password settings
When I enter account information using the format domain\\username, then I go back to that panel in the device properties, it always either drops one slash, or both. Is this just a display glitch, or does it actually mess up the setting? Also, got a server that I cant seem to add a disk graph for. I click on add, then go to the counter, then nothing ever, ever happens. Every other 25 times I did this, I would get a popup with a list of volumes to choose from. Not this time, it just sits there doing
business view in browser not populated
Is this normal behaviour? I just started an evaluation yesterda, so am new to the product. I can create a business view with the client, but when I click it in a browser, it just loads a pop box with the number of servers listed, but nothing in the box or anything. Do business views not load when using a browser? Thanks
Monitoring a firewalled server (which ports to open)
We'd like to monitor a Linux server that is running a basic software firewall (apf). As soon as we turn the firewall on OpManager is no longer able to capture CPU and Memory usage stats for that server. We have port 161 TCP/UDP open for both incoming and outgoing traffic on the firewalled server. Are there any other ports we need to open so OpManager can collect CPU and Memory utilization stats?
Removal Of Items On Logon Page
I would like to know how to remove the admin / admin data from the USER / Password fields on the login page. I would also like to konw how you turn off the hint line that you get at the bottom of the page saying the following: First time users : Use "admin" as User Name and "admin" as Password to login. Any advice that can be give on where to edit would be great. I have tried emptying the fields in the login.jsp in the common directory on the web client but it still post all the data. Thanks In Advance
Set "details" as default map view
Is there any way to set the default map view to "details" instead of "large icons"? We couldn't find any toggles for this in the web or java clients. What about directly chaning a DB value? Is this possible?
Discovery
Hi, Is there any way to initiate a discovery manually? I've currently changed the discovery setting to every 1 day, but I'd like to be able to (even via a script) manually kick off a discovery (perhaps just for a particular network) to see if OpManger discovers a device correctly. I know I can manually add a device, which may be the only way to do it.
Graph two mibs of the same interface
Hello, newbie question. Is it possible to graph two mibs parameters (i.e. Tx traffic and Rx traffic) of the same interface of the same device at the same time? I mean, when you select an interface and the select to graph a value like Tx traffic then you can select another device to compare but not the same interface with other mib value like Rx traffic. Thank you.
Additional Users
After trying another solution and not beeing please, i am back to test OPmanager again On Users Does the commercial license allows you to have unlimited users ? or must you buy per user licenses ? (if so, how much) if I have multiple users, can Admin setup servers so certain users can see and get notices on problems ? Null
Administrative Client problem
I applied the 5006 patch this morning, and since then I am unable to start the administrative client on the server. When I click on the shortcut, it simply does nothing. The shortcut is as follows: "E:\Program Files\AdventNet\ME\OpManager\jre1.4.1\bin\javaw.exe" -cp .\classes\OpManagerStartupClasses.jar com.adventnet.me.opmanager.start.OpManagerStarter StartOpManagerClient Where E: is the location of the OpManager install. Any suggestions? Thanks Andrew
Disk Usage reports
Hi All, Is there a quick way to add the "Free Space" and "Used Space" graphs to all of the servers? Thanks Andrew
Telnet in Web Client
Is there a way to add a Telnet option in the Actions box within the snapshot view? Thanks
Availability-Report from Cisco-Switches
Hello, how can I report the availability from Cisco-Switches? Thanks , G�nther fom Cologne (Germany)
Database backup
I've found a lot of information on backing up the database in Web NMS but nothing at all for OpManager. I'm looking to move my current DB from a windows host to a linux host. Is there a tool for this? I know it's a mysql DB, but there is no mysqlshow or mysqldump exe included, could I simply get executables and use those? Thanks!
OPmanager 5 - Graph View
Hello, Im monitoring a 3Com switch and when I go to Graph View it tells me that "no data is available". How can that be? It also shows only 4 of the ports as active (all 10mb) and the 2 (100mb) ports which are being used doesnt even show up in Op manager.
cpu Graphs - Linux RH
Hi, I'm running evaluation version on a win2000 box monitoring win and linux servers. all is going very well apart from one cpu graph display to a redhat box. at times i can see the graph but most of the time not. one way around it is to remove the graph and set it up again losing all data. after a time i loss the graph again. can you help? thanks wombatzz
How to delete all records and start again?
I started a discovery using a class B subnet mask and decided I should probably do the discovery using the VLAN class C addresses. I deleted the entries in the network area, however now when I try and add an address it tells me that the network already exists. Is there an easy way to delete it all and start again (I only installed it today, so losing the data is no great loss) Thanks Andrew
Pictures for new items?
Is there any way to add new pictures you can select for custom devices??? Thanks, Dan
CPU & MEMORY STATS ARE BACKWARDS?
My CPU & MEMORY stats, are completely backwards.... It shows my system at nearly 100% utilization of both memory and CPU nearly all the time as for some reason it is reporting the numbers backwards... Any suggestions? Thanks, Dan
custom service checks
Is it possible to write custom checking programs for OpManager ? Like define a webservice that requires a specific virtualhost, or a string to be displayed on connection to a specific port ? If so, where could I find the developer documentation ? John
Netscreen NS25 Firewall Monitoring
How do I monitor a Netscreen NS25 Firewall Vlans and other SNMP events like attack, IDS, VPN events and more from the firewall Does anyone know?
New switch Port Mapper
Kudos on the switch mapper function in opmanager I do have a few issues with it however. I have attached our network layout. When I map our dlink fiber switch in the core of the system, I get a very good map of the network. It tells me the devices attached to the baystacks attached to it, and the mac address, ip address, and dns name of every thing attached to them. It does not give what port they are attached to on the baystacks though. Also when I look at each baystack individually, I only get
opmanager hangs at configuring protocols
I have installed opmanager on a w2k server and when I try to start it up, it just hangs at configuring protocols. Any solutions?
I always get the message SNMP Traps can't be rxed on port ..
Hi I am using Win XP with SP1 on Dell D 600 Laptop with 512MB RAM & other specs. I installed OpMgr 5. When I run Opmgr 5, I get teh following message :- 1. SNMP Traps can't be rxed on port 162. Free the port or Stop the SNMP Trap service & Restart the server again. I have disabled teh SNMP Trap setting in teh Services under Computer Mgt. Still the above error persists. I am unable to run OpMgr5. I got the similar erro for Port 80 but could change it to Port 9000 & Port 8009 to port 9001. Q. How do
How to discover NWs remotely
Hi I want 2 use Opmgr5 as below scenario. I have multiple Hotspots. Each Hotspot has a Router - Gateway - Switches - APs in the order. I am able to COnfig Router & Gateway in OpMgr5 which have public IPs. However the switches & the APs r in a Pvt NW. Can I discover the Switches & APs map in the NW view? If yes, how. Pls explain & help
Cannot add services
We are in the process of actually purchasing opmanager and we are having some issues. 1) It will not allow us to add certain services which we know are running. On 30 machines it did not find FTP on the initial add. So we go to add it manually and it says it adds it fine but then its not in the list when we look. Is this a bug? Is there a fix? 2) We had some services report down that were not really down. I tried everything i could think of but couldnt figure out why. Anyone heard of this one? It
opmanager - openvms
Hi All, Has anyone setup opmanager to monitor openvms. I can monitor services but are unable to monitor cpu,mem or disk. snmp is running on the vms box. what is the setup for snmp.? what am i missing? can anyone help Thanks Wombatzz
Resource Utilization
Is there any definition to the performance counters especially CPU Utilization, Disk Utilization and Memory Utilization used by OpManager? Can I assume that they are the same performance counters used by windows? Thanks
OpManager 5 - Changing default port for SSH login
In order to get stats from non-snmp servers or Linux, you can fill in the login details on the passwords section of a device. Id like Opmanager to login to devices using SSH but I have devices which dont run SSH on port 22 but use anotther port instead. Is it possible to tell OpManager to connect on another port instead of 22? Dicky
OpManager NetFlow Support
Where can I download addon module for Netflow support? Do I need to install my own collector or it is included with your module?
Another issue with memory...
We have another issue already. We upgraded memory in a machine last night but we cannot figure out how to update the machine stats in opmanager. It still says the old amount and we cannot figure out how to update it. Any ideas ?
Custom graphs
I read a post in a different thread that talked about creating custom graphs that involved math functions to change something from bytes to kilobytes. The example they used was to create a custom graph with this in the oid field : <snmp oid>/($deltatime*1000). My question is, where would I find rules for how to perform mathematical operations on the data that is returned from a GET operation, and is it possible to combine multipe OID's into one operation for the purpose of a custom graph? i.e. <OID1>-<OID2>/<OID3>
Running as a Solaris daemon?
I need OpManager 5 to continue to run when I close out the terminal window. So far, every time I close the terminal window, the server processes terminate (gracefully). Could find nothing in the documentation. Evaluating on both Solaris 8 & 10. I have tried the Linux trick of "nohup sh StartOpManagerServer.sh &", but that had the same results. Any help provided would be greatly appreciated.
OPManager http Error
Hi, I am getting this error while trying to run opmanager http server. httpd: could not open document config file /home/kernel/satya/installed_apache/conf/httpd.conf can any body help me
Ping window command empty
I installed successfully OpManager on a Linux Box. Everything works well except Ping action command which popup an empty ping results window (only close button is displayed). Traceroute works fine and my devices are well detected (Up and SNMP-ed ) I look into logs files (in OpManager/logs dir) but nothing noticed.
Does OpManager support VLAN?
1. Can OpManager discover the devices across different VLAN? 2. Does OpManager provide a VLAN view?
integration of backend for configuration and events
We have been evaluating the OpManager for some of our Network monitoring requirements. I am interested in knowing how well it can integrate with a central database in terms of provisioning of new devices for monitoring without somebody manually adding them and more importantly reporting the per device events/alarms into a central database. If you can point me to specific information, it will be very helpful.
Linux: Pricess Dies ?
I'm using Opmanager trial on Suse 8.1 .. after maybe 15 or 20 minutes of inactivity thru the web interface, the opmanager process seems to simply .. DIE when I try to reach it again it's not available, and I have to start it again any ideas ?
Can I use OpManager to collect information about my routers
I want the OpManager to automatically save like a "show run" from my cisco routers. I remember being able to pull this info from SNMP but I'm unsure if OpManager can do it.
Network View versus Business view
Is it possible to transform an automatic network view (with all the networks), in business view ? My goal is to have the network view (very usefull as subnet icons are appearing) using the browser and not the client. Thanks,
Subnet change
When you add a router with a wrong subnet, it creates a subnet with that specific mask. Is it possible to change afterward the subnet mask of the device or network to correct ? thanks,
Next Page