting my monitored firewalls SYSLOGs back to the Firewall Analyzer. We monitor through IPSEC VPN which makes it difficult to get the SYSLOGs off of the Pixs. I was hoping someone could give me some pointers on how to do this with or without Kiwi. Thanks, Bryan
Some Authentication Problem - Error Code : 8002801d
I get this error whenever i add users and specify a home folder with a mapped drive in the profile. If its a bulk import, it will create the first user ok, then it will fail on the rest.
Technical Support: URL Monitoring
I'm passing the following URL: http://192.168.48.1:7001/momex/j_security_check?j_username=f9j3l1a8&j_password=kfdj876hfu%7H If I click directly onto the link within the HTTP(s) URLs monitor section, it renders the page and logs into the application. However, when it performs the test itself, the application throws an unsupported browser error. I tried passing the log in parameters through the Request Parameters (if any) to no avail. PLEASE ADVISE. I am using IE 6. Kenneth McCord
Technicians no longer in list of Requesters for new Requests
Since Build 5500, technicians are no longer in list of Requesters for new Requests. Can this be fixed? Thanks, Michelle
Technical Support
Schedule Reports does not work. No reports are being send as sheduled on 1st of each month. If i send the report manually then it works Max
Next Page