Clear Alarm Script
Is there a way to clear an alarm in OpManager using a script or SQL statement? If yes, what is the script or SQL statement. Thanks
When OpManager will support UPS General Electric ?
When OpManager will support UPS General Electric via Device Template?
Recover from Failed Upgrade (7012 to 7019)
On Friday we attempted to upgrade our 7012 installation with SQL to 7019, first taking a backup of the ServiceDesk using the backUpData.bat. When installing the update (7019 is the latest service pack) via UpdateManager.bat all was seeming to go well until the SQL transaction log rapidly increased in size beyond from 500MB to over 2GB resulting in the drive running out of space. At that point the update failed and the update utility reported it was rolling back the changes although a few seconds
alarm of locked account event
Hi, I encountered a probelm after I update ServiceDesk plus to the lastest version. I have set up a passive monitor for locked account event, when I scan software on a domain computer, the action will be successful, but I will get a alram of locked account event immediately, then I checked security event on domain controller, there is a failure adult shows domain administrator's passowrd located username field, can someone help me to figure it out? sorry for my bad english.
IPV6_App
We do not have any IPv6 nodes in our network. They are all IPv4, yet we are seeing traffic marked as IPv6-App. Do you know what is this. In two hrs the traffic reached 250 MB. Please advise. Thank you, aelrayah
IPV6_App
Our network is pure Ipv4 and we do not have any IPv6 running in any node, yet some stations are reporting IPV6_app running. Do you know what is this. In 2 hrs there is about 250 MB running between two ipv4 nodes. Thank you
Fyi - small jscript error message
Hello, just found a small jscript error, don't know if anything is affected by it, so pls find attached fyi. (using ie 6) Best regards
ServiceDesk Plus and IPCC Cisco Callmanager
Hi all,we've a Cisco callmanager 4.2 system with IPCC. We need to integrate Callamanager with Servicedesk Plus so that when a call arrives, customer digits his code id and cisco can send this information to ServiceDesk Plus and it can open the helpdesk operator web page with a new standard request page filled with customer informations. Is it possible to make this?
Exchange 2007 Monitoring Problems
Hi, I am trying to set up Exchange 2007 monitoring on Opmanager but can't get it to work. Are there any things i need to set up first to get this running. I have 2 Servers Running Exchange 2007 Hub Transport + Client Access Modes and 2 Servers Running a SCC Active/Passive Exchange 2007 Mailbox Role. Whenever i try to set up Exchange 2007 monitoring on any servers using any options all i get is the following error 80041010 - Specified class is invalid. Try running 'wmiadap /f'(For Windows XP and 2003)
OpManager APC symmetra
Hello, I am testing opmanager and I have a couple of APC symmetras. Opmanger does not seem to know how to deal with them. The ups load and status monitors do not work. When adding performance monitors the settings do not stay. Thank you
Reporting Changes mapped to Incidents (Requests)
I'm trying to report on Changes and their underlying Incidents (Requests) but the cross reference table ChangeToIncidentMapping doesn't seem to exist. "Base table or view not found, message from server: "Table 'servicedesk.changetoincidentmapping' doesn't exist"" Does anyone have a report that pulls Changes and the Requests they are linked to? Thanks, Scott M. Kelm MXenergy
Business rules processing order
Could someone please explain the processing of Business Rules better that that provided in the help section. I have some assingments based on email domain as well as on account. It appears that the processing ends with the first match, after that no more rules are being processed. Is this correct? Are rules are processed from the top to the bottom of the list? If so would it be correct to say that rules at the bottom of the list have the final say? I have a rule that sets the SLA based on email domain
Solutions issues (image and text problems)
Hi. I`m running Service Desk Plus 7 and i`m with some problems on Solutions area. I write all text, add imagens and do all fine. Eventually, the imagens just disapear as if they were with a broken link. Its like the software change the image path after some time. When i try to make changes, sometimes the software cut half of my text and some images.. I go back to check the text and it`s perfect! I save again and the same cut is done, I just lose everything (thank god I can go back and the text is
Problems with Updating from 7018 to 7019
Hello, just updated to the newest version, but now I am not able to start SDplus anymore. When I start the server manually I get the following error Messages: Could not find jndi.properties AdventNetServiceDesk: FAILED When I start SDplus in the browser I receive a 400. I tried to uninstall the new Hotfix but got the message: Sorry, uninstallation is currently not supported. So do I need to change any settings or is there another way to get it running? Thanks in advance!
Bulk configure alerts
Hi, How can I configure alerts for multiple monitor groups at the same time?
Availability Report - Not showing down time in mins
Hi, First of all brilliant product, having been using it for almost two years now it's proven to be invaluable now. We have recently upgraded to SP2 (Build 7200) and I've noticed that the All Devices Availability Report is in a new format which is pretty cool, however I report to management on the down time of certain devices in the old style of Hrs / Mins / Secs. With the new report layout I can only see the downtime in %. If I click on the "Old Data (Version 6)" link in the report window I can
live reports display values in negative form
i have upgraded firewall analyzer to the latest build. then all live reports for all devices that sends syslog to the server display vlue in negative. please advice
DB Backup Script Broken - Archive Question
I am using the newest ELA 5 on windows server 2003. I am trying to get my backup strategy going and there are lots of posts that mention the backup scripts. there is one in the ela\troubleshooting directory and one in the ela\tools directory. neither work for me. I have shutdown ela and try running both and I get an error in the middle of the process that says file now found. Now to my archive question. in the ELA\archive folder there is a folder for every host I am monitoring, and it also looks
Monitoring SAP Instances
Is it possible to add monitors for SAP servers installed on AIX machines? Roberto Mozzillo
Memory data not available + Unable to connect to jboss serve
Hi I installed Application manager in redhat linux and monitoring through SNMP the jboss and DB server which is in linux environment in the same network. Problem: ------- 1) while connecting to jboss(app manager installed in Linux)it is giving 'Unable to connect to jboss server' but Iam able to connect the jboss form windows installed 'Application manager' 2) Also not able to get the 'Memory utilization' details and disk utilization details its showing 'No data available to generate graph' Alby Smiles
installation
how to install it on linux and confige it mohammad
Reports
Hi guys, I am trying to create an availability report for all our servers for the last month. The report generates fine although when i try to create a pdf/print the report i just get blank boxes rather than green/red boxes. Any ideas or anyone else have this problem?? Please refer to below PDF Regards Jeff jsmith@sthilliers.com.au
OpManager 7.201 - can't see interface charts
We lost interface charts after we updated to 7.2 + Hotfix. Intefaces are shown and they show current traffic counters like this: 65540 HP NC7782 G... 1 Gbps 1 Gbps IF-sc-pd-acrm0... 33.623 kbps (0.0%) 99.681 kbps (0.01%) 0 But when I click on the interface to see details, it says: Sorry, no data available for Graph. Try other options 7-days chart shows data before the date of the Opmanager 7.2 upgrade. It happens for all devices: servers, routers, switches. Please help!
Employee ID in AD
Currently Servicedesk do not import Employee ID from the Option "import requester from AD" due to which its difficulat to log a requester for a requester with same name. E.g :- an organization have 3 employee's with diffrent employee id's Starting name James employee id 1234 ,James employee id 1235 and James employee id 1236. due to which technician is unable to record the request quickly and gets more confused which James has called up for the request. In Such case what we can suggest is get the
Changing Device Type
Is there an easier way to change the configured Device Type? Example: 10.20.30.1 - 10.20.30.10 - Cisco IOS Router should be changed to Cisco IOS Switch. Currently i need to delete the device and import it with the desired setting. There has to be faster way. In best case it should get the job done in batch mode. Roble
Netflow Troubleshooting graph/tool
Hi there, I see that when you are using the TroubleShoot tool/graph for an interface and you are searching a period greater than 6 hours, Netflow Analyzer graphs the data based on a 2 minute average. And subsequently over a 24 hour period the average becomes 5 minutes. Is there any way to configure this to display a 1 minute average? Regards, Lee
Unable to restore database : ... (File name too long)
The database is not restored! How to solve this problem? sd:~/AdventNet/ME/ServiceDesk/bin# ./restoreData.sh -c backup_servicedesk_7018_fullbackup_08_26_2008_06_00.data [...] Unable to restore database : /root/AdventNet/ME/ServiceDesk/bin/../fileAttachments/Change_ROLLOUTPLAN/May2008/78/\Arcserver\users\SAT\_Технический отдел\Телепорт (эксплуатац. документация)\Общие документы\Комплект ТО РЭ и схем\Альбомы на комплексы единичного исполнения\КБ НСС Э 0051 Богучаны KU\модернизация 08-05-2008 не введена\КБ
Search by service tag or asset tag
Hi Would it be possible to include in the next version the ability to search resource or workstation by service or asset tag. Users do not always know the name of their computer but can plainly see either the asset or service tag so searching on this basis would be a great help. Regards Mike
Asset Name autonumber
I want to create sequencial numbers for the asset names, for example all the monitors will be named as MON-0001, MON-0002,...etc, regardless of their product name. what I want is that SD+ autogenerates the next consecutive number when creating a new Asset. Is it possible?, I am thinking of triggers but anyway I would have to modify SD+ in order to make the new automatically created asset name visible in the user interface What is the best option for Asset names?, just consecutive names regardless
installation
how to install it on linux and confige it mohammad
SLA criteria
We need to add 'Group' to the SLA criteria list. We use ServiceDesk (ITIL)between IT infrastructure and Software development teams. Each group has its own SLA needs and escalation contacts. By simply adding group to the criteria rule we can avoid building a complicated mix of category, sub-category and item rules. Please advise if there is a simpler workaround for the time being. I�d also like to see further uses of the grouping ability in other functions too, and included in the 'business rules'
Unable to restore database : Syntax error or access violatio
The database is not restored! How to solve this problem? sd:~/AdventNet/ME/ServiceDesk/bin# ./restoreData.sh -c ./backup_servicedesk_7018_fullbackup_08_28_2008_06_00.data [...] ********************************************************************************* Database not started. Starting ......... 28.08.2008 9:15:28 com.adventnet.db.adapter.DBInitializer startDBServer INFO: Command to start DB server [sh, ../bin/startDB.sh, 33366, /root/AdventNet/ME/ServiceDesk/mysql/tmp] DB_HOME /root/AdventNet/ME/ServiceDesk/bin/../mysql
UpdateManager.sh without X11?
I am trying to Update DeviceXpert from Build 5100 to Build 5110. Calling the UpdateManger inside the /bin directory results in an error. How can i install that update package without being forced to an X11 installation? Roble deviceexpert-box:/opt/DeviceExpert/bin # ./UpdateManager.sh Exception in thread "main" java.awt.HeadlessException: No X11 DISPLAY variable was set, but this program performed an operation which requires it. at java.awt.GraphicsEnvironment.checkHeadless(Unknown Source) at java.awt.Window.<init>(Unknown
Scanned Software Advise Needed
I am finally, after 8 months going to tackle the Asset side of SD+, and was hoping to understand the best practice for allocating software to a Type? Okay my question, I have a heap of freeware, shareware etc that is simple enough, but how about these: >Intel(R) Graphics Media Accelerator Driver >Dell OpenManage >Dell OpenManage array manager >MS .NET framework Are the above excluded, managed?? Can someone explain how they are determining how theay allocate software, ot thier definition of each?
Report Profile Filters
I'm trying to filter on the traffic to or from a specific host. The problem is that the logic of the filters is the report profile section appears to be based on AND logic when OR logic is required. For example: If I want to see all traffic from an external IP address to my internal host named TAZ, I can create a report profile with a filter that has TAZ as the destination address. If I want to see all traffic that TAZ originates, I change the filter to have TAZ at the host intead of the destination.
PO always creates Assets?
Maybe it will be possible to add the possibility to create a purchase order but not a Asset. i.E. if we are create a po for consulting-services a asset will be created... thank you
Determine what Assets are associated to Product
I am having a problem removing certain Prducts from ServiceDesk. I want to determine what Assets are still associated to that Product but I cannot find out how to do that. Also, Is it possible to change the Product that an Asset is tied to. E.G. Change a T61 from the Product T61 to Lenovo T61? Thanks
Error while unpacking
Having let a version of ServiceDesk Plus lapse and have now tried to uninstall then install the latest version which I have a licence key for. However I am now getting the messages "Error while unpacking" over another popup box saying "Extracting compressed files". This comes instantly after the install is informing me that it is "unpacking jar files". How do I continue ?
FortiGate 200A
I have a Firmware Version Fortigate-200A 3.00-b0565(MR5 Patch 2) I Configure it to use syslog server Minimum log level: Information,Facility:local7. and in the firewall Policies i enable log. as in the user guide. but still no information in my firewall analyzer. any advice ???? note:should i enable the CSV Format or not. Thanks alot
Queries about products ( delete and modify )
Is it possible to clean more that 1 product ? it sems that only is possible one by one Another question about procducts. After add products in an account, is not possible to update. If a customer buys another license of a product I need to delete the product and put the same only canghe the number of licenses. Exist a method to update without remove/restore process ? Patch 7008 with products in contract solve will solve this problem ? Regards.
Next Page