Feature Request
Can you please add multiple thresholds on resource monitors. Right now you cannot warn someone if a filesystem is getting low on space and then have it send out another critical warning if the same resource drop to low. For example.. Set the threshold to send out a trouble notice if the free space on the / filesystem gets below 1GB and also send out a critical notice when the / filesystem gets below 500MB free.
"Device Not Responding"
I am getting a number of devices that show not responding, I suspect since OpManager is doing a single ping to the device or not allowing for multiple retires before alarming. Is there a setting that can be modified to help reduce this problem?
Reset admin password
For the life of me I cannot remember what I changed the admin password to. I was doing a demo and I stinking changed it so they couldn't use the default admin / admin, but apparently I went against my normal passwords and put something that I just can't remember. How can I reset this. Thank you.
WebServer no run under Linux Ubuntu
Hi, Sorry for my very bad english. I installed latest opmanager under Linux Ubuntu (Dapper). The installation was sucesfully on webserver por 8060 (port 80 is in use from apache server). When run ./StartOpManagerServer.sh command said "webserver not running" and shutdown opmanagerserver. When run ./StartWebSvr: ./StartWebSvr.sh: line 38: /opt/AdventNet/ME/OpManager/jre1.4.1/bin/java: No existe el fichero o directorio Syntax error on line 51 of ./conf/httpd.conf: ServerRoot must be a valid directory
Next OpManager Release date?
Is there a timeframe for the next release of the Non-MSP version of OpManager? Thanks!
Problems with snmp collecting data
after i installed and configured my opmanager, i hade added one object to : (linux box) , then it found the linux box and collect some datas, and created ok . after this , any host added to system or the same first host added don�t have data collected any more . i made one test : clicked on object , then at resources monitors, then at cpu utilization and click at test monitor , see what it answer : The Monitor did not respond to the test request !!! all my objects are with the same problem... i dont
Fail to collect data with custom monitors
I'm currently trying to create a custom monitor for my APC enviroment module to get the temperature in my server-room and produce graphs from this. I've located the oid to use with the mib browser but when I create a custom monitor and I do a test-run I get a message saying that it couldn't collect the data and asks me to make sure that snmp is running on the module. I'm running OpManager 6 with Linux Fedora Core 5 and have net-snmp installed.
OpManager MSP version
I am running OpManager MSP. My current build number is 6001. Can you tell me the latest version and where to download it from please.
Device status
I need to monitor the status of some IP camera's. OpManager needs to check if the camera is up for every 15 minutes. If the camera is down, it should directly send me a mail. If the camera is down for more than 60 minutes (4 polls) it should send me a SMS (this is a mailbox that forwards the message to SMS). I tried a lot of tresholds on the camera's, but i can't figure out how to configure how i would like it. I also tried Alarm Escalation Rules, but here i can only create an escalation when an
ssh Cpu Utilizastion
Hi Guys I am currently switching between opmanager 5.5 on linux to Opmanager 5.6 on windows How ever when performing the cpu utlization via ssh it is not working. I have noticed there is a change between 5.5 and 5.6 intowards the command it runs to retrieve the information 5.5 /usr/bin/vmstat 1 3 5.6 top b n 1 | grep 'CPU[0-9]* states:' All other resource monitoring via ssh is working fine At this stage I do not want to use ssh Please advise me on how to fix this problem
Oracle SNMP in Windows
I am trying to configure SNMP ir order to monitor Tablespace Used, I have configured everything in Windows SNMP & Oracle Intelligent Agent, as it is in the documentation, but when I test the monitor always appears: Test results The Monitor did not respond to the test request Summary Device Name sve001001-202.la-seguridad.com Monitor Name OraDbTablespaceSizeUsed Protocol SNMP OID .1.3.6.1.4.1.111.4.1.2.1.4 Possible reasons 1. Check if SNMP is enabled on this device. 2. The SNMP request might have
Opmanager MSP + ServiceDesk Plus Integration
Hello, I am trying to figure out how to do the following.... -Deploy Opmanager Probes to various clients (4) -Allow all different clients to use the ServiceDesk Plus Helpdesk but only see their own tickets and information -Use the functions of ServiceDesk Plus for each client (Asset tracking, etc) Is this possible? Thanks for your time.
Since yesterday high cpu load (50% java.exe)
Hi, we've opmanager since a few month. since yesterday the the server has a very high cpu load (constant 50% by java.exe). there is no discovery in progress, we didn't have added new devices. i turned off opmanager, execute repairdb.bat an restart the server - but this has no effect. before yesterday the cpu load was about 3-5% Opmanager: 6.002 Java: 1.4.2_08 Any idea? thanks, martin
Event Log rules
I find the configuration of event log rules rather confusing. Our previous monitoring software was designed so that user notification profiles specified the level of event that the user wanted to see (warning, critical, error, etc.), but other than that, all events for that level and above were alerted by default. You could then add filters to block events (based on error type or text strings) by device, device type, or globally. This seemed very logical, since you could not know in advance the types
Error parsing MIB
The error message "Error parsing MIB:xxxxx" occurs when i try to load another mib. Please help me to solve it. Thanks. RioYang
OpUtils3.2 can't start
install at windows2003 firebird server is runing. but OpUtils3 cant start. always stop at Loading MIBs......... and have no responses. why? how can i do?
Problem clearing/deleting alert
I'm having a problem clearing or deleting certain alerts, and I wonder if it's because the selectedEntity string contains a special character: http://10.10.0.69:8999/fault/AlarmOperations.do?viewId=Alerts&displayName=&viewLength=25&FROM_INDEX=0&isAscending=false&source=nylimrps-dc01&methodCall=clearAlarm&selectedEntity=nylimrps-dc01_COM+ I can clear/delete any other alert except those that contain the COM+ string. If I try to clear/delete the alert, I get a blank page - no errors - and nothing is
OpManager Table-Friendly Name
I am trying to find out what table in the opmanagerdb stores the Display Name as displayed via the web interface (the one we can change via Device Properties). Thank You, Martin
HOW TO MONITOR LINUX SERVERS CPU AND MEMORY UTLIZATION IN GR
hI WE NEED HOW TO CONFIG CPU AND MEMORY UTLIZATION REPORTS IN GRAPHS. WE INSTALLED AND CONFIGURED IN WINDOWS SERVER. HOW TO MAKE LINUX CLINET FOR ABOVE REPORTS. samba
Header Views for users
Hi, How can I remove the "Register" and "Talk Back" links from the Header for all my users? Is there a conf/xml file under the users directory I can edit? Thank you. Mike
Missing Events
Hi, We are testing OpManager in parallel with some other products and we have noticed OpManager occasionally misses Events. I have event monitoring set for 30 seconds, and monitoring of domain controllers set to 1 minute. For the time being, I am only testing for accounts being locked out or unlocked. I would say we miss 2-3 events out of 10. Any suggestions??? Thanks Matt
ServiceDesk Integrations Issues
Using the demo of Opmanager 6005 and ServiceDesk 5501 I setup Add-On/Product Settings in Opmanager. Whenever I click on ServiceDesk within Opmanager I get the assets details but when I attempt to go back to Opmanager, I get the following: "Your session had been timed out for security reasons. Please re-login." Another issue is that when I click on some devices I receive the message "Unable to fetch Hardware Details from ServiceDeskPlus. " -I have verified that the device does exist in ServiceDesk.
Can I monitor a UNIX system using commands
I am trying to monitor specific things happening in my Linux based Jasomi Peerpoint. The item I am trying to monitor is displayed when I logon to the device and issue a "show count" command. This shows me the number of registrations on the Peerpoint. How can I monitor and graph this? Thanks,
Oputils no longer starts
The oputils service suddendly stopped working, there were no changes made to the system. Event viewer indicates a wrapper problem, where do I locate the logs? Thanks, Gene
SNMP only working for SOME monitors
Im working on setting up all our Cisco switches, routers and access points to use SNMP. I have been successful on about 10 and having problems on 4 ... and I have 40 more to configure. The problem that Im having is that I configure snmp on the switch, and then set up the monitors in opManager, test them and one, say the CP Utilization will work and then the Memory Utilzation wont work... however if I come back to the snapshot an while later they will work... it seems very intermitent. Any suggestions?
current build number
What is the current build number of OpManager 6.0
No CPU and Memory utilization on Cisco router
Hi, I've set my Cisco router C1812, Version 12.4(4)T1: ip inspect name fwinspect snmp alert on audit-trail on ip inspect name fwinspect snmptrap alert on audit-trail on no snmp trap link-status snmp-server community xxxxxx RO snmp-server ifindex persist snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart snmp-server enable traps vrrp snmp-server enable traps tty snmp-server enable traps eigrp snmp-server enable traps flash insertion removal snmp-server enable traps isdn
Ability to configure Multiple states, thresholds and actions
Hi all, First of all.. Probably I'm putting this in the wrong place but I couldn't find a clear place for feature requests.. Sorry for this in advance.. :) OK.. I would like to suggest this.. ;) I miss the ability to specify multiple alarmconditions depending on the state of the device. Especially when you try to monitor UPS's, Relative Humidity or temperatures it might be an incredibly nice feature if you would be able to use several more states than only Trouble, Attention and Critical.., which
Notification Profile Error
Hi I am trying to create a E-Mail notification profile (Followed the methods from the manual), once the profile is submitted, the page just shows an error. Why is this happening Kindest Regards
OpManager not finding devices correctly
Ok I have install OpManager and applied the lastest SP to it. I have the SQL back-end working properly. Now the problem is every device I try to add comes up as a desktop. I made sure that I have the right community string set and SNMP enabled on the devices I am trying to add. I have different comunity strings for certain devices and I have tried them all but they all come up as desktops. I have uninstalled it and reinstalled it but no luck it still want find the devices correctly. Also for the
Why the device can not be appeared!
I add an network 200.200.200.0/24 to search,in this network,there only have two devices,one is Cisco 2950 Switch,another is Cisco 2600 Router.twenty minutes elapse,I want to go to "Infrastructure Views>Routers" to see Cisco 2600 Router ,but there is empty,no icon of Cisco 2600 Router,then I go to "Infrastructure Views>Switches" to see,there has an icon of Cisco 2950 Switch, last, I go to "Network Views>200.200.200.0" to see,there is only one device icon which is Cisco 2950 Switch icon. So,I input
Cisco router configuration
We want to use OpManager to monitor routers provided by one of our vendors, and they prefer to limit the MIBS available via the "SNMP_SERVER VIEW" command in the router configuration. What are the minimum MIBS we will need enabled in order to discover the router and monitor the traffic stats on the interfaces? Thanks, Andrew Williams
Cann't login:(
version 3.2 winxp-pro sp2 firefox 1.0.6 or ie6 sp2 An Error occurred! Tool Name : Message : Root Cause : Send this Issue to OpUtils Team Click here to create the support file to be sent to OpUtils team. Sender's email id : User Message : OpUtils is creating a Support Log File this may take sometime. (depending on the load on the server and the size of the log file). Please save the file locally and mail the same to support@oputils.com Support File Created The file creation is complete. Download the
One Alarm---->One Notification
Hello, im totally new in OPManager...we have installed it and our server sends notification when an Alarm occurs. But unless you cleared it, OPmanager sends further notification about the same alarm.....what can i do, to tell OPManager "please send only one notification for one alarm" i didn t like to have so much email messages in my postbox please help
NETWORK monitoring
i want to know the software by whome i can check the ystem information about hard disk.........RAm etc
Device Type
Hi all, I would like to add a device type to a group (server) and i can not find how to do ?! I select each server to attribute the device type but with 20 servers, it is a little bit long. Can you help me please ? tvmlminh
Device Type
Hi all, I would like to add a device type to a group (server) and i can not find how to do ?! I select each server to attribute the device type but with 20 servers, it is a little bit long. Could anyone help me please ? tvmlminh
Device Type
Hi all, I would like to add a device type to a group (server) and i can not find how to do ?! I select each server to attribute the device type but with 20 servers, it is a little bit long. Could anyone help me please ? tvmlminh
Set up server as SQL server to record SQL specific informati
Hi, I want to know how to set up a server which is running SQL to record information specific to the SQL e.g. in the MIB browser the MSSQL-MIB file -- the data located in here. I have attempted to record some data from a customer site before and have had the picture of the server showing the MSSQL label on it. but in the db data it doesnt appear to have recorded the SQL specific information such as db size, read write on db . mssqlsrvinfooutstandingreads and mssqlsrvinfooutstandingwrite as example
Monitoring uses a large amount of CPU on client
Hi, I am currently evaluation the product and have an issue with the amount of CPU usage required on the target domain controllers. Ever since we installed OpManager we have been getting frequent alarms due to the processor queue length thresholds being broken; currently set as the default of 7. Further investigation has led me to conclude that these alarms are occurring when OpManager is polling the domain controllers. OpManager seems to utilising 100% of the CPU for about 5 minutes every 15-20
Next Page