Anonymous access to a map?
Hi, Is there a possibility to get anoymous access to a map? I want to link to a map from another application. Thanks Martin
Poor install instructions
I'm trying to get a copy of this installed and running to test it against Nagios (which i've got working) But i must say your install instructions are very poor! here is what the install instructions say on your website and in red is my comments:- Now, to install OpManager on Linux machines, follow the steps given below: Download OpManager for Linux . - Done and in /src Login as root user. - Already Root Assign the executable permission to the downloaded file using the following command: chmod a+x
custom monitor - memory usage
Hi again, I have created a custom template for a Trapeze Networks wireless switch, but can't get memory usage to work. Basically the device responds to: .1.3.6.1.4.1.14525.4.8.1.1.1 - memory (bytes) in use .1.3.6.1.4.1.14525.4.8.1.1.2 - memory (bytes) available in total I have tried to create a Custom Monitor in Bulk mode (where you can manually type the OID) using the following syntax: (.1.3.6.1.4.1.14525.4.8.1.1.1)/(.1.3.6.1.4.1.14525.4.8.1.1.2)*100 ((.1.3.6.1.4.1.14525.4.8.1.1.1)/(.1.3.6.1.4.1.14525.4.8.1.1.2))*100
NetGear GS724T snmp problem
Hi, I have two NetGear GS724T switches and I'm trying to monitor them using SNMP. I created the setup and OpManager is connection to the SNMP server on Switches. I will like to monitor stuff line CPU utilization, Memory etc using the fancy graphs like it's done with the others. Can I do it and then share it with the orders by myself? I know a little bit about the programming and networking. I know that I can monitor specific MIB paths using OpManager, but I never heard about the graphs situation.
squid monitoring
Hi, we need monitoring several squid proxy. It's possible use squid SNMP into OpManager ? someone have just done this ? Thanks
Monitoring large amt of disk space
We have a 12 Terabyte Drive. I set up an alarm to notify us if the avail drive space is less than 3600G. After doing this, we get an alarm that we are at 100% Disk utilization and that there is -3600G of space left even though there is 95% drive space available.. Please advise
Problem Uploading MIB
Hello, I am trying to upload a MIB to manage a Nokia IP330. When I try to parse it, I get the following error: Error parsing MIB:NOKIA-IPSO-SYSTEM-MIB.txt Exception while loading MIB:Could not parse the file D:/OpManager/./mibs/NOKIA-IPSO-SYSTEM-MIB.txt Couldn't resolve these TC constructs : { Integer } I have attached the mib in question to this post. Thanks! Mark
Custom monitor
Hi there, I am using OpManager 7021. Quick question, how do you delete Custom Monitors? I see in Admin > Custom Monitors you can display the list of ones you've created, but there's nowhere to delete them (that I can find)? Regards, Lee
OM6 availability Reports in OM7
Any one know how I can get the Opman 6 availability reports based on business views out of Opman 7? I have to produce management stats for our servers and it was very easy in 6 but I have made a big mistake in upgrading to 7 only to find the reporting is useless and a major step back. If someone has the query that was run in 6 then I'm sure I would be able to get something worth while out. Failing this I could drop the Opman product and go back to gfi or start again from 6 (which will take ages to
Customize homepage
Hi, Is there no possbility to customize the homepage from the opmanager? f.e. Is it possibile to show more then 10 snapshots? Thanks in advance Martin
Reinstall problem
Hi, I recently change my client server and install MSP but he didn't want to start. When reinstalling, I supply the 0470_key.zip from the central admin I want to re-use the same ID on the new server. When I try to start it, I got this message: INFO | jvm 1 | 2008/01/03 11:47:20 | License check successful INFO | jvm 1 | 2008/01/03 11:47:20 | DMS with ID " 0470" already exists. INFO | jvm 1 | 2008/01/03 11:47:20 | Please reconfigure the DMS ID in the NOCServerDetails.xml and start the DMS. INFO | jvm
OP Manager 7 and Flash Player
We recently upgraded to version 7 and noticed that at least one area requires an upgraded Flash Player (on the Home page, the Business view 'add' tool). Our server does not connect to the Internet, and Adobe does not allow downloading of an installation executable file. They insist on intalling directly to the running browser, so we cannot get the Flash Player onto the Server without a live Internet connection. For security reasons this server is not permitted to connect to the Internet. Is there
add device on command line
Hi, i have 1700 x /24 subnets each containing a dozen systems, and i need to add the .1 address (the sites router) only into opmanager... how can i do this without hiring a temp? i saw reference to an add-interface.zip but the links listed on this site now 404... Thanks Chris
Question
Was wondering if OpManager MSP's was as robust as ServiceDesk Plus 7 with OpManager add-on
SNMP Problem with some Alcatel swichtes
Hi, Unfortunaltey we can't connecto to some Alcatel switches. It's not a problem with the mibs. We can't connect via the mib browser. There is also no connections with an alternate mib browser possibile, although from a second server, with the same browser, we can connect. There is no ip access list or firewall active. What could this be? Thanks in advance Martin
reports
i am unable to server monitoring report paul
Creating Flexiable Monitoring Rules based on timing interval
Dear All, I am currently Evaluating OPmanager and I can say so far that it is one of the powerful tools for integrated Monitoring for network and system platforms. However, I am trying to implement a custom rule to monitor a service in one of my server. The issue is that this service is schedule to start at 5:00 am every morning and to stop at 7:00 pm. This service is running according to this schedule 5 days a week. I was trying to create a rule to monitor this service but I could not define the
As i can remove a custom monitor?
As i can remove a custom monitor :?:
Monitoring Remote Machine
Hi, Im starting using OpManager and I wanto monitor local and remote machines. The remote machines aren�t over a VPN or directly conection, I like to now how to do this, wich ports a need open and if i can use all features for remote hosts, like AD, MSSQL and Exchange monitoring. Regards Milani
msp new release
When is the update for 4th querter for MSP edition due out?
file manage
is there a way to get the system resolve the DNS name for a switch? would help under the archive options eric huffman
Creating Flexiable Monitoring Rules based on timing interval
Dear All, I am currently Evaluating OPmanager and I can say so far that it is one of the powerful tools for integrated Monitoring for network and system platforms. However, I am trying to implement a custom rule to monitor a service in one of my server. The issue is that this service is schedule to start at 5:00 am every morning and to stop at 7:00 pm. This service is running according to this schedule 5 days a week. I was trying to create a rule to monitor this service but I could not define the
Log a Ticket when Treshold violated
Dear All I have created a Noficication Profile to log a tikcet with service desk when the service is failed or device has missed atleast 3 polls. I have not selected the below options. 1. Threshold rule is violated** 2. when the alarm is cleared But still OP Manager logs a ticket with service desk if the threshold is violated or alarm is cleared kinldy advise.
MS SQL Backend - AD Authentication
Hello, all! I am currently using OpManager 7 on a Windows XP SP2 Pro machine to monitor my network. Recently, I've purchased a web server so that I could consolidate a few of our internal web services. The current configuration is running using all of the installer's defaults (MySQL database, etc). I would like to do 2 things: 1. Set up a new installation of OpManager on this new server. I would like to use it with an MS SQL database backend. 2. Port my configuration and data from the MySQL server
Clear SNMP Trap Alarms
Hi all, I'm currently evaluating OpManager ... and so far I really like it. But there's one thing that would really make things much easier: Our firewalls are sending OpManager SNMP traps when a VPN tunnel goes down - so far this is working without problems. We're receiving these traps with the "Specific type" 3000 (the firewall uses this field to send its event ID) and a critical alarm is being generated. The firewalls are also sending a trap when the VPN tunnel is up again (type 3002). Now when
Monitoring Disk Queue Length
Hi We are using OpManager MSP build 6005. How can I measure Disk Queue Length, for a Windows 2003 server. Do I create a custom monitor?
Device Discovery
Hi there, I want to monitor 1 ADSL router, I can add the device in and it monitors fine, but what happens OpManager will do a netowrk discovery after x amount of days, and it will discover all the network devices onthe same subnet as the ADSL router. Is there any way of adding just the one device without OpManager add every other device on the same subnet. thanks
Server Reports - "Data not available"
I am having an issue recently which seems to be affecting either the gathering of data or the presenting of the data gathered. When I run a Server Health Report, I get Rx Traffic Util, Tx Traffic Util, and I can run an Availability Report, but I do not get any data presented for CPU Utilization, Memory Utilization, or Disk utilization, I get "No data available". This also appears to be true when I go to the individual Servers as well. However the current data and the last weeks data in some circumstances
How to see array windows fails??
Hello, first of all apologize for my English. As I know if a disk fails in a settlement
Upgrade to Opmanager 7 error
Exception in thread "Thread-15" java.lang.NoClassDefFoundError: com/trend/iwss/jscan/runtime/CallContext at com.adventnet.me.opmanager.operations.server.OpmPreInvocation.loadPath(OpmPreInvocation.java:389) at com.adventnet.me.opmanager.operations.server.OpmPreInvocation.<init>(OpmPreInvocation.java:34) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown
Custom monitors - Lookup values
Hi there, Does anyone know if there is a way to create custom monitors for device templates that use a lookup table for statuses rather than just returning the value sent from the device? For example, we monitor the duplex and speed on our server nics in order to recognise possible network problems but the values returned are from 0 to 4 which translate to disconnected, half duplex, full duplex and fault. Is there a way to provide these text values so that these are shown instead of the raw value?
how to add a centos 4.5 server
Hello, I use OpManager7 and I want add an agent what system is centos 4.5. Is there anything I can do? Regards, Manuel
Notifications for SMTP Service Failure
I Have OP Manager MSP Edition Build 6005. I get Notifications for all type of failures but if its a SMTP Service failure I dont get the Notifications. Proper Notification Proile is associated to the server and also SMTP Server to send email notification is different to the server which is failing and getting monitored.
Is it possible to run a report of the Alarms?
Hello, Would it be possible to run a report of the Alarms? Thanks, Manuel
Monitor Disk Queue Length
Looking for a way in Opmanager to monitor and add a threshold to the Disk Queue Length metric on Windows Servers
get a long output message which with a pause by cli api
hi: When i send a command by telnetsession api ,but the output message is too long and it has a pause,so i can't get output message.In other words, how can i get the output message when I send "ls | more" in linux by telnet session api. see below TelnetSession session = new TelnetSession(); session.connect( localhost, 23 ); session.setPrompt("$"); session.setLoginPrompt("login:"); session.setPasswdPrompt("Password:"); session.login( loginname, password ); String respond=session.send("ls | more"+"\r");
Device Monitoring Issue
I'm trying to monitor a variety of devices and with most of them, the Today's Availability box will either show Down (red) or Not Monitored (blue). There are no alarms, says the device is functioning properly and the Response Time is displayed as well. I know I have something configured wrong but need some help in discovery why. Thanks, Alex
Problem with delete Switch Ports
Hello Support Team we use the OpMgr. MSP Ed. and have the following Problem. When we want delete a Switch Port that should not be monitored, than we become the following error Message: "Unable to delete the interfaces." Sometime it works fine, sometime not. What is the Problem? Thank's for assistant Daniel (Ticket Nr. 12268)
Unable to add checks on some printers
Hello, I use OpManager MSF. One of our client owns 4 printers. OpManager sees the 4 printers and shows the blue star. But on two of it, as soon as I try to add a ressouce here, the next screen is displayed : [URL=http://imageshack.us][/URL] What can I do ? Best regards
Delete or edit Custom Monitor
I created a new device template. I added a custom monitor to it. Now I want to change the custom monitor. How do I edit or delete it? Thanks.
Next Page