Advice regarding opUtils
Hi, Currently evaluation OpUtils. Configured a Dell Switch Stack to monitor which has in total 96 ports across the 2 switches (48 in each) Yet, in the Switch Port mapper, it says I have 306 total ports, 240 being used (when there are actually only 32 in use across the stack. Can you advise on this? Also do you plan to add Dell PowerConnect switch support in soon? It would be really nice to see port numbers/unit numbers as opposed to "EthernetCSmacd" in the Ifname field. Fantastic product if I can
I need Rogue Scan to check realtime or more often. like ever
Help. 1) need Rogue Scan to check realtime or more often. like every 10 min or so. 2)How do I remove systems from my rogue allowed portion. Me
OpManager: Alerts when a service is down doen't send a msg
Hi, I'm evaluating your tool Op Manager. I have installed it successfully. I configured maill server and I made a test and it works. I insert a device that's a SUN server and opManager see it. Additionally I inserted one INFORMIX service and it's well configured I monitored by OpManager. But when I take down INFORMIX mail alert wasn't sent and it's shown in OpManger . I considered to create a profile to send this message previously. Thanks for your help.
Who is using the broadband
Hello I am evaluating your product and In my network i need to know who of my users are loading heavy the link therefore i want to ask you Does your tool can do something to help me , i want to be honest and i do not have an idea about how is it work, As a comment We have 4 switch 3com baseline 2426PWR plus ( 3C16491 ) Cisco router 1800 Server Windows 2003 Server R2 Firewall SG565 3com NBX 3000 Enrique Cedillo
Possibility of changing Alert Email Subject and other config
Im not entirely sure how to configure many things. Is there a GUI to the DB where all the settings are stored or is it in the XMLs ? The Help says nothing about this (that i can find). I need to change the Subject of the Emails sent by various Alerts. For example "Critical" and "Normal" should be the first word not the last in the subject so that i can quickly check on the blackberry, for example. Also, if i want the alerts to be sent only after 2 failures/misses to poll a server. Where can i change
Delete alerts and Bandwidth Monitor problems
Hello, I am having trouble with the following: Deleting Alerts, I had 3000 ip address manager alerts plus some others. I was able to delete the others by slecting the alert and deleting all. But when I try that with the IP adress Manager the screen blinks but they are still there. Also with Bandwidth monitor, I have Cisco 4003, 4006 and 3550's, I am getting "NO DATA AVAILABLE" I tried V1 and V2 but nothing came up days later. Since you are asking for new features, in the switchport mapper, I really
OID's of varbinds
Hello, Is there any provision to display the OID of the varbind of a trap. Currently it is showing the varbind name : varbind value. it would be better if we have one more column in the Trap receiver screen for varbind OID. Thanks, Rajashri. rajashri
Mib Browser does not show exact errors.
Hello, MIB browser does not show line number which caused the problem while loading MIB in the MIB database. It just displays the message : Unable to parse MIB file - MIB file name. This is quite time consuming process for user to go through complete MIB (as user has no idea where the exact problem is and check for any errors. If it is able to display the line number (approx), that would be better for user to directly search for specific lines of MIB. Such kind of provision is available for other
switch port mapper
is it possible to add more than one router to the switch port mapper? i have vlans on my switches which are routed by different routers. due to this not all mac adresses are mapped to their ip(because i can only add 1 router address) stieven struyf
Import list into Config File Manager
Is it possible to import a list of Cisco devices into Config File Manager like you can with Switch port mapper? If not, could you add it in a subsequent release?
Wake On Lan Broadcast
Hi, Does the Wake On Lan utility in OpUtils do broadcast or unicast? I want to be able to go across subnets, but at the same time I don't want to open my network up all the way by allowing UDP port 7. Thank you for your help in advance. Thanks, Ashley
Feature Request!
In the performance monitor, I would like to choose an interface based on the port Alias or the port name, instead of the port index. Ex. select the name: Gi5/1 It would also be nice to constantly monitor a device, even after logging out, similar to the way the network monitor works. This way I can go back and see if there have been any errors/discards over the last week or month. Thanks!
Issue with Cisco switch reportin ports
According to the "Port Availability Report", I have a 48 port Cisco 3548XL switch that has 82 transient ports and 18 used ports. This would result in a 100 port switch. This switch is only 48 ports. This report also states I have a Cisco 296048T switch with 40 avail ports, 48 used ports, and 12 transient. This would also be a 100 port switch, which is actually 48 ports. Your Port Availability Report is entirely too inaccurate to be useful. Chris Schear
PROBLEM USING BANDWIDHT MONITOR
Hi, Iam usingbandwidth monitor under the head of network monitoring tools. earlier i was facing the error 2001 bt any how i had resolved that error bti amfacingthe error number 2005 and noti[s are given to resolve this error. I will be seeking your help in resolving this issue. Thank You Navneet Singh navneet
deleting admin account
Hi I've just bought a 1 user licence for OPUtils. I want to delete the admin account and create and account that only I know the username and password. How do I do this? I can't see anywhere to delete the admin account and until I do I cant create another account as I only have 1 user licence. With the ability of OpUtils to be able to upload a config to a device its too much of a security risk to have the default username and password on the login page. Any help would be appreciated
Rogue Detection Question
Can you explain the process for Rogue Detection? I was wondering why detected hosts show either unknown or learned by switches but not directly connected in the switchport field? I would think part of this is because multiple devices are on the same port (assuming a trunk port).
Config File Manager
Is there any way that you all could possibly make the option for maximizing the window when comparing config files in the config file manager. I know it's something little, but it would make it easier instead of scrolling back and forth or copying and pasting to something else. Thanks, Ashley
Purchase Oputils
Dear Sir, Kindly reuest to inform the details proceedures to purchase the Oputils network monitoring tools and the contact dtails in Saudi Arabia Regards Usman Kurupath Sadafco Saudi Arabia
Cisco Config File Manager
Hi, Can I setup what OpUtils backup: Running OR Startup config , and number of backup config.
feature request
Is a search feature in the plans for Oputils? I would be a great feature to have the ability to search for a dns name, ip address, or mac address and pull up all the applicable data associated to the search. Glenn Rowe
Cisco 3524 Switch Problem
I'm having a problem that I'm only having on Cisco 3524 switches. I only have 4 of these switches remaining on my network and all 4 are showing the problem. What happens is on Switch Port Mapper the 3524 switches are always refreshing.
User Exclusions
Is there a way to limit the tools that a specific user can use? Or is it pretty any person who logs in can use any tool? If that is the case, is there any timeframe on when/if a feature like this would be implemented? Thank you!
Cannot add MIB
Hai, i'm trying to add new MIB like attached, but it contain an error and failed to load. I have tried on other software tool and it can load the same mib, pls advice.
Windows ALERT not see with FireFOX 2.0.0.3
Windows Alert not see with FireFox 2.0.0.3 and a resolution 1280x1024
OpUtils - Build 4312 Available
Dear All, We are pleased to announce the availability of the latest update to OpUtils - Build 4312. Features & Enhancements in Build 4312 1. Support for retrieving the Config Files of Cisco devices running CAT OS has been included. 2. Option to import switch inputs to the Switch Port Mapper tool from a CSV File has been included. 3. Switch Port Mapper enhanced to show the MAC addresses other than "learned" state. 4. Issue in displaying the Alert count when accessing the client from remote has been
Config File Manager
Hello, I try to collect my ciscos and switchs configuration. I have configured both @IP and SNMP community (Read/write) When I want to get the configuration using Refresh, I obtain an "Config file retrieved successfully" but nothing has been collected. Have you some recommandations? HAND, Thierry Simon thierry Simon
Switch port Mapper Question
Why would almost all my Cisco switches not show MAC address, IP address, or DNS information? All Enterasys switches show me the MAC address, IP address, and DNS information and they are setup the same way (correct SNMP and router is added). The Cisco switches do provide all the other fields (ifindex, ifName, IfDescr, IfType, IfSpeed, Status, Availability, and Vlan) and one or two ports (almost always trunk ports) will show all fields, but 95% of ports don't. All my other tools (CiscoWorks, Solarwinds
Can't reinstall switch once delete in Switch port mapper
Hello, I changed a switch out for another model and rediscovered it. The old switch had 32 ports, this one has 12. Once I rediscovered it the 12 ports were right for the new switch, but still had 13-32 of the old switch as port of the mapping. I tried deleting the switch and re-adding it. But now it says that the switch already exists. I stoped and started the oputils and rebooted the server. What's next? Also the export feature still give the summary. Please let me know what now? Thanks
transfer to another system
Hi , I've trialed this software on my laptop and if we go ahead and purchase I'd be looking to transfer it to a server. Is it possible to transfer the database i.e all the approved devices in rogue detection etc, to another system or will I have to start from scratch again on a new machine?
MIB for 3Com 7750 and 4500
Hi, I am looking for 3Com 7750 and 4500 MIB's. JMK falkon@hispeed.ch
TFTP Server Tool Included
Dear All, We are pleased to inform you that the latest update to OpUtils, build 4303, includes the TFTP Server tool. The TFTP Server has the following abilities: 1. Download the startup and running config files from the Cisco devices. 2. View the downloaded config files. 3. Change the TFTP Root directory. 4. Edit the downloaded config files. 5. Upload the config files back to the devices.Refer to http://manageengine.adventnet.com/products/oputils/service-packs.html for details and download instructions
network monitoring question
Does Oputils 4 have the ability to present a current overall view of my cisco network and can it email if a service goes down? Vern Pruden
OpUtils now supports Windows Vista
Dear All, Support for running OpUtils in Windows Vista has been included in our latest update. Refer to http://manageengine.adventnet.com/products/oputils/service-packs.html for details and download instructions to upgrade to the latest version. Thanks & regards, Ananth
Storing history of network scans
Hello, We are using OpUtils 4 Professional edition. We have scheduled network scan in IP address manager tool every night. We would like to store scan results automatically and analyze scan results over period of time. Is there a possibility to do this in software?
Alerts
Hi, Is there a possibility to disable alerts for specific tool (ie. Ip Address Manager)? Also, is there a possibility to choose which alerts will be shown in global alerts list? radule
update to 4037
I'm on windows and I've downloaded manageengine_oputils_4_0_wp-3_0_8.ppm I'm trying to update from 4018 What am I suppose to do with the ppm file? Don't I need a bat or exe or something to update this?
SNMP is enabled, but no response to SNMP queries
I am trying to monitor several servers, all have SNMP enabled in their services list, yet when I try to check the details of each one, it comes up with "No response to SNMP queries. ICMP is enabled." under Status. The location, contacts, etc. come up with "Does not respond to SNMP queries." Is this some setting in your software or do I have to enable/disable something on our servers? Thanks.
SNMP settings
Hello, In OpUtils 4 Professional, what is the relation between SNMP settings in software with settings of SNMP Service and SNMP Trap service on Windows Server 2003. Thanks.
Oputils - WiFi Manager conflict
I have oputils 4305 and WiFi manager 5500 running on the same server. When I am accessing both via a web browser from a remote client they log each other off. For example, If a WiFi manager browser is open, and I open Oputils, when I go back to wifi manager I need to log in again, then if I go back to oputils I need to log onto that again. This happens immediately, and I have session expiration for both set to never. I think this started occurring with build 4301 in oputils, but I am not sure. Thanks,
Build 4303
I upgraded to 4303 last week, and oputils failed to start. Backed out the upgrade, and it worked fine. I saw that 4304 was available, upgraded and now it is free edition only. I tried applying my license, but it says 'please apply a proper license" (but it works OK with 4300 and 4301). Thanks, Gene
Next Page