OpUtils enhancement
I think the Trace Route tool can be enhance by allowing a continuous trace on a device and maybe setting up some kind of a alert if the path changes. This would be useful gengg
Add Cisco Router - 'Prompt'?
I am adding a Cisco Router, what do I need to put in the Prompt field?
Bind OpUtils to secondary IP on server??
I have two IPs on my server. Is there a way to bind all of OPUtils and its associated services to the secondary IP address? I already have other SNMP server/TFTP on primary IP...
Network Report
I would like to see a total uptime / counter as to how long a network or device has been availble to the customer. Is there such a report for total uptime? Richard Brown
OpUtils using SNMPv2c
is there an issue with using the "+" character in the community string? we are havign issues discovering routers/switches with our new snmpv2c comm string. Other app software is having no issues. gengg
Blank reports after upgrade to 5
I just upgraded to version 5 and I am having an issue again with my report exports to .pdf, and .html showing up blank. I seem to remember a hotfix fixing this issue with version 4. Is this a different issue with the 5 upgrade?
OpUtils 5 Released
Dear All, We are pleased to announce the release of OpUtils 5. The key features and enhancements of this release include: 1. Wake on LAN tool enhanced to include multiple groups of devices that can be scheduled differently. 2. Important tools are moved to tabs for easy navigation 3. The left tree will be removed for better tool visibility 4. All the Server Monitoring tools and Cisco Tools are merged into one for ease of use. 5. Switch Port Mapper enhanced to include the ability to group switches.
Upgrade Pack to OpUtils 5 is Available
Dear All, We are pleased to inform you that the upgrade pack from OpUtils 4 to OpUtils 5 is available. Who should Upgrade? Customers using build numbers 4413 and below. How do I locate the current version for OpUtils? 1. In the Web Client click the "About" link on top right of the page 2. You should see the Release Version along with the Build NumberThe Upgrade pack can be downloaded from http://manageengine.adventnet.com/products/oputils/service-packs.html Thanks & regards, OpUtils Team
Oputils 5.0 - Network Monitor Listing - Minor Issues
It would be helpful to allow the network monitor list to be sorted by alias name. Additionally, when sorting by Response Time, the list is being sorted on an alphnumeric basis when it should be sorted on a numeric basis (response time in ms). Also, the response times are listed as 4.0, 3.0, 2.0, etc. There is never a value in the tenths field say for instance 4.1, 3.2, 2.4 etc. Is this an oversight?
Custom Reporting with OpUtil 4
Hi All, Can you please help me on how to create a scheduled and custom reporting on Oputil 4 Thanks, ARues
Config File Manager
Hello, When I use the Config File Manager Tool, It works on a router that I have, but it does not work on my switches. 3750 and 3560's in particular. It says "Config file retrieved successfully" but when I click on the S, R or compare, it comes up blank. I am running build 4413. Can you help? Thanks
Discovering SNMPv2 devices
we are having a hard time discovering SNMPv2 devices with OpUTILS 5, It does SNMPv1 no problem. When tryng to discovering v2c devices, OPutils just sits there. gengg
License View
We are currently using a trial version of optutils, we have not begun to use switchport mapper yet, so we are not sure how many interfaces that we would truly need when selecting a license. Is there a way to view what is currently in use? How does the licensing work if switch port mapper is not used?
Port scan
Another thing that I think would be useful , is if we had an option in the port drop down of "all in list" that would scan all the ports we have put in in the "configure ports" area. Thanks.
Switch Port Mapper stuck "In Progress"
I am attempting to use the Switch Port Mapper to scan a Cisco 6509 switch. I have successfully added the switch and SNMP community. I am scanning this switch now but it has been stuck at "In Progress" for nearly half an hour. Is this normal?
DHCP servers
I have problems getting some of my dhcp servers to get added. I tells me they do not have DHCP enabled but they do. And snmp is working as I monitor all of these servers in opmanager, etc. Also, some locations have a cisco 851 giving out dhcp, would be nice if I could monitor those. Thanks!
Rogue Detection -No DNS-
We are evaluating OpUtils4 and when we run the Rouge Detection and we are experiencing the following results: -Many of the entries are showing up with no DNS at all, just the MAC address and sometimes the IP address of device. -Many of the entries on the DNS name are showing up with the IP address. -There are many workstations that should have came up in the results on the scan yesterday, but did not show up until another scan today. -What does it mean in the "Switch Details" where it states many
Port mapper
I am having the same problem shaggy was having on Fri Feb 15, 2008 12:53 pm. I can not see any of the devices connected to my Cisco 2948G switches. Were you able to resolve the problem?
Note: Download description when add interface
I have interest in see the description name of interfaces that i add to Bandwidth Monitor. This characteristic is possible?
Autmoatical fill up oflist of subnets in Admin - Global Env.
Is there some way to automatically fill up list of subnets in Admin - Global Environment (via some SNMP scan tool or something like that). After entering one SNMP string of one of our routers (gateway) and performing various SNMP scans, we've got list of subnets in Admin - Global Environment section full of networks which we didnt enter manually. How is this possible? Thanks, Darko
Bandwidth monitor - traffic statistics on serial port
We cannot see traffic statistics on serial port of router, only on ethernet port. We see serial interface and subinterface in tool, but in and out traffic is zero. Router is cisco 1800.
SNMP version
In Admin - SNMP Settings section there is radio button to specify version of SNMP to be used. Is it possible to use some community names with SNMPv1 and others with SNMPV2c?
Rogue Detection Tool - detection of new devices
We are receving large number of alerts from Rogue Detection Tool, about detection of newly discovered devices. Devices are from subnets which are not listed in Global Environment section. How this is possible?
Switch Port Mapper
On our switches it only shows the ports that have a device plugged into it. It does not show any of the open ports. I am evaluating the product and I cannot justify buying it if this does not work. Thanks, Steve Mize stevemize
Configuration Archive
Is it possible to have the Cisco configuration backup retain more than a single backup of the startup and running configurations? It would be very nice to schedule a backup every 24 hours and have the display show each backup instead of it overwriting the previous backup. Also, is it possible in the Bandwidth Manager to write in a description for the interface being monitoring instead of just having the interface name? Finally, can the unit of measure be changed in the Bandwidth Monitor to use kbps
Custom tool to report firmware version
Forgive me if this is an ignorant question but I have a requirement to gather firmware versions from all my servers (Windows, Linux and Solaris). Would it be possible to use the custom tools feature to do this? I am not familiar enough with snmp to know. It doesn't seem to show it in the server monitoring system snapshot.
Switch Port Mapper
I am using OpUtils Build 4409. I have several switches mapped that return information on only a fraction of the ports. For example I have a Cisco 2950G that shows I have 2 ports used and the rest are listed as open or transient. I know for a fact that this is incorrect. There are at least 2 dozen devices connected to that switch.
switchport mapper issue
I recently upgraded to the latest version and now when I go into switch port mapper I get the following error on the screen. [ServletException in:SPMMainView.cc] Exception occured when trying to find the view configuration for the given view id : SPMScanning' I also can not put a server into DHCP monitoring. I get the error in the log: authenticationFailure 4 Thanks, Mark
Network Monitor email Notification
i already have setup this tool but, im having some troubles with this feature. i want it to send me an email everytime a device go down, i mean individually, but what it does it send email for everyone of the device im monitoring, also it send email of the Helaty Status. how do you se this tool to send just the one i need?
Switch Port Mapper: unable add forece10 S50 switch
when add a Force10 S50 switch, detecting never stop
Error Starting OpUtils - Linux
Hello, I have recently installed OpUtils 4 for evaluation on Enterprise Linux 5. I ran "startOpUtils.sh" script, and followed the instructions to install Firebird. Ran installation for firebird, with no errors. I then ran startOpUtils.sh again and the started fails with the following error: [root@dproscin-lnx bin]# ./startOpUtils.sh JAVA_HOME : ../jre SERVER_HOME : ./.. DATE : Mon Jan 21 16:37:56 PST 2008 Starting Server from location: /root/AdventNet/ME/OpUtils Problem while Starting Server !! System
Oputils build 4407 Switch Port Mapper
Was wondering if anyone has noticed some issues with the switch port mapper utility with the 4407 build. It is behaving much like it did a few releases ago. I am usually able to add switches just fine, but if I manually scan an existing switch, the scan goes and goes and will never stop. I am curious if there is a new bug in the tool. This could cause some havok on the port availability reports and what not. Any feedback would be appreciated. Thanks.
network monitor probs
Hi ive got a problem when i use network monitor that i add the ip add and it picks the correct host name etc. but when i pull the network cable out it still refreshes without an issue saying it is fine any ideas cheers
Problem ManageEngine running OpUtils 4
I downloaded install exe. Installation was successful. I Installed Service. I start program from Start / Programs. I see cmd window (probably starting the service). I see the blue pop-up splash window. Then nothing. I see icon in sys tray with a red "x" in lower right corner. I also sent support file to you which supposedly had the zip file of the event logs. Can you help? Thanks. Denis Grau
reports
i am unable to server monitoring report paul
file manage
is there a way to get the system resolve the DNS name for a switch? would help under the archive options eric huffman
About ios backup
Dear all, I am using a Oputils 4.0, Oputils Can download a IOS file of flash? Which extension name is .bin, If yes, What's a procedure of it. Please tell me a procedure of download a ios (.bin) file in oputils.
how to use it
i am unable to use this please mail me about this MOHAN
ROUTER IOS backup
Dear all, I have many Router and Switches of cisco, so I have a big problem of its ios backup. Any software are available int market, which is provide auto backup of all router and switches automatically.[
Problems with Alerts via Email of TRAPS
Alert from OpUtils Trap Receiver tool: Alert sent to: Name : linkUp OID : .1.3.6.1.6.3.1.1.5.4 Source : ***.***.***.*** Time Stamp : 279 days, 6 hours, 12 minutes, 15 seconds. Trap Received Time : Tue Nov 27 16:28:09 GMT-06:00 2007 Varbind values :- sysUpTime: 279 days, 6 hours, 12 minutes, 15 seconds. snmpTrapOID: .1.3.6.1.6.3.1.1.5.4 ifIndex: 33 ifDescr: GigabitEthernet6/24 ifType: 6(ethernet-csmacd) .1.3.6.1.4.1.9.2.2.1.1.20.33: up Varbind Desc :- linkUp : "A linkUp trap signifies that the SNMPv2
Next Page