Bandwidth monitor doesn't display utilization correctly
Hi, In trying your product, I found that the utilization percentage is not being displayed correctly due to the fact that although the interface is a gigabit interface, it's only a true T1 connection. Is there an option where we can change the value of the interface or any other alternatives? Thanks for your help, Ken
email alerts
How can I enable an email alert to be sent when the drive space on a monitored server exceeds a certain threshold? Joe Sands
Switch port mapper doesn't stop
Hello, When I go to switch port mapper and click on Refresh, the little timer comes up on the side of the refresh button and it doesn't stop. I can leave it on, then a few hours later I will get a popup saying "There was a problem". Almost like it doesn't refresh. How can I determine if it really went and updated? Thanks Mark
Config file
Hi, I am doing an evaluation on manageengine oputils4. I can able to add a device on config file manager but I cant see the config . it shows me the icon for startup and running config. where can i get these details. Thanking you. Kind Regards Balamurugan Junior Technical Analyst Network and Communications Group IT Services University of Surrey balamurugan
Old support question
Can you please clean the database that i sent you two weeks ago and get it back to me? This is still failing every day!
Transform OpUtils to an OpManager ADD-ON
Hello, Maybe OpUtils should be transformed to a OpManager ADD-ON, because he is more util under a OpManager administration.
Brocade Silkworm "not a switch"
I am trying to port map a brocade silkworm 2800 fibre switch but when I run switch port mapper Oputils returns that the device is not a switch. OpManager also only returns the managment interfaces and not the fabric connections? Please help Mark
SNMP Monitoring not working in Linux
Hi, I have configured snmp in windows machines and its working fine, but I dono how SNMP has to be configured in Linux to monitor CPU, Memory and Disk usage. I have started the SNMP service. Can anyone pls tell me the steps that has to be configured in snmpd.conf file to make the things work? Thanks in advance. Ram
config file manager problem
Hello, My system configuration is as below. Version of the product: OpUtils Bulid 4301 Operating System: Windows Xp SP2 JDK/JRE Version: JRE 1.50 Browser and Version: IE 6.0 I am facing problem in this particular tool named "Config File Manager". I set up a demo using cisco router 2600 and cisco router 2800 and cisco switches 2820 series. Cisco 2600 router and 2800 IOS version is 12.2 and 12.4 respectively. Cisco swtches uses version 7.0. Problem 1: I managed to capture the config file for the router
Moving Oputils to another server
Hello, I have a new server that I want to move Oputils to, I upgraded the old version to the latest 4324 and the new install to the same, is it a matter of copying the OpUtilsDB.fdb file over to the new server and starting OPUtils?
IP manager
I need to be able to add in IP addresses manually, is this possible? I want the option to manually as well as scan for live IPs, possible?
E-Mail Rogue Device Report Blank
When I click on the link to e-mail the rogue device report it sends only a blank .pdf. Any suggestions?
ip address managment
Is there a way for me to add the subnets to the ip address managment when i retrive the subnets list from a router. That way i don't have to enter each subnet one by one.
promt for proxy login
Everytime I click on the "Tools Home" I gat promted to key in my "proxy" username and passowrd. I have upgraded to my profession edition so I don't understand why me moving around in the software requires me to connect thru my proxy server to your site.. for some sort of hidden "monitoring" of your software like spyware.. Can this be removed or disabled???????? John Gartley
Subnet lists
We currently are using UTN connections to all our major nodes within or Network. I'm trying to get a list of all our used subnets, would be nice with the description field for each subnet off the router or switching device when found if possible or even the interface identification. Can this be done and if so please send me how too, I'm doing an evaluation of the product. Richard Weigel
CSV Import for Global Environment
I requested the CSV import feature for switch port mapper. I would like to see the same feature applied the Global Environment for adding Devices and Subnets.
System Name
If I change the name of my windosw system do I need to do anything in the oputil software license key to reflect the name change?
reg. community
Res. Sir. At every stage it asks comunnity password with out that it dasn't go ahed nmshingote
FBserver is taxing the processor
FBserver and java is making the proccessor zoom at 100% utilization. I have this on a server that has a 1.4 Ghz processor and 4 gig of Ram. We just patched the SQL to the latest security update and it still has not gone down. Can you tell me what we can do to get this to run properly? Thanks, Mark
smtp - cannot query any devices? pls help
hi guys, ive recently been asked to configure our opsmanager6 to monitor windows services on various local windows2003 servers we have. after reading the opsmanager manual and trying to setup the servers smtp service & setting up the server on opsmanager I have hit a brick wall. I have added the server on opsmanager and added the required smtp passwords etc but whenever i click on "windows service monitor" and click on the link to auto scan for running services on the server, it comes back with "access
View per page
In the switch port mapper, is there a way to make the "view per page" to default to 100 instead of 25?
Configure SMTP for Alets "E6002: Unable to send mail.&q
I have tried several different mail servers and I just can't get it to work. Gmail uses port 465 for smtp and user authentication. I know I missing some thing but I'm no sure what?
Community strings
Even though I had 3 different community strings set in my "SNMP" settings value.. every time I use a tool that requires the "Community" value.. I usually have to type in the community string for that system/device.. SNMP Ping... System Snapshot.. Can the tools simply use the default 3 snmp communities I put in for the SNMP settings value? and not always ask to input a community string??
IP Routes
Hi i am just trying to get the information using the IP routes option to find out the cdp neibhour information, but i am getting this below error can you help me to sort this issue out please. Tag 'insert' can't insert page '/cisco/IpRoutes.jsp'. Check if it exists. For input string: ",d" yoga
Required firewall ports
Which ports should be open for us to manage/monitor servers on another network? I am aware of responses to similar question, in relation to other products. I seek a response specific to OpUtils.
Monitoring a specific Windows service
How could we monitor specific Windows service(s), and be alerted when the service goes down?
Custom reports
We are new OpUtils customer. Could we somehow create custom views as follows: View 1: CPU Usage of all servers View 2: Bandwidth Usage on all servers etc.
Cisco Chassis - SUP/Interface board info
Is there a way to also gather information on the supervisory/ethernet/gigabit/ interface boards in a Cisco 6506 or 4700 chassis
Cisco 3750 Switches (Stack information)
Is there a way to also gather information on the other switches that in a stck configuration of a Cisco 3750x switch setup.. Inventory of all the switches in a stack.. as well as Cisco Tools.. Device Snapshot.. Chassis..even on the monitoring.. would be nice to know if one of the switches in the stack failed..
am new
i want cisco device name befits feturea all router/switch/........... all device form cisco plz kiran
Cisco Interfaces - Trial version
Hello, I am using the trial version of OpUtils. Under the Cisco Tools options I am viewing the Interfaces option. While viewing the descriptions of the ports only the port descriptions for the SUP module display data on the percentage meters (Input Utilization & Output Utilization). All of the other ports (GE & TENG) do not show any performance on the percentage meters. Is there a setting I am missing? Thanks! Mike
Switch port mapper maximum number of switches
Hi Is there a number of switches that is considered to be the maximum that the switch port mapper will comfortably support? Hardware limitations, or software limitations? Regards Bob
SNMP in 3COM routers
Hi All, I am using Opmanager v6.0. I have sucessfully added our core cisco router but failed to add branch 3com routers. Calculation of uptime becomes diffiult as i m unable to apply time restrictions to individual router. When i add it at port 163 it adds the router as a PC in place of Router. Do i have to do some extra setting in router or Opmanager. Please let me know Regards Hitesh Raul
Error view alerts
Can't view alerts, here is the error message that I get: [ServletException in:/framework/globalAlerts.jsp] com.adventnet.customview.CustomViewException: Exception : GDS Exception. 335544335. database file appears corrupt () bad checksum checksum error on database page 14066 while processing request' Pleaes let me know what to do. Thanks, Mark Kraus 732-346-6799 mark.kraus@lvmhuspc.com mkrauser
smnp
Hi we would like to setup our network to be monitored but it keeps asking use for a comunity what is this? where do we find this? James
SOFTWARE
Can Some one suggest this software is also helpfully to monitor users
IP Availabiliy
On the summary view of IP Address Manager, the IP addresses are listed diag and are too big for the bar char on the x axis that the address xxx.xxx.x.0 the "0" is wrapped to the next bar.
Knowledge Base
Hi All, We have updated the Knowledge base with more topics, please refer the below page for more details: http://manageengine.adventnet.com/products/oputils/knowledge-base.html Thanks Mathi
View per page.
in IP Address Manager as I create the subnets to scan. I set "view per page" pull down from default of 25.. to something else like 100... and as it scans it resets the drop down back to a default of 25.. this happens in other tools where there is a default "View per page" also john gartley
View per page.
in IP Address Manager as I create the subnets to scan. I set "view per page" pull down from default of 25.. to something else like 100... and as it scans it resets the drop down back to a default of 25.. this happens in other tools where there is a default "View per page" also john gartley
Next Page