Disk space monitoring and snmp issues
I'm currently trying to figure out now to get around two rather severe problems. 1. We currently have alarms set on our diskspace monitoring to alert us at 90%, this part is working fine so far. The problem we're experiencing is that we on occasion have disks that fill up and aren't out responsibility to clean out or we may need guidance on what needs to be compressed, etc... I our current setup the monitoring system shows a list of servers over the 90% threshold and updates the amount of free space
Multi-volume Disk Utilization Graph
In the device view the disk utilization graph is great - but can we break it down by volume?
Unwanted switch port alarm's (unmanaged ports)
Hi there, I'm testing opmanager....latest version in a windows 2003 server (on VMWare ESX). I get unwanted alarms from my HP procurve 4108 switch. Stangely enough i get errors from unmanaged ports. Any idea how this is possible? Thanks in advance, Wouter
windows 2000 SNMP issue
I have one 2k server that will not tell me the free or used disk space amounts via SNMP. Anyone know what might cause this? when i test the monitor it comes back as OK. It reports the Free MB as 0 though. the drive has almost 477GB of free space. i have tried the other disk monitors and they all report 0 on that drive. Other drives report back just fine!
Hot Fix 6015 Released!
Hi All! A hot fix with build number 6015 has been released and is available for download on our website. This can applied over build 6010 or above. The features/fixes included in this hotfix are: 1. Day light savings impact handled (available only in the complete binary download and not in the ppm. Existing users need to follow the steps in the forum http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002640819). 2. Support for installing OpManager in Windows
State Changed monitor
Hi, I was wondering if OpManager has the ability to trigger alarms on state changed for switches etc? For example we have ports that are active but have nothing plugged into them. and we want it to send an alarm when something gets plugged into it. and vice versa.
OpManager 6 Hotfix download
I can't find the new hotfix link from the download page, Any one can help it? Lahav
interface selection with notification - error
hello together, Version OPManager: 6016 during the email notification I cannot select the interface, the following error message appear: No managed interfaces/ports found for this device. the interface on the server can be selected however. do I have to still activate the interface for the notification or which the problem could be? the problem exists with all servers thank you for the answer. greets, Rico
Url Monitoring on port 8080 not working
Hi, i recently had to use the url monitor in opmanger to monitor site urls that were hosted in jboss and listening in port 8080. I am getting an error "The URL http://XX.XX.XX.XX:8080 is down, Reason : Connection time out". PS:- The ip has been masked for security reasons. The url monitor workd fine with the websites hosted in apache listening at port 80 on the same server. I think its because of the change in the port that the monitoring is failing. Can anyone help me get around this issue. Thanks
transfer to another system
Hi , I've trialed this software on my laptop and if we go ahead and purchase I'd be looking to transfer it to a server. Is it possible to transfer the database i.e all the approved devices in rogue detection etc, to another system or will I have to start from scratch again on a new machine?
Hardware Inventory = null
When viewing a server, for example, I click on the "Hardware Inventory" link on the right in the "Device Info" box and it comes up as "null". Does anyone have troubleshooting tips regarding this matter? FYI AdventNet - When using the "Windows Users List" and "Windows Groups List" in IE7, the frame that surrounds the tree-list does not automatically grow shrink when the trees are expanded and collapsed, which always hides the very information one is after. It works fine in Firefox. Thanks In Advance
Event Monitoring missing most events!
Hi There, I have had op manager running for about a month now, monitoring six servers. So far i really like the product, but i'm getting really inconsistant results monitoring the windows event logs. Essentially opmanager just seems to MISS a lot of the errors or warnings in the application log and system logs on the servers it's monitoring. I have gone over the configuration, in case i had made a rookie mistake, but everything is set up correctly. In my specific case, i have it configured to watch
Help with error message
Hi, Does anyone know why i keep getting the following message on my Cisco 3560 switches? AuthenticationFailure : .1.3.6.1.4.1.9.2.1.5.0: null .1.3.6.1.4.1.9.1.617 c42_4 Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(35)SE1, RELEASE SOFTWARE (fc1) Cop thanks, Matt.
Reports show multiple entries for same device
Hi, We have 80+ servers defined in OPManager. When I look at the devices, it shows all of the servers - each one time. When running a report, it may show the same device multiple times. For example, in CPU Utilization, server 509 shows two entries: Min Max Avg 509 1% 97% 52% 509 1% 77% 2% This may be a "canned" report or a custom report. Most of the time, the averages are a couple of points apart, but sometimes it is like the example above. What am I missing? Thanks,
OpManager 7 Beta - Released
Hi All, After several months of hard work, we are happy to bring you OpManager 7 Beta - A brand new OpManager ! For version 7 we focused on making the product simpler to use & easier to configure. We have got loads of new features and a new enhanced user-interface and we hope you like it. Take a look at the demo here and download you free trial here Existing customers - Try the 7 Beta on a separate machine. We are working on the migration pack that will be released along with the public release of
Maintaining Database
any guide to maintaining the op manager database? is it possible that when the database gets too full the software will hang. the op manager im using seems to be having that problem. it will hang after a period of time(weeks or months), im using it in the office to monitor the network. the concern maybe that the database is too full and the software hangs. sorry if its absurd or way off.
Adding WMI SQL Monitor - 800706d5 - The security context is.
Everytime I try and add the monitor to the SQL server the error (800706d5 - The security context is invalid) pops up on the page. Any ideas on a quick fix or where this is stemming from? Thanks.
64-BIT Linux Support?
Is there a timeframe to provide support for a 64-bit Linux version?
MIB for 3Com 7750 and 4500
Hi, I am looking for 3Com 7750 and 4500 MIB's. JMK falkon@hispeed.ch
OpManager 7 -- Issues in Gentoo
There is a problem with having interfaces be generated multiple times, ending in a sort of memory overflow as the machine running the OpManager 7 server runs out of RAM and crashes. This has been reproduced in Gentoo Linux, and after spending about 4 hours on the problem, it has been determined by OpManager's development staff that the problem is with Java not properly syncing its timezone with Gentoo. So, Gentoo users, fear not! I'm going to attempt to patch together some scripts to make OpManager
error op7 during installation
I install op7 on RH9 and Installing ManageEngine OpManager 7. Please wait... |-----------|-----------|-----------|------------| 0% 25% 50% 75% 100% ||||||||||||||| Extracting Files. This will take few minutes. Please wait... Localizing the product... java.io.FileNotFoundException: /op/OpManager/conf/opmanager_webserverport_replac eInfo.xml (No such file or directory) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.<init>(Unknown Source) at java.io.FileInputStream.<init>(Unknown
Import 6 config/db's to 7?
We're currently evaluating the 6 version of the software, and have configured all our network devices, etc. Is there anyway to export this information from the previous version of the software to the new one? To evaluate the beta, I would rather not have to re-invent the wheel. Can you offer a 'how to' for this migration? Thanks! Joanne
Feedback on OPManager
Hello, Thanks for the great job did with this new version more easy. WMI - I got an issue with WMI credentials, I have set domain\username, this one have Domain admin rights and it is in Local Admin group on servers but I got access denied or I cannot get correct WMI monitor. I monitor these devices with OP Manger 6 without issue. ADD Device, for HP server (ex compaq), vendor becomes microsoft and when I add more monitors (performance), counter in the snapshot stop to work (CPU etc) REPORT, URL report
Searching a device howto?
Good Day, We are a small romanian company and we are testing your software OpManager on a linux machine. We consider that it is a great monitoring software with many facilities and it's mapping for our network. In this moment we are monitoring cca 500 equipments from wireless, routers and switches categories. Everything is ok without a big problem: How we can find a device knowing just a part from it's name? Far so now we see it works finding device by typing ip address or by typing the words (in
Problem with Custom Reports
Hello I'm evaluating OpManager 6.0 and i really like it. I found the following strange thing : When i go to the Device Details of a Switch i can click on Traffic Monitor - Interface Rx Utilization and i see the Interface Utilization for each Port. I see the traffic for today, for the last 7 days or for the last 30 days. When i go to custom report i use the same Switch and select Interface Rx Utilization and as start time today 09:00 till 11:00 but i receive the error : Data not available. I tried
TFTP Server Tool Included
Dear All, We are pleased to inform you that the latest update to OpUtils, build 4303, includes the TFTP Server tool. The TFTP Server has the following abilities: 1. Download the startup and running config files from the Cisco devices. 2. View the downloaded config files. 3. Change the TFTP Root directory. 4. Edit the downloaded config files. 5. Upload the config files back to the devices.Refer to http://manageengine.adventnet.com/products/oputils/service-packs.html for details and download instructions
network monitoring question
Does Oputils 4 have the ability to present a current overall view of my cisco network and can it email if a service goes down? Vern Pruden
OPMANAGER7 snmp community err
HI. I Installed Opmanager7. I configure Netscreen208(community name is secure). I add device succesufly. Problem is below. session, cpu, memory status shows correct. Interface status is not gethered. I think problem is related with community name. I captured data with tcpdump. session, cpu, memory query = secure interface query = public How do I correct problem.
OpManager Ver 7
Any news when version 7 will be available? Thanks
OpUtils now supports Windows Vista
Dear All, Support for running OpUtils in Windows Vista has been included in our latest update. Refer to http://manageengine.adventnet.com/products/oputils/service-packs.html for details and download instructions to upgrade to the latest version. Thanks & regards, Ananth
Exchange 2007
Has anyone used Opmanager MSP to monitor a exchange 2007 environment? If so what works and what doesn't? Are there any plans to full support ex2007 in newer versions?
Linux Service setup
I found a post a while ago that had instructions for setting up Opmanager to run as a service, but can not find that post anymore. Can this be reposted and maybe set as a sticky?
OpManager MSP
Hi, How can I change the IP Central settings. I've configured a ip:port address to access from the Internet while installing the Central and now I don't now how to change it without having to reinstall. thank you
local AuthenticationFailure
Hi, does anyone knows why the following error occurs on several servers in our network? local AuthenticationFailure : .1.3.6.1.4.1.311.1.1.3.1.2 TEDI-SRVBB Hardware: x86 Family 15 Model 3 Stepping 4 AT/AT COMPATIBLE - Software: Windows Version 5.2 How can i solve this error or turn the error message in opmanager of?
Suspend an alert for a soecified period of time
I run the MSP version and would like to suspend an alert for a specified period of time. As an example, I might notify a client that space on Drive C has exceeded the threshold. They then may take a day or so to fix the problem. I would like to suspend Drive C errors for a specified time say 24 hours so it does not continue to generate alarms, and so that the alarm screen is not cluttered. Is there a way to do this? If not maybe in a future release?
Maintenance plan
Hai, After installing to version 6003 i'am missing the maintenance interval ? Michael
Citrix Metaframe MIB problem
Hello , I have a problem uploading metaframe.mib to monitor my citrix servers with Op Manager. In the attachment you would see the parsing error on the metaframe.mib file. I took the MIB file from Citrix Presentation Server 4 CD. Unfortunately Citrix Support only HP NNM, Unicenter TNG and IBM Tivolli. Does somebody has an idea how to correct this problem? Thank you
error of Database connections disconnected
Hi there, I just installed and start the OpManager, When I started OpManager, which can't connect a database. And then I tried to disable SELinux and link libdb-3.2.so to libdb-4.2.so, still can't start up a client side. however how can i solve that problem and would be paste those error message in there. [root@localhost bin]# ./StartOpManagerServer.sh inside addon check This OpManager has been licensed to Evaluation User. Starting AdventNet ManageEngine Server Modules, please wait Process : StartTelnetClient
Setting Up SNMP
how do i set up SNMP on linux?
how to take backup for opmanager trail version
Dear Support Team, Crrrently we are using OpManager trial version .Today is the last day for running application. So we need to take back up for OpManager database. Please give the quick reply . Thanks and Regards. vijendar B.
Next Page