OpManager server fails to start
Hi, I'm evaluating OpManager, and it's working fine on our LAN, but when I tried to install it on another box (2003 server) in another LAN we have the server fails to start. It seems like it has problems with Tomcat. I'm running it on port 50080 and we do have another Tomcat process on this box on 80 and 443, but I doubt this is an interfering factor. 50080 is responding with an "Internal Server Error". I have attached the log files from OpManager's internal Apache web server and Tomcat server. A
OpManager DNS resolution
When discovering devices, many appear only with the IP address and not the name? Can you please explain how OpManager resolves the name, for example, using DNS reverse lookup (IP) or WINS (NetBIOS)? I see from a forum post on Firewall Analyser (http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002677505) that there can be timeout issues. Could this happen with OpManager. Thanks, Mark
OpManager Version 6.0
Hi, I was when the new version of OpManager 6.0 will be released? Will it be released this year in December or will it be in January? Also, what new features (both major and minor) can we expect? Thanks.....great product!
No Percentage on Disks....
It would be nice if you could set disks to percentage rates for full rather than for specific GB or MB ratings. It would also be nice if one could set general categories, e.g., "OS Drive", "File Server Drive", etc. and give different values for these types of drives, then rather than assigning "90%" to each OS drive individually you could just set that drive to "OS Drive". David.
SNMP Trap Processors don't work
Hi there I am trying to setup some trap processors for a Fortinet FGT-60 device. I am seeing the following in my unsolicited traps view. No Trap Parser defined for received trap: TrapOid : .1.3.6.1.4.1.12356.0.301 Variable Bindings: sysUpTime: 1 day, 22 hours, 56 minutes, 47 seconds. , .1.3.6.1.6.3.1.1.4.1.0: .1.3.6.1.4.1.12356.0.301, When I click the Create Trap Processor button and add that to be marked as cleared the traps keep appearing in Uncolicted Traps. I have tried to disable and enable
Windows Server 2003 MIBs don't work
Hi folks, We're currently evaluating OpManager for our organization. There are several custom SNMP monitors I want to setup utilizing dhcp.mib, ftp.mib, http.mob, and inetsrv.mib, which are all found under c:\windows\system32 on a Windows Server 2003 install. I copy these MIB files to the $OPMANAGER\mibs\ directory. When I attempt to "Load MIB" within OpManager's MIB browser, it fails trying to load any of these MIB files with the error: "Error parsing MIB: foo.mib". What's the deal? How do I load
Monitoring Cisco 2600
Hi, I have a Cisco 2651 which I was successfully monitoring with Opmanager. Out of a sudden opmanager stopped reading statistical information from the Router interfaces. I have deleted the device and re added it. OpManager detects the router correctly and list all the interfaces but can not get any information other than the IOS version it is running. Other routers on the same OpManager are working fine. Thanks Ramzi
Deleted Netowrks Stay
I'll delete a network from the discovered networks, the page refreshes, they're gone, close browser, reopen still gone, BUT they will reappear upon system restart/restart of the OpManager Server. Any ideas of the cause? Notes: I'm not using the default 'admin' account-but I am using an account with all the admin privlidges. Any idea why the database doesn't 'keep' my networks list? If I add a network it will stay just fine-it's removing them that I'm having issues.
Avaya S8700 MIB
I am receiving and Error parsing MIB when I attempt to load g3mib20_ASN1.txt. Has anyone tried to use this MIB ? Thanks
snmp on 3com superstack
I am trying to add snmp based traffic monitoring to a 3Com supersatck 4900 switch. when adding traffic monitors -> Interface RxTraffic, interface Tx Traffic etc and run test monitor, I get an error message saying no response from device and with possible resons: Snmp not enabled etc. When I go to the mib browser and use RFC 1213, go to ifInOctets etc and do a get, I get a response with the counts for the traffic. (so I suppose it is not a problem with the passwords and community strings?) The swich
Monitor Temperature
Hi, I wanna know if OpManager can monitor the temperature of a device. Thank's
E2002: Specified OID is not implemented.
hello, i have installed a trail version of ManageEngine OpUtils 3 on PC and start snmp service on other PC run windows 2000 pro sp4 , i want to monitor the cpu usage of that node , but when i enter the ip address and press "show" , an error : E2002: Specified OID is not implemented. how can i make it ??? thanks!
Cannot add new windows service monitor
It says: Error # Access is denied Help would be appreciated
3COm superstack SNMP Monitoring
Hi I am trying to get a 3Com Supersatck 4900 switch monitored with SNMP using OPMANGER. When I go to the Traffic monitors Rx traffic TX traffic etc and click the edit button and run Test monitor I get "monitor does not respond to test request". I have got this running correctly for a similar switch before but now cannot figure what is wrong in the present case. Any suggestions much appreciated.
Localization of the Russian version of the program
At a forum, you spoke that in the third version, there will be a support of Russian, but, we so there and have not found her. Tell please, whether there will be in the program, a support of Russian?
Adding Powerware PowerMIB (XUPS.MIB)
Hello. Can someone please tell me how I can add XUPS.MIB ? Is it possible ??
Avaya Cajun P330 and P550 switches
Hi, I am wondering if it's possible if you can manage Avaya Cajun P330 and P550 switches. If I put them in Opmanager but then you only can see if the switch is responding but not see other features..
Req. Info
hi i m unable to see cpu usage from opmanager . it shows me mem,disk usage .but in case of cpu it shows 0% always . currently i m using debian servers. i have configure monitor in opmanager snmp based. pls replay regards: jitender
Views and login page.
Opmanager has these sections by default: Servers, Routers, Firewalls, Switches, Printers, Desktops, URL How can I change or add to these? This is what I would like Servers, Routers, ColoServers, Switches, URL I don't need Firewalls, Printers or Desktops. How can I change this stuff? Ok now the login page says: First time users : Use "admin" as User Name and "admin" as Password to login. How do I edit this page? We allow our customers to login with a user name and pass and would like to put that there
refreshing of page
dear support, why is it that unless i refresh the page, i wont be able to see the changes in the screen? like when an alarm goes off, i will not know unless i refresh the page. Am i missin something? Apart from alarm escalation, i would wanna see the alarms on the screen without me refreshing it.
Cannot unmanage all the desktops
Is there a way to unmanage all the desktops at once
Remote Access monitor
Hi I would like to monitor remote access connections (RAS) to my windows server 2003. Information as : who are connected, how many users and for how long time ?? I can find some of the the information i Microsoft performance counters, but i can't seem to find it in Opmanager....
When OpManager 6.0 will be available?
When OpManager 6.0 will be available?
OpManager and Applications Manager integration
Do you plan any integration between OpManager and Applications Manager? It would be great to add more advanced apps monitoring to OpManager.
c:\Winnt\My.ini
I need to know what OpManager does with the above file, as I have had some severe problems with MySQL and OpManager. When I carry out a default install of OpManager, MySQL will not startup unless either I edit the config file for OpManager to use the same information as c:\Winnt\My.ini (e.g. port, user, password) or I copy the Netflow Analyzer StartupDB .bat and modify accordingly. Why do NetflowAnalyzer and Firewall Analyzer install fine but not OpManager? I have lost two sets of data so far...
Load Kagoor MIB failed
Hi, Anybody ever try to load Kagoor Mib into OpManager? I tried but failed. Attached is the mib file.
OpManager 5.6 monitor Cisco 6509 CATOS7.6 and IBM RS/6000
Dear Sir/Madam, We are evaluating OpManager Professional Version 5.6. For our environment, We have cisco network device cisco 6509 CATOS and IBM RS/6000 AIX 4.3,5.1,5.2. The product can find the device and host. But there are some problem as follow: please tell us how to solve them. 1. For Cisco6509 CATOS7.6, we can monitor memory usage. But for CPU Usage monitor, testing via MIB browser show us is error. 2. For AIX, we can use telnet method in oder to monitor is CPU and memory usage? Please tell
Exporting Graphics
I would like to export some graphs/graphics dynamically to other locations to be included in html. E.g. The Infrastructure Snapshot to be placed on our Intranet. Any ideas?
Logging into OpManager from PC via IE6
Hello, I am new to OpManager and I have the SW loaded on a Windows 2003 Server. The web client works fine on the server but I cannot connect from my PC using Internet Explorer 6. I get "page not found". I turned off IIS as a startup service since OpMgr wanted to use port 80 and it has its own Apache web engine. This scenario also holds true with ServiceDesk Plus we have loaded on the same server. Any help would be greatly appreciated. Will
Opmanager to monitor the CPU usage of Linux server (re-post)
(The last post seems had problem, so re-post again) I use Opmanager to monitor the CPU usage of Linux server, but the result always show "-1". Is the opmanager setting problem ? Thanks ~
tcpConnState: 4
Hi Folks, I keep getting these error messages from Cisco 3550 switches. What does this mean? And I was hoping anyone knows how to fix this. Thanks in advance for any insight. AY>
Monitoring of multiple drives
Hi, I'm a OpManager newbie, and currently in an evaluation process. Very impressed so far. One question though; how do I specify monitoring of multiple disk drives on a single server? I found this topic: http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002634231, and the respond <quote> 1 . Host Resource Graphs - Uses SNMP to query the Data. 2. Windows Performance Counters - Uses WMI 3. Linux Performance Counters - Uses Telnet/SSH 4. Solaris Performance Counters
Linux Agent in OpManager
I have a problem for using OpManager. I have installed opmanager in one linux server and want to use it to gather other linux server's CPU, Harddisk and RAM information. I tried to install net-snmp and AdventNet SNMP Agent for Linux in the linux servers. My OpManager can only recognize that the servers are Linux OS, but it cannot get any information of CPU, Harddisk and RAM. How could I use OpManager to get the CPU, Harddisk and RAM information from Linux Server? Thx!
Cannot Start OpManager
From the web browser I receive the error message "Error in downloading client files from BE". The server where opmanager is running shows the splash screen with "Configuration completed" and some dots on the bottom. This does not seem to be active. Help Server: Windows Server 2003 with SP1 Opmanager 5.6
OPManager 5.6 default "admin" user
hy everybody, it possible that delete the default user "admin" ? or change the access from full to limit? thanks for help, chris
Maximum number of devices (interfaces) supported
Hi, What is the maximum number of devices that can be monitored and reported with the following configuration? Pentium 4 3 Ghz 2 GB RAM Thanks, :?
ZyWALL and opmanager
I just started to implement OpManager at my work, and i discovered a problem, we only use firewalls from Zygate, and when i add our ZyWALL, i get a firewall with 12 ports, and 9 of them are down, and one is unmanaged, and only 2 ports is online and working. There are about 7 ports in this ZyWALL, how do i correct this issue?
Netscreen 208 MIBs
Hi, We have received new mibs from Juniper to monitor the Netscreen 208 firewalls. I am having problems loading the mibs into OpManager. The error message I am getting Error parsing MIB:NS-VPN-PH1.mib I downloaded the mibs from http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002635077amp;highlight=netscreen but I am still having the same problem. Attached are the mibs I received from Juniper Thank you Ramzi
Call batch file with arguments
Hi; How would I pass the 'error' messages to a batch file (c:\alert.bat) in the notifications. I would like to pass in all the same things you can access from the email profile: Message: $message Device: $displayName Category: $category Error Condition: $stringseverity Generated at: $strModTime Thanks Aubrey
Friendly Name in Reports instead of Device Name
In the server availability report, I would prefer to display the name I have entered for the server instead of the name it picked up from the reverse lookup. Is this possible? This is the case in most of the reports.
Next Page