Forget the Admin Password
Hi , I forget the password for Admin account , can you please send the reset procedure for the same . Thanks Shekhar
Network Monitor tool lose the Monitor after logoff
hi All, I noticed that when we logoff of the web page, all devices that was added on the Network Monitor Tool disappear, so I need to add again them. Is this right? Shouldn't them be saved? Regards SUz
password reset
I lost the password and username for my login. I then did the following: 1. I only have a few combinations so tried these- none are working. 2. Tried to uninstall and reinstall the program. a. The program will not uninstall completely. It always leaves registry keys and folders under C:\program files\advent. b. Even when I do manually delete these and reinstall I still cannot log in with default admin admin settings for user and password. How can I get the password for now? How do we completely uninstall
conf files for SNMP management agent for a Sun Fire V240
Hello everybody, I am trying since few good long days to set up the SNMP agent configuration in order to have system information about disks, memory, CPU using an SNMP (SEA) trap receiver. Can somebody send me a working configuration (the files set-up) of Sun SNMP management agent for a Sun Fire V240 machine? I installed the bundle �SUNWmasf.<ver>.tar.Z�, I followed the doc �Sun SNMP Management Agent 817-2559-13� but there is no result for the moment. Thanks anyone who can bring me some light. aurekius
Regarding OIDs
Hi all, i am new to this SNMP field I went through it and I am need of OIDs for x86 Family 15 Model 2 Stepping 9 AT/AT COMPATIBLE - Software: Windows 2000 Version 5.0 (Build 2195 Uniprocessor Free),for windows machinw can any one please send me the available OIDs to get memory,CPU,Disk Utilization. Thanks Nagaraju M B
E2002: Specified OID is not implemented.
hello, i have installed a trail version of ManageEngine OpUtils 3 on PC and start snmp service on other PC run windows 2000 pro sp4 , i want to monitor the cpu usage of that node , but when i enter the ip address and press "show" , an error : E2002: Specified OID is not implemented. how can i make it ??? thanks!
Incorrect OS
Hey-- congratulations on OpUtils, an excellent tool suite. You Indian programmers rock, I must admit. One small problem-- my XP machines show up as Windows 2000 in the System Snapshot. Are you aware of this? -- BF
HP Laserjet MIB
Tyring to load a MIB into the tool but it errors telling me that it can't Parse the MIB. I'll attach it here with a .txt extension. I would like to simply be able to use SNMP to see the device status.
Alerts!
Can we use the manageengine to send alerts to mobile or email the alerts if something goes wrong with the server like server is running out of space or some device is not responding. I am trialing the software as I downloaded it today.
Does not work at all
Hi, I really like to evaluate this product since we have only cisco switches and routers and it seems to be great. But nothing works. Event if I do a ping, it prints this: R�ponse de 127.0.0.1�: octets=20 temps<10 ms TTL=128 Statistiques Ping pour 127.0.0.1: Paquets�: envoy�s = 1, re�us = 1, perdus = 0 (perte 0%), Dur�e approximative des boucles en millisecondes�: minimum = 0ms, maximum = 0ms, moyenne = 0ms But the icon say: "System is not alive" ou "System doesn't exist". And when I try to do anything
community string
hiya, please can u tell me where to find the community string?
MAC IP List with multiple subnets
Hi, I define in Global Environment 2 subnets for scheduled scans. But in the MAC IP List I can only find records for one subnet. Any Hints? wkr, bc
IP range scanning
Hello, If I put in global setting following network 141.29.115.32, 255.255.255.240 OpUtils are always scanning IPs in a range 141.29.115.1-141.29.115.15. How should I solve this?
An Instance of AdventNetManageEngine OpUtils already running
Hello, I installed Oputils to evaluate the software. I ran it for about 30 min. When I turned the computer back on. It would not display any screens in the browser; the browser just displayed Internet Explorer's "Page cannot be displayed" page. To make a long story short. I UNINSTALLED IT AND REINSTALLED IT. Now it wont run at all. All I get is a java dialog box that say's, "An Instance of AdventNetManageEngine OpUtils is already running". The service is not running (It won't start because "An Instance
Discovering the IP address of a router
We have D-Link AirPlus Xtreme G wireless router and it was partially configured by a colleague here in my office. I've been asked to add security to the thing but can't access the device's admin dashboard (because he changed the IP address . . .). I'd prefer not to reset the thing if I can avoid it. I have the MAC ID but OpUtils seems unable to resolve it. Any ideas? Thanks GPC
can I use this tool to monitor the disk space of the network
I am able to use this tool for network monitoring. But what I specifically need in the report is available space, user space etc... CanI get this my using this tool... Please update me on this
v3 traps with OpUtils
Is there a way to configure the Trap Receiver for v3 Traps? Currently I only see traps sent over if they are sent as v1.
unknown wireless connection
Just downloaded your program to try and find out where my computer is connecting to. Low wireless connection to someone else's router. I looked in my system and found two unknown MAC IP addresses...how do I use this program to trace these? It's probably a neighbor who has the same Linksys wireless router I just installed on my system. I would love to locate the source and let them know how they can secure their router better. No big deal really, I can disable it on my end, but it's a mystery to me
problems with the OPUTILS
This is the situation: the error took it of the log files: 19:56:24:961 [ Cisco Input Details ][ cisco_input_action ] [ WARNING ] : InputUtil : verifyInput(String,String,int,int) : Input to CISCO devices from input detail page failed. Error Message : E1001: Unknown host - 172.30.26.1 19:56:24:961 [ Cisco Input Details ][ cisco_input_action ] [ WARNING ] : InputUtil : getErrorMessage() : Error Message : E1001: Unknown host - 172.30.26.1 19:56:24:961 [ Cisco Input Details ][ cisco_input_action ] [
logs from scheduleds scans
Hello, If we set scheduled scans in Global Environment can we read the logs per day what was scanned? if yes where are the logs. tnx.
Service Desk plus
why is that tickets that I have worked on and closed still come up upon next login as a open request?!!!!
can�t config global settings
hello, i can login but i can�t config global settings. when i try to config my router, it puts: "E1001: Unknown host - 192.168.1.1" error. and i have try to ping this node and it is up. then i can�t use any tool can anybody help me? thanks
possible upgrade
hello, we recently (June) purchase OpUtils v3.1.4. Can we upgrade to v3.2 or we have to purchase this version? tnx
IP Management
Love the IP Management module, however, does anyone know of any settings to ensure I cover the folks who aren't logged in but have a valid IP address if there's such a thing? Thanks, Jim
ManageEngine OpUtils 3.2.0
Dear All, We are pleased to announce the general availability of ManageEngine OpUtils 3.2.0. The key features and enhancements of this release include: 1. Port Scanner - A new tool to scan the tcp ports of a given device - Ability to scan multiple ports - Options to mark known services and ports 2. Switch Port Mapper Enhancements - Ability to add multiple switch inputs - Retrieves VLAN IDs of Cisco Switches and appends with the community string internally - Ability to schedule the tool to run at
Can't Login
i've installed OpUtils v3.0. before that, i have installed Java SDK 1.4.2. i can start the OpUtils server. and if i go to http://localhost:7080, i can view the login page. but after i press login, nothing happens.... please help me. need advise :)
Number of Plots
It's possible to extend the maximum number of plots in a graph? Thank you os: winxp db: firebird appl: Oputils3
Application monitoring
I need to know application usage and response on outsite workstations Does anyone know of any tools that can do this
SwitchPortMapper not showing IP and DNS name
I've been evaluating your ManageEngine Oputils3 v. 3.1.4. I'm interested in the Switch Port Mapper. I've tested it using one of our 3Com switches. The first time i did a Switch Port Mapper on the switch (did not key in the router IP) i'm able to see IP addresses and DNS names of the hosts connected to the switch. But when i tried it again after a few hours, its not showing the IP address and DNS names anymore. It only shows the MAC address. Is there anyway i can force it to take the IP and DNS names
How do i make a NoN-SNMP active
I have download a trail version of oputil3 and i have made all the machine on my network active on SNMP but the will not gather infomation how do i get the non-SNMP Active Please Help :(
SNMP service...Reg
Is SNMP service necessarily be installed on all the pc's to use this ManageEngine ?
Login Name
Can i get the information of who is the user logged on currently.
Changing OpUtils Web Port
Dear, Hi, I'have installed OpUtils3 in my PC under Linux (RedHat AS3). There is something I want ask to you. Can I change the web port of OpUtils from 7080 to another port? If we can change it, what is the filename I had to change? Thank You Regard, Stevanus
BRIDGE-MIB Problems with Switch Port Mapper
Hi I have loaded the BRIDGE-MIB and when I do "get" from the MIB Browser I get a connection to the switch (Cisco Catalyst 4006-SW). However when I try and use the Switch Port Matter I get the following error message: "Data not available. BRIDGE-MIB might not be implemented in this device." I am keen to get the switch port mapper working for some work on our network. Any assistance you can provide would be greatly appreciated. Many thanks Richard Stent Network Administrator
Switch Port Mapper - Error
Hello, When I try to use this tool I receive: [Exception in:/networks/switchPortMapper.jsp] null I use trial 3.1.4 build 3140 It happens on connection to Cisco 3550. When I put bad community string I receive proper warning. Please help, cause I consider buying this software for my LAN. Regards, Radek
IP Address management for non SNMP nodes
I'm looking for a product to manage around 10,000 active IP addresses. Although OpManager looks good I can't see how to add non SNMP devices to the subnet, is it possible? Thanks
Unable to scan certain subnets
I am testing out OpUtils build 3140. When using the IP Address Manager I am unable to scan a subnet of 10.11.183.32 (mask = 255.255.255.224). OpUtils gives me the error �Please enter a valid subnet address not IP address.� I believe this is a valid subnet address. How can I get the software to scan this range?
Features for the upcoming release - OpUtils 3.2
The following features and enhancements are planned for the next release(3.2) of OpUtils, which is expected to be released in Mid-July, 2005. 1. Port Scanner - A new tool to scan the tcp ports of a given device - Ability to scan multiple ports - Options to mark known services and ports2. Switch Port Mapper Enhancements - Ability to add multiple switch inputs - Retrieves VLAN IDs of Cisco Switches and appends with the community string internally - Ability to schedule the tool to run at specified time.3.
WindowsXP
Does OpUtils support WindowsXP ? When this is installed on WindowsXP, is trouble caused ? Thanks, Jiro
cisco configuration
please assist how to configure the cisco router
Next Page