Recovery Partition Problem
Hi, I have created an Image from a pc with windows 11. It has a recovery partition of size 700 MB. Today I wanted to deploy this image to a PC which had window 10 with recovery partition 500 MB , but It failed with the attached screenshot error. I tried
OSDeploy
Hello, After the upgrade to the newest version i have problems with deploying new PC's. the deployment keeps hanging on the screen to change the SID. eventually it will just time out.
OS Deployer AutoCollectDrivers All fail to install.
I'm not sure what is going on but all the auto collect drivers always say fail to install and it just remains existing drivers. I moved the primary driver collection to a new location, same location as manual drivers which all install fine. It does this
OS Deployer - PXe troubleshoot
Hello, We are using Manage Engine's PXE troubleshooting tool to check if the PXE Server is in good conditions but im getting this error: The service that is causing this is part of the desktop central. How can we solve this issue?
OSD replication to remote office stuck on "Yet to start image replication"
Hi, I am having issues when replicating images to a particular remote office. In the example, I have 2 remote offices, I have a W10 image and a W11 image both captured and stored in the local office image repository. When replicating either of these images
Reinstalled OS Deployer But Old Hotfix Info In Update Manager?
Has anyone had this issue before? I was having issues with OS Deployer so I uninstalled it and reinstalled it. Well the version I installed was 1.3.2513.1. If I go to the update manager though, it says that 1.3.2519.1 was already installed. I can't uninstall
Bootable Media unable to unmount wim
Currently, I am testing the OS Deployer feature. However, when I reach the step of creating bootable media, I always encounter the error: 'Unable to unmount WIM file in the server path. Try again after some time or try using another WinPE tool.' I have
Deployment template - Bulk modify
Hello! When I try to modify more than 1 template at a time I get the error "no credential specified" What credentials are these and where can they be set?
Operating System Loader has no signature. Incompatybile with Secureboot. All bootable devices failed Secure Boot verification
Our os-deployer has not been working for several weeks. During the installation form pxe we have message like in topic that Operating System Loader has no signature. Incompatible with SecureBoot. I tried already create new PXE media, but without success.
booting to USB CMD window
After creating the boot Among, for example, USB and writing to a flash drive, booting to USB, I get a CMD window with the inscription x:\Windows\system32\wpeinit and nothing else happens, it feels like the boot environment is not being created correctly,
USB Boot x:\Windows\system32\wpeinit
After creating the boot
Among, for example, USB and writing to a flash drive, booting to USB, I get a CMD window with the inscription x:\Windows\system32\wpeinit and nothing else happens, it feels like the boot environment is not being created correctly,
After Update OS deployer fails last reboot
I am wondering if anyone else is experiencing an issue were the last reboot when deploying an image is failing, because it is timing out. We just recently updated to our Endpoint server to the latest build 11.3.2416.30. This issue wasn't present until
TimeOut during image post deployment
Hey everyone, just updated my image to the new 24H2 update, not sure if it is because i am doing something wrong or... but I have noticed i cannot go past the machine restart phase of the post deployment. anyone experienced a similar situation?
OS Depoyer fails to assing static IP
I am attempting to deploy images via bootable USB. We do no use DHCP in our environment, so when booting in to WindowsPE we have to assign a static IP address. I fill in the requried information and click "Save" and get the following error "Static IP
PXE Boot Issues
When I start a deployment task and reboot the target machine, PXE boot will not start for me. It will just load the startup menu after 30 seconds or so. I have added options 66 / 67 to our DHCP server (Palo Alto Firewall). I am able to capture an image
Dell Latitude 5540s Crashing After OS Deployment
We just received a few Latitude 5540 for deployment. We tried multiple times and different ways to get Windows 10 Pro to work correctly on these laptops. Every time we image one, it finishes successfully. We go to log in (local or domain login) and it
Unable to create bootable media
I keep getting this rather un helpful message: - "Unable to create bootable media. Try again after sometime" Does any one know what it means or how I can fix it? Thanks Tom
Bacup User Profile Failing
I'm not able to back up user profiles. I've tried the on three PCs, but it keeps failing. It installs the components, then the status says: Fetching User Profile details It stays at this status for a long time, then Fails. Under remarks is says, "Unable
Application Installation problem- Error 0
OS deployment is going smoothly and in the post deployment tasks I got errors for all application. For example [Application Install]>Unable to install "ESET". Error (0: )
Lenovo ThinkBook 15 G2 imaging
I'm attempting to image a Lenovo ThinkBook 15 G2 laptop. It appears Lenovo has Full Disk Encryption (FDE) on by default and I cannot find a way to disable it. Mone on FDE here: https://support.lenovo.com/us/en/solutions/ht002240-full-disk-encryption-hard-disk-drive-frequently-asked-questions
Error Deploy OS
Hi Afther Start Deploy OS Error OSDA.exe Spplication Error The instruction at 0x96714617 reference memory at 0xfffffdf0.the memory coild not be read Click on OK to terminat
Not enough storage for imaging?
USB Boot media... When I try to create an image it shows not enought storage on the repository.... Real free space on server is 236GB, If I uncheck WINRETOOLS & DELLSUPPORT partitions it works (I assume beacuse total image is around 2GB smaller) but ¿It
Memory Leak in ImageReplicator.exe
We run Desktop Central with the imaging component. We have about 14 branch locations with a distribution server in each location. We have been receiving periodic memory alerts from the distribution servers. When I log into the distribution server,
Bad system config info
Hi, I'm testing the OS Deployment in DC. I created an offline Image (with USB Media) of a a Dell Precision T1650. After I deploy the img on an Dell Precision T1700 I got an BSOD error if the system boot up: BAD SYSTEM CONFIG INFO Both systems are on UEFI and have the same SSD (Samsung 860PRO) installed. Windows repair can't repair the error. Any idea why I get this error and how can I solve it? thx, Bye, Clou
Remote Office PXE Media issues
I have 1 remote office that will not publish the PXE media, error: Unable to publish PXE media files - Network error occurred HTTP error code <404> There are no communication issues with the server hosting the remote office this is fully reachable from
OS DEPLOYMENT not adding computer to Active Directory W10v1909
I been using OS Deployment for nearly a year. As of recent I upgraded a PC with Windows 10 v1909. I went to deploy that image and it can no longer add the computer to the domain. It get's stuck on Post Deployment task. See screenshot. I even created a
Installing Office 2016 post OS deployment
Hi. I have Office 2016 added as an application to install following the Deployment of the OS, however it's not installing. The DC team are being less than helpful- just advising that the command is wrong, which it's not as I've ran it on the PC itself
Cannot edit or delete a "Target computer(s) domain)"
How can I edit or delete a "Target computer(s) domain)", i can only find the option "Add Domain" in Desktop Central, OS Deployment, Deployment templates?
Cannot deploy an image to a Dell XPS 15 (9560)
I am having trouble deploying an image to an XPS 15 9560 BIOS 1.2.4 HDD: m.2 PCIe SSD-0 Using OS Deployer 5.0.3.136 I was able to successfully create an image from the laptop, but when I deployed the same image back to it using the bootable USB and running the agent, it blew away all of the partitions and volumes and the machine was unable to boot to a hard drive. Options used for deployment task: Set to deploy to default disk Set to erase target disk data and occupy disk space entirely I have since
installing hp Pobook 650 G3
Hello, We are uploading an image with os deployer (latest version) on the new HP Probook 650 G3 but we cannot see the nvme hard drive and the onboard nic. is there an easy way to fix this ? Thanks very much
Unable to Deploy Image on Lenovo X230 Laptop
Hello Team, We recently upgraded our OSD server in to 5.0.3, 136, But unfortunately we are unable to deploy image on Lenovo X 230 laptop, also some X series laptop. Its just start & failed appeared in deployment task. Kindly suggest to narrow down this issue.
Resizing is unavailable.
I am unable to deploy a Windows 10 image with three partitions, in 5.0.3,124 I receive this error: Host '10.16.102.64' has failed the deployment. Additional info: -------------------- Error code: 1 Module: 52 LineInfo: 6934824D6BD2F69E Fields: $module : "osd_server_vs_3124" Message: Host '10.16.102.64' has failed the deployment. -------------------- Error code: 15 Module: 51 LineInfo: E3394061D0E3A517 Fields: $module : "osd_server_vs_3124" Message: Failed to assign volume '2'. --------------------
NIC drivers problems
Dear, I'm trying to deploy a image to a Dell Optilplex 7040. Osdeploy doesn't recognize the nic driver. Please advise on how to continue. Can i put the drivers somewhere on the server or is there a other possibility?
PE Builder USB drive corrupt
When I use PE Builder to make a USB bootable drive for the OS Deployer Agent, it loads up DISM and Diskpart as part of its processes, and seems to successfully copy files, but the resulting drive is not formatted, it appears as RAW and is not bootable. This happened on two different machines, both with the Microsoft PE toolkits installed and working. Partitioning/formatting the disks before building the PE makes no difference. I am able to create .iso files using the same buolder with no problems.
unable to deploy image
I installed the Os Deployer software on a server which went fine. I have managed to create an image from a computer. When I want to deploy that image on a new hard drive to a similar computer it will not work. I can boot the computer via PXE boot and boot into the deployer agent but then it gets troublesome, I get the following errors Bericht - 1 (0x340001) : host 'ip adress' failed to deploy - 13 (0x33000D) : operation was cancelled - 3,407,876 (0x740004) : specified session id not found - 0 (0x640000)
Client not responding after deploy
Have tried multiple desktops and the scenario is always the same. Boot desktop up to osdeployer agent> Osdeployer sees this machine as being online > Deploy image to the machine > Shows about 4% completion and then fails. error log: Client 'x.x.x.x' is not responding error code: 1 module: 52 we are running osdeployer 4.0.2
Problem deploying image in Os Deploy 4
I just upgrade my osdeploy 3 to 4. After the upgrade i tried a deploy of a workstation (Dell Optiplex 7010). It fails directly. Same Image as the one I used in the 3. Also same machine that has succeeded with Osdeploy3 .I have also included the log file. please advise Kind Regards Tim Verduyn
No mouse or keyboard in Hyper-V with OS Deployer
I am trying to capture an image of a VM in Hyper-V, but when the "Master Image Creation Wizard" starts the mouse and keyboard do not respond and I cannot start the wizard. I think it might be driver issue, but I don't know how to fix it. Can anyone assist?
OSD: Error E0064001C: Unsupported Protocol
The rest of the error is: Deployment server is not installed on this host or it has a different version. Occurs when trying to deploy an image. We have already successfully created an image (Windows XP) and deployed it; this is a second image (Windows 7 Pro) successfully created but not successfully deployed.
Windows 7 not joining domain
We have tried everything, checked credentials etc but our image will not join the Domain. It has been taken from a Workgroup based machine. If we join it manually after the process it works fine using the same credentials in the OS Deployer settings. Any ideas?
Next Page