Only the first MAC address from switch port mapper per port shows up in IP address area manager.
Hard to explain, but if I have multiple ip address's/mac address's connected to a single port on a switch (because the other end has a dumb switch, is a virtual server, etc), only the he first ip/mac listed in the switch port mapper section (the rest are listed when you click "more') will have that corresponding port listed in the ip address manager section. Does that make sense? Please advise.
ifspeed change alerting
I'm evaluating OpUtils at the moment and I have a question concerning the interface speed. We had some problems with the cabling in the past. The result of these problems was a change of the interface speed from 1Gbps to 100Mbps. At the moment nobody notices such a change until a problem occurs. Is there a possibility to generate an alert with OpUtils if a specified interface changes the speed? It is not necessary to generate this alert immediately. An alert after a scheduled rescan (every hour)
How to install & run OpUtils in Cent OS?
Unlike other unix based operating systems like Redhat, Fedora, Ubuntu, etc., Cent OS need some specific changes during installation. The steps below will guide you in getting OpUtils installed on a Cent OS: Download the Linux installable from our website and run the installation. The installation can run either as a normal user or a root user. After the installation, login as a root user and execute the command: export PATH=/usr/sbin:$PATH Now, run the installFirebird.sh located under <Install_Dir>/ManageEngine/OpUtils/bin
This ZOHO Forum is ridiculous
I simply want to be able to select a single product (Oputils for instance) - Have a single click to get me to that forum - and be able to see what is posted there.....This format is absolutely ridiculous - there is no way to navigate it without complete and utter frustration setting in...
Two SNMP Management Software on same server
Hi... Will Oputils work on the same server that I have another SNMP Management software running on?
Error when trying to scan subnets
If I right click on a a subnet under IP Address Manager, I get an error. Its a popup window that says "An error has occured", without any information next to tool name, message, root cause. If I click to create support file, the hour glass goes forever. Also noticed in the logs that the same device gets added and removed everyday.
Maximum configurable subnets on IP Manager OpUtils
hi, What is the maximum number of subnets that can be configured on OpUtils IP Manager. Thanks Martin
Maximum configurable subnets on OpUtils IP manager
hi, What is the Maximum configurable subnets on OpUtils IP manager ? Thanks Martin
Korea is interested in IP Management.
Dear all, Korea is interested in IP Management such as blocking the IP or MAC Address. Can you plan the support in the future?
IP phone switch port number
Hi all, I m looking for a tool to help track IP phones movement in the LAN. Can OpUtils do that? I just want smthg that tells me "this phone was on this port in this switch, now it is on this switch and this port". I hope my question is clear enough. Thank you in advance
How to add specific OID to subnet
Need help, how to add specific OID to the scan result on IPAM
Upgrade pack for 58000?
A question to the oputils team: Is there a chance that we'll see an upgrade pack for the new version soon? Somehow I feel a little neglected, seeing that that new version is out quite a few days, and we, the long-time users, have to wait. Regards GWeiss
How to Set Up SNMP on a Windows 2003 Server for DHCP Scope Monitoring
Can anybody provide insight as to how to get this working? I have the SNMP service started and the oputils server is listed in the security tab with the appropriate read only community name. When I try to add the DHCP server in oputils, I get this error: "E2001: No response to SNMP queries" Does the SNMP trap service ont he windows server need to be configure as well? Any documentation or advice you can provide will be helpful. Thank you in advance.
Firebird Won't Start
After a new download of version 5.7 of oputils, I keep getting the error message that firebird won't start. Any suggestions? Thank you.
Problem with Bandwidth Monitor - OpUitls Build #58000 - Instalation of Last Download Available
OpUitls Build #58000 - Instalation of Last Download Available I installed the last download available in the site www.adventnet.com, and i configured interface in the tool Bandwidth Monitor, and the OpUtils don´t read information of my switch, and it create copies of the interface configured.
Can't select from list for Wake On Lan in OpUtils 5
I have the trial version of OpUtils 5 and want to add a list of PCs to a WoL schedule. I get the pop up box and click on the PCs I want and then click OK but the PCs never show up in the rule I'm creating. Do I need the full version to add the PCs from a list? I can add the PCs manually, but was hoping to test how easy it was to do a mass WoL setup.
Security vulns in OpUtils
Hi, I recently saw 2 reports for exploits in oputils: http://packetstormsecurity.org/1002-exploits/oputils_5-sql.txt http://packetstormsecurity.org/1002-exploits/oputils_5-xss.txt Is it true?
Monitor Virtual VMWare Switches?
I am currently using the trial of OpUtils. I am working on mapping our network switches. I've noticed that my VMWare machines always come up with their parent switch as unknown. Since this is a virtual switch - is there a way for me to have OpUtils talk to VMWare and get the switch/port information in this way? Thanks. Dave Mackey.
Bandwidth Monitor - More granular?
Is there a setting somewhere in the bandwidth monitor that will allow one to see the sites comprising the web traffice? For example seeing if a user is streaming espn or using utube all day. Thanks.
Possibility to import Owners from AD or CSV
It should be possible to regularly scan the AD for Owners and scan the desktops for the last logged in user like in SDP or AssetExplorer.
OpUtils 5.6 Released
Dear All, We are pleased to announce the release of OpUtils 5.6. The key features and enhancements of this release include: IP Address Manager 1. Create a hierarchical representation of your network - locate your subnets easily 2. Create groups to denote the location or usage and add subnets under them 3. Drag-n-Drop subnets from one group to another 4. Scan all the subnets in a group 5. Seamless integration with Windows Active Directory to get the device details. Rogue Detection 1. Automatically
Bandwidth Monitroing from virutal machines. Virtual machines are not shwoing in the Summary view
Hi there, I am already in the test process for EventLog Analyzer, we have created the test enviroment in which we have two physical hardware machines PC1 and PC2 (Running XP SP2) on PC2 I have installed the EventLog Analyzer and on PC1 I have made two virtual machines VM1 and VM1 bother are running Windows 2003 server. I wanted to get the details about the bandwidth utilization collecting events from these virtual machine for that I have downloaded the OpUtils. I have installed it on PC2 and
New year wishes..
Hi Folks, ManageEngine OpUtils wishes everyone a Happy New Year 2010. **************************************** J Dinesh Babu Sr. Technical Consultant IP Address & Switch Port Management Software Tel : +1 925 965 9362 Email : oputils-support@manageengine.com Website : http://www.oputils.com/ Forum | Twitter | KB****************************************
Wishes from ManageEngine OpUtils.
Hi Folks, Christmas wishes to all. Merry Christmas and Happy Holidays. Thanks and regards, **************************************** J Dinesh Babu Sr. Technical Consultant IP Address & Switch Port Management Software Tel : +1 925 965 9362 Email : oputils-support@manageengine.com Website : http://www.oputils.com/ Forum | Twitter | KB ****************************************
Config File Manger
I am having issues with pulling down the configs off my cisco routers. I have the config-copy and config snmp set on the router. I can see the tftp server accessing the device and the file but it still pulls down nothing. Any information would be greatly appreciated.
An Error Occured
I have downloaded the latest version OpUtils 5.6 and installed it, but failed to get it started: If I try to Add a router, I always get " An error occured" If I try to Add a subnet, I also get the same error: " An Error Occured", and I have emailed the diagnostic log to the support address offered by the error handler. Do I need to do certaing preparations, prerequisite befor installing/running OpUtils.
Database update
Hello my PC crashed and I didn't have the latest version of oputils running. I don't know what version I had, but I installed the latest, 5.7. When I put my database file in the c:\program files\ManageEngine\Oputils\firebird directory, the program didn't like it. How can I update my database file to get this to work? I tried multiple times to contact oputils support for this question. When will someone call back? Mark
5617 Rogue Detection Issues
It appears that the rogue detection in latest 5617 is registering multiple insrtances of the same device.... Anyone else seeing this? . 00:16:41:ED:86:CA 10.10.25.17 aut600c01.sfccmo.edu 23 Jul 2009, 10:38 AM USI 10.0.99.17 131 00:16:41:ED:86:CA 10.10.25.17 aut600c01.sfccmo.edu 23 Jul 2009, 10:38 AM USI 10.0.99.15 642 00:16:41:ED:86:CA 10.10.25.17 aut600c01.sfccmo.edu 23 Jul 2009, 10:38 AM USI 10.0.99.20 1 00:16:41:ED:86:CA 10.10.25.17 aut600c01.sfccmo.edu 23 Jul 2009, 10:38 AM USI
Running OpManager and OpUtils on same server
Hi, I'm running OpManager and OpUtils on same server. The problem is that when I login to OpManager I get logged out from OpUtils and viceversa. How can I solve this problem?
OpUtil 5 install issues
Hello, Ive installed OpUtils5 on a linux box and am having issues trying to connect to the webserver instance. I accepted the default install port (7080), yet when I browse to http://ipaddress:7080 i get nada. (I did run the start script in OpUtils bin directory) A process table doesn't show anything that looks related to OpUtil. Not sure where to head from here. Suggestions?
Currently, OpUtils does not support localizational language (Korean) in the webclient UI.
Dear all, Currently, OpUtils does not support localizationa language in the webclient UI. Can you support it when?
Add Custom Fields for Port/IP Management.
I'd like to see us able to add custom fields to the switch port mapper and the IPAM management. That way we could annotate entries with additional information we feel is necessary. I have specific instances in mind, but what I need might not be the same as what others need - so a generic custom field like in ServiceDesk/Asset Explorer would be nice. For example, I'd like to be able to give a IP a name apart from its DNS name (if it has one). I'd also like to be able to leave comments on specific
Blocking Ports
Is it possible through OpUtils to block particular ports through a switch? I'm looking to block port 23 ( telnet ) locally. Any help is greatly appreciated! :)
Switch Port Mapper - If scan failed then always failed
Hi, I test Oputils 5.6 Build 5603 with 10 Cisco-Switche. In the Switch Port Mapper Tool sometimes break the scan on some switches with failed. All the same how often scan is repeated status remains failed. If I removes the "failed" Switches and adds it again - it functions again excellently. I use the newest Version of OpUtils. If this a bug or if there is another solution ? Many greets Kai-Uwe
How can I see multiple SNMP graphs?
I can configure SNMP graph to monitor a single OID on a single device. I would like to monitor 4 devices, and 2 OIDs per device - that's about 8 graphs. How can I create and see these 8 graphs together?
How to change from bits to kb or Mb?
Hi, Unit in program is shown in bits, how can I change to kilobits (kb) or Megabits (Mb)? It makes a lot easier to read values. And where is the option if I want to see values every 5 minutes for last month in Bandwith Monitor. I can see every 5 minutes if I choose "Last Hour Report", in "Last Month Report" is available only every 1 hour period. Thanks
Switch port mapping doesn't work with Nortel switches
I'm using the version 5.6 build 5613, but when I try to add a Nortel 325-24G switch on switch port mapping, it always failed. I set the community in my switch but is not working. It works fine with Cisco and 3Com elements. Can someone help me?
Switch Port Mapper - IP Address Manager dual entries
Hi, I am running latest build of OpUtils (5619) on Windows 2008 x32 server. All is working well, except on switch port mapper, on ports where switch is connected to switch (uplink) I see entry for a computer that is connected to that port, resulting in multiple IP entries in the IP Address Manager. Example: Computer A is connected to switch 1 on port 10, switch 1 is connected to switch 2 on port 12, switch 2 is connected to switch 3 on port 5. I see computer A on all switches in the port mapper
Path and limit of generated daily log files in OpUtils
Hi, We are using OpUtils (version 5.6 (build 5617)) and few days ago we had generated daily log file of 1.5 GB in size. Daily log files are generated on path AdventNet\ME\OpUtils\logs\localhost_log.YYYY-MM-DD.txt by default. Is there a way to change this path? Is there a way to limit size of log file? Thanks, Darko
Slow Switch Port Mapper Scan
Hallo We've installed the OpUtils Tool in our factory. So far it's working great an we get all informations which we looking for. At the moment, we've got 112 Cisco devices an around 3300 switchports to scan. The hole system runs on a virtual VMWare ESX server, with Windows Server 2003, 3 GHz processor and 512 MB memory. When i click scan all devices is takes around two hours to scan them. Isn't this a little bit to long? Greetings from Switzerland Patrick
Next Page